Growatt: Which sensors are you using for energy dashboard - Mine looks strange

[nilaz]

I suspect that battery charging is counted in "Untracked consumption" in Home Assistant Energy Dashboard.
This is my Now tab in Energy Dashboard:

I measure a lot of consumers in my house. Still power flow looks like the picture above.
I suspect that the battery charging is counted in the "Untracked consumption but I'm not sure.
I have a Growatt MID 15KTL3-XH inverter and Growatt battery.
In the energy dashboard I have configured it like this:

Energy dashboard config	Sensor in SolaX
Energy Import from Grid	Total Grid Import
Energy exported to	Total Grid Export
Power imported from grid	Total Import Power
Power exported to grid	Total Export Power
Solar production energy	Total Solar Energy
Solar production power	PV Power Total
Energy charged into the battery	Total Battery Input Energy
Energy discharged from the battery	Total Battery Output Energy
Discharge power	Battery Discharge Power
Charge power	Battery Charge Power

Are you using the same sensors or have I made mistakes?

/Niklas

[vsurao]

not sure its related, with my Growatt inverter, I find that the grid import values per 'todays grid import' doesnt match the consumption as claimed by the energy retailer. However in the shine app, the daily consumption graphs appear to report more reasonable numbers.
I even tried to use left integration with the real time consumption sensor (total import power) , this appears to match what 'todays grid import' is reporting (usually off by 10-20%).
So its possible that just like me, the net grid import being calculated using the total import power is just wrong and growatt is doing something in the back end to address this that is not exposed via modbus.
Several theories on the internet as to why this may be happening , including incorrect CT clamps and Growatt including reverse power (I dont fully understand it, something to do with grid stability) in import numbers.