build_nilabsent_MI-3G.config

### Target Vendor/Product (support only Ralink RT3883/MT7620/MT7621/MT7628)
CONFIG_VENDOR=XIAOMI
CONFIG_PRODUCT=MT7621

### Target ProductID (board select, max 23 ASCII symbols)
CONFIG_FIRMWARE_PRODUCT_ID="MI-R3G"

############################################################
### Linux kernel configuration
############################################################

### Force MT7621 CPU clock to 900MHz (override Uboot settings)
#CONFIG_FIRMWARE_CPU_900MHZ=y

# https://forum.ixbt.com/topic.cgi?id=14:63903:3988#3988
# Конфиг для Asus RT-AC1200GU: CPU/OCP/SYS frequency: 1200/400/300 MHz
#MT7621_DDR_1200MHZ=y
#MT7621_DDR_SPEED=11
#MT7621_CPU_880MHZ=y
#MT7621_CPU_FREQUENCY=1F4
#RALINK_DUAL_CORE_FUN=y
#RALINK_DUAL_VPE_FUN=y

### Include mt7621_cpufreq support ~0.005MB
CONFIG_FIRMWARE_INCLUDE_MT7621_CPUFREQ=y

### Enable MT7621 CPU sleep mode (downclock to 220MHz on idle)
#CONFIG_FIRMWARE_CPU_SLEEP=y

### Kernel driver select for WiFi AP 2.4GHz
### 4.1 = MT7603E v4.1.0.0
CONFIG_FIRMWARE_WIFI2_DRIVER=4.1

### Kernel driver select for WiFi AP 5GHz
### 3.0 = MT7612E v3.0.4.0
CONFIG_FIRMWARE_WIFI5_DRIVER=3.0

### Enable IPv6 support
CONFIG_FIRMWARE_ENABLE_IPV6=y

### Enable USB support
CONFIG_FIRMWARE_ENABLE_USB=y

### Include file system utilities
CONFIG_FIRMWARE_INCLUDE_FS_TOOLS=y

### Enable NTFS filesystem support via Paragon "ufsd" driver. ~0.4MB
CONFIG_FIRMWARE_ENABLE_UFSD=y

### Enable FAT/FAT32 filesystem support. ~0.1MB
CONFIG_FIRMWARE_ENABLE_FAT=y

### Enable exFAT (FAT/FAT32 too) filesystem support. ~0.12MB
CONFIG_FIRMWARE_ENABLE_EXFAT=y

### Enable EXT2 filesystem support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_EXT2=y

### Enable EXT3 filesystem support. ~0.2MB
#CONFIG_FIRMWARE_ENABLE_EXT3=y

### Enable EXT4 (EXT3/2 too) filesystem support. ~0.4MB
CONFIG_FIRMWARE_ENABLE_EXT4=y

### Enable XFS filesystem support. ~0.6MB
#CONFIG_FIRMWARE_ENABLE_XFS=y

### Enable Apple HFS+ filesystem support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_HFS=y

### Enable FUSE (filesystems in userspace) support. ~0.1MB
CONFIG_FIRMWARE_ENABLE_FUSE=y

### Enable swap files/partitions support. ~0.05MB
CONFIG_FIRMWARE_ENABLE_SWAP=y

### Enable hardware crypto support (if available). ~0.05MB
#CONFIG_FIRMWARE_ENABLE_CRYPTO_HW=y

### Enable dnsmasq regex feathure. ~0.04MB
CONFIG_FIRMWARE_ENABLE_DNSMASQ_REGEX=y

### Include UVC camera modules. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_UVC=y

### Include USB-HID modules. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_HID=y

### Include USB-Serial modules (e.g. pl2303). ~0.03MB
CONFIG_FIRMWARE_INCLUDE_SERIAL=y

### Include USB-Audio modules ~0.46MB
#CONFIG_FIRMWARE_INCLUDE_AUDIO=y

### Include XFRM (IPsec) modules & iptables extension ~ 0.2MB
CONFIG_FIRMWARE_INCLUDE_XFRM=y

### Include network QoS scheduling modules. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_QOS=y

### Include IMQ module for shapers (a bit of performance degradation, QoS is required). ~0.02MB
#CONFIG_FIRMWARE_INCLUDE_IMQ=y

