How connect load this code in esp32

[ManikandanVaradharaj]

I'm using esp32 dev board,Now I need to load this code and need to connect with Tuya App,for these How can i implement

[ManikandanVaradharaj]

Check submodules.
TARGET=esp32
PROJ_NAME=sample_project_esp32
TARGET=esp32
CHIP=esp32
/home/smartbuild/tuyaopen/platform/esp32
Start board build_setup ...
IDF_PATH is empty
get_country_code ...
download esp-idf ...
Cloning into '/home/smartbuild/tuyaopen/platform/esp32/esp-idf'...
remote: Enumerating objects: 14886, done.
remote: Counting objects: 100% (14886/14886), done.
remote: Compressing objects: 100% (11621/11621), done.
error: RPC failed; curl 92 HTTP/2 stream 0 was not closed cleanly: CANCEL (err 8)
error: 942 bytes of body are still expected
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
STSTUS###################################
-- Now is UNIX-like OS's.
-- [TOP] Using framework [base].
-- [TOP] PLATFORM_PATH: /home/smartbuild/tuyaopen/platform/esp32
-- [TOP] Using toolchain file [].
-- The C compiler identification is unknown
-- The CXX compiler identification is unknown
CMake Error at CMakeLists.txt:72 (project):
The CMAKE_C_COMPILER:

/home/smartbuild/tuyaopen/platform/esp32/.espressif/tools/xtensa-esp-elf/esp-13.2.0_20230928/xtensa-esp-elf/bin/xtensa-esp32-elf-gcc

is not a full path to an existing compiler tool.

Tell CMake where to find the compiler by setting either the environment
variable "CC" or the CMake cache entry CMAKE_C_COMPILER to the full path to
the compiler, or to the compiler name if it is in the PATH.

CMake Error at CMakeLists.txt:72 (project):
The CMAKE_CXX_COMPILER:

/home/smartbuild/tuyaopen/platform/esp32/.espressif/tools/xtensa-esp-elf/esp-13.2.0_20230928/xtensa-esp-elf/bin/xtensa-esp32-elf-g++

is not a full path to an existing compiler tool.

Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.

-- Configuring incomplete, errors occurred!
See also "/home/smartbuild/tuyaopen/examples/get-started/sample_project/.build/sample_project_esp32/CMakeFiles/CMakeOutput.log".
See also "/home/smartbuild/tuyaopen/examples/get-started/sample_project/.build/sample_project_esp32/CMakeFiles/CMakeError.log".
make: *** No rule to make target 'example'. Stop.

[ManikandanVaradharaj]

96%] Built target tuyaos
Consolidate compiler generated dependencies of target tuyaapp
[ 97%] Built target tuyaapp
[ 98%] [EXAMPLE] Generate execute file [sample_project]
ERROR: /home/smartbuild/tuyaopen/platform/esp32/.espressif/python_env/idf5.2_py3.10_env/bin/python doesn't exist! Please run the install script or "idf_tools.py install-python-env" in order to create it
make[7]: *** [CMakeFiles/example_all.dir/build.make:76: build_example_exe] Error 1
make[6]: *** [CMakeFiles/Makefile2:507: CMakeFiles/example_all.dir/all] Error 2
make[5]: *** [CMakeFiles/Makefile2:514: CMakeFiles/example_all.dir/rule] Error 2
make[4]: *** [Makefile:173: example_all] Error 2
make[3]: *** [CMakeFiles/example.dir/build.make:70: CMakeFiles/example] Error 2
make[2]: *** [CMakeFiles/Makefile2:481: CMakeFiles/example.dir/all] Error 2
make[1]: *** [CMakeFiles/Makefile2:488: CMakeFiles/example.dir/rule] Error 2
make: *** [Makefile:160: example] Error 2

[flyingcys]

The problem seems to be that not all esp-idf files on the platform have been downloaded. You can delete esp-idf files on the platform and retry the automatic download

[Sindhuja-15]

@flyingcys which version should i need for these one.

[ManikandanVaradharaj]

@flyingcys /tuyaopen/examples/get-started/sample_project$ tos flash
--2025-01-16 14:27:10-- https://images.tuyacn.com/smart/embed/package/vscode/data/ide_serial/tyutool_cli.tar.gz
Resolving images.tuyacn.com (images.tuyacn.com)... 129.227.213.118, 101.33.16.239, 101.33.1.101, ...
Connecting to images.tuyacn.com (images.tuyacn.com)|129.227.213.118|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9756584 (9.3M) [application/octet-stream]
Saving to: ‘tyutool_cli.tar.gz’

tyutool_cli.tar.gz 100%[=================================================================>] 9.30M 4.91MB/s in 1.9s

2025-01-16 14:27:13 (4.91 MB/s) - ‘tyutool_cli.tar.gz’ saved [9756584/9756584]

tyutool params:
[INFO]: tyut_logger init done.
[INFO]: Run Tuya Uart Tool.
Usage: tyutool_cli write [OPTIONS]
Try 'tyutool_cli write -h' for help.

Error: Invalid value for '-d' / '--device': 'esp32' is not one of 'BK7231N', 'T2', 'T3', 'T5', 'RTL8720CF', 'RTL8720CM', 'LN882H'.

[ManikandanVaradharaj]

@flyingcys In tuya tool.gui,I don't have the option of esp32 to flash.

[ManikandanVaradharaj]

@flyingcys Can I use esp32 WROOM or esp32S3 module to connect with Tuya cloud

[flyingcys]

@flyingcys In tuya tool.gui,I don't have the option of esp32 to flash.

We are developing support for ESP32 series, should be supported by the next version conference, then choose the upgrade function on the software can be automatically upgraded.
@ManikandanVaradharaj

[flyingcys]

@flyingcys Can I use esp32 WROOM or esp32S3 module to connect with Tuya cloud

@ManikandanVaradharaj
Currently esp32/esp32c3 is supported, ESP32S3 has not been adapted and tested in detail for the time being, or can you help us implement ESP32S3?

[flyingcys]

@flyingcys which version should i need for these one.

The master branch already supports esp32/esp32c3
@Sindhuja-15

[flyingcys]

@flyingcys In tuya tool.gui,I don't have the option of esp32 to flash.

The tos flash command v1.8.x version already supports esp32 burning