### Include IFB module for shapers. ~0.03MB
#CONFIG_FIRMWARE_INCLUDE_IFB=y

### Include TPROXY module. ~0.005MB
#CONFIG_FIRMWARE_INCLUDE_TPROXY=y

### Include IPSet utility and kernel modules. ~0.4MB
CONFIG_FIRMWARE_INCLUDE_IPSET=y

### Include NFSv3 server. ~0.6MB
CONFIG_FIRMWARE_INCLUDE_NFSD=y

### Include NFSv3 client. ~0.5MB
CONFIG_FIRMWARE_INCLUDE_NFSC=y

### Include CIFS (SMB) client. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_CIFS=y

### Include Shortcut Forward Engine
CONFIG_FIRMWARE_INCLUDE_SHORTCUT_FE=y

### Включить сборку бэкпортированных драйверов для медиа устройств
#CONFIG_FIRMWARE_ENABLE_BACKPORTED=y
### Поместить бэкпортированный драйвера в образ прошивки
### (в противном случае они будут собраны в отдельный архив для размещения в /opt/lib/)
#CONFIG_FIRMWARE_INCLUDE_BACKPORTED=y

############################################################
### Userspace configuration
############################################################

### Include WebUI international resources. Increased firmware size
#CONFIG_FIRMWARE_INCLUDE_LANG_BR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_CN=y
#CONFIG_FIRMWARE_INCLUDE_LANG_CZ=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DA=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DE=y
#CONFIG_FIRMWARE_INCLUDE_LANG_ES=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FI=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_NO=y
#CONFIG_FIRMWARE_INCLUDE_LANG_PL=y
CONFIG_FIRMWARE_INCLUDE_LANG_RU=y
#CONFIG_FIRMWARE_INCLUDE_LANG_SV=y
#CONFIG_FIRMWARE_INCLUDE_LANG_UK=y

### Include NTFS-3G FUSE driver (instead of Paragon "ufsd"). ~0.4MB
CONFIG_FIRMWARE_INCLUDE_NTFS_3G=y

### Include LPR printer daemon. ~0.12MB
CONFIG_FIRMWARE_INCLUDE_LPRD=y

### Include ASUS/Eltima USB-over-Ethernet printer daemon. ~0.05MB
CONFIG_FIRMWARE_INCLUDE_U2EC=y

### Include USB-over-IP daemon. ~0.05MB
CONFIG_FIRMWARE_INCLUDE_USBIP=y

### Include "tcpdump" utility. ~0.6MB
CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y

### Include "socat" utility ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_SOCAT=y

### Include "ndisc6" and "rdisc6" utilities ~0.27MB
#CONFIG_FIRMWARE_INCLUDE_NDISC6_RDISC6=y

### Include "hdparm" utility (allow set HDD spindown timeout and APM). ~0.1MB
CONFIG_FIRMWARE_INCLUDE_HDPARM=y

### Include "parted" utility (allow make GPT partitions). ~0.3MB
CONFIG_FIRMWARE_INCLUDE_PARTED=y

### Include SMB (and WINS) server. ~0.6MB
#CONFIG_FIRMWARE_INCLUDE_SMBD=y

### Add support SMB2 ~0.8MB
CONFIG_FIRMWARE_INCLUDE_SMBD36=y

### Include WINS server only. ~0.4MB
#CONFIG_FIRMWARE_INCLUDE_WINS=y

### Include syslog for SMB and WINS server. ~0.3MB
CONFIG_FIRMWARE_INCLUDE_SMBD_SYSLOG=y

### Include testparm for SMB server. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_TESTPARM=y

### Include FTP server. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_FTPD=y
CONFIG_FIRMWARE_INCLUDE_FTPD_SSL=y

### Include alternative L2TP control client RP-L2TP. ~0.1MB
CONFIG_FIRMWARE_INCLUDE_RPL2TP=y

### Include EAP-TTLS and EAP-PEAP authentication support. openssl ~1.2MB, wpa_supplicant +0.04MB
CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y

### Include HTTPS support for DDNS client. openssl ~1.2MB
CONFIG_FIRMWARE_INCLUDE_DDNS_SSL=y

### Include HTTPS support. openssl ~1.2MB
CONFIG_FIRMWARE_INCLUDE_HTTPS=y

### Include sftp-server. openssl >=1.1 ~1.2MB, sftp-server ~0.06MB
CONFIG_FIRMWARE_INCLUDE_SFTP=y

### Include dropbear SSH. ~0.3MB
CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y

### Make the dropbear symmetrical ciphers and hashes faster. ~0.06MB
CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y

### Include OpenSSH instead of dropbear. openssl ~1.2MB, openssh ~1.0MB
#CONFIG_FIRMWARE_INCLUDE_OPENSSH=y

### Include OpenVPN. IPv6 required. openssl ~1.2MB, openvpn ~0.4MB
CONFIG_FIRMWARE_INCLUDE_OPENVPN=y

### Include StrongSwan. XFRM modules ~0.2MB, strongswan ~0.7MB
CONFIG_FIRMWARE_INCLUDE_SSWAN=y

### Include AmneziaWG kernel module and utilite. ~0.11MB
CONFIG_FIRMWARE_INCLUDE_AMNEZIAWG=y

### Include Wireguard VPN module and utilite. ~0.1MB
#CONFIG_FIRMWARE_INCLUDE_WIREGUARD=y


### Include Elliptic Curves (EC) to openssl library. ~0.1MB
CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y

### Include "openssl" executable for generate certificates. ~0.4MB
CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y

### Include xUPNPd IPTV mediaserver. ~0.3MB
CONFIG_FIRMWARE_INCLUDE_XUPNPD=y

### Include Minidlna UPnP mediaserver. ~1.6MB
CONFIG_FIRMWARE_INCLUDE_MINIDLNA=y

### Include Firefly iTunes mediaserver. ~1.0MB
#CONFIG_FIRMWARE_INCLUDE_FIREFLY=y

### Include Transmission torrent. openssl ~1.2MB, transmission ~1.5MB
#CONFIG_FIRMWARE_INCLUDE_TRANSMISSION=y

### Include Transmission-Web-Control (advanced WebUI). ~0.8MB
#CONFIG_FIRMWARE_INCLUDE_TRANSMISSION_WEB_CONTROL=y

### Include Aria2 download manager. openssl ~1.2MB, aria2 ~3.5MB
#CONFIG_FIRMWARE_INCLUDE_ARIA=y

### Include Aria2 WEB control. ~0.7MB
#CONFIG_FIRMWARE_INCLUDE_ARIA_WEB_CONTROL=y

### Include TOR proxy ~2.3MB
CONFIG_FIRMWARE_INCLUDE_TOR=y

### Include GeoIP database info for TOR proxy ~1.1MB
CONFIG_FIRMWARE_INCLUDE_TOR_GEOIP=y

### Include IPv6 GeoIP database info for TOR proxy ~1.1MB
CONFIG_FIRMWARE_INCLUDE_TOR_GEOIPV6=y

### Include OBFS4 for TOR ~6.1MB
#CONFIG_FIRMWARE_INCLUDE_OBFS4=y

### Include Privoxy proxy ~0.3MB
CONFIG_FIRMWARE_INCLUDE_PRIVOXY=y

### Include DNSCrypt proxy ~0.5MB
CONFIG_FIRMWARE_INCLUDE_DNSCRYPT=y

### Include Stubby DNS-over-TLS (DoT) ~0.4MB
CONFIG_FIRMWARE_INCLUDE_STUBBY=y

### Include doh_proxy DNS-over-HTTPS (DoH) ~0.5MB
CONFIG_FIRMWARE_INCLUDE_DOH=y

### Include Curl support ~0.15MB
CONFIG_FIRMWARE_INCLUDE_CURL=y

### Include QUIC support in Curl, openssl 3.5 required ~0.05 MB
CONFIG_FIRMWARE_INCLUDE_QUIC=y

### Include QUIC support in Curl using ngtcp2, openssl 3.5 required ~0.16 MB
CONFIG_FIRMWARE_INCLUDE_QUIC_NGTCP2=y

### Include other versions of openssl instead of the default 3.0
### openssl 1.0.2u
#CONFIG_FIRMWARE_INCLUDE_OPENSSL_10=y
### openssl 1.1.1w
#CONFIG_FIRMWARE_INCLUDE_OPENSSL_11=y
### openssl 3.5
#CONFIG_FIRMWARE_INCLUDE_OPENSSL_35=y

### Include WPAD support
#CONFIG_FIRMWARE_INCLUDE_WPAD=y

### Include compressed memory support
CONFIG_FIRMWARE_INCLUDE_ZRAM=y

### Add adb package
#CONFIG_FIRMWARE_INCLUDE_ADB=y

### Include LUA support ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_LUA=y

### Include EoIP Ethernet Tunnels over IP ~0.01MB
CONFIG_FIRMWARE_INCLUDE_EOIP=y

### Include KMS Activation support ~0.06MB
CONFIG_FIRMWARE_INCLUDE_VLMCSD=y
### Include mt7621_cpufreq support ~0.005MB
CONFIG_FIRMWARE_INCLUDE_MT7621_CPUFREQ=y

### Include NFQWS support ~0.1MB
CONFIG_FIRMWARE_INCLUDE_NFQWS=y

### Include NFQWS2 support ~0.3MB
CONFIG_FIRMWARE_INCLUDE_NFQWS2=y

### Include qrencode ~0.02MB
#CONFIG_FIRMWARE_INCLUDE_QRENCODE=y

### Include iPerf3 support ~0.06MB
CONFIG_FIRMWARE_INCLUDE_IPERF3=y

### Reduce trx image size
#CONFIG_CC_OPTIMIZE_FOR_SIZE=y

### Include redsocks2 ~0.05MB
CONFIG_FIRMWARE_INCLUDE_REDSOCKS2=y

### Include router vendor icon to web interface
CONFIG_FIRMWARE_INCLUDE_VENDOR_LOGO=y