Import from Text / CSV rarely works and freezes Excel

[kamping22]

What happened?

When you try Data -> From Text / CSV and pick a .csv file from the dialogue, Excel freezes 9 out of 10 times. Sometimes after some time you can see a window popup saying 'Connecting Please wait while we establish a connection to ....csv', sometimes not, sometimes even the import window is visible but freezes and in very rare cases it works. I tried a local file on the VM and a file from virtioFS share, no difference. If I open the VM through virtual machine manager the import works every time.

Your FreeRDP version and where you got it from

3.15.0+dfsg-2.1 (from http://deb.debian.org/debian trixie/main)

Your Linux distribution and version

Debian Trixie

Your winapps.conf

##################################
#   WINAPPS CONFIGURATION FILE   #
##################################

# INSTRUCTIONS
# - Leading and trailing whitespace are ignored.
# - Empty lines are ignored.
# - Lines starting with '#' are ignored.
# - All characters following a '#' are ignored.

# [WINDOWS USERNAME]
RDP_USER="xxxx"

# [WINDOWS PASSWORD]
# NOTES:
# - If using FreeRDP v3.9.0 or greater, you *have* to set a password
# - RDP_ASKPASS is provided as a more secure option to RDP_PASS:
#   - Calls an external command and uses its stdout as the password
#   - The password is not passed on the command line to freerdp, keeping it out of logs
#   - If specified, takes precedence over RDP_PASS
#   - Examples to use this:
#     - RDP_ASKPASS="~/some-custom-command"
#     - RDP_ASKPASS="bash -c 'cat ~/.some-secret-file'"
#     - RDP_ASKPASS="bash -c 'kwallet-query --folder winapps --read-password rdp kdewallet'"
#
RDP_PASS="xxxxx"
#RDP_ASKPASS=""

# [WINDOWS DOMAIN]
# DEFAULT VALUE: '' (BLANK)
RDP_DOMAIN=""

# [WINDOWS IPV4 ADDRESS]
# NOTES:
# - If using 'libvirt', 'RDP_IP' will be determined by WinApps at runtime if left unspecified.
# DEFAULT VALUE:
# - 'docker': '127.0.0.1'
# - 'podman': '127.0.0.1'
# - 'libvirt': '' (BLANK)
RDP_IP=""

# [VM NAME]
# NOTES:
# - Only applicable when using 'libvirt'
# - The libvirt VM name must match so that WinApps can determine VM IP, start the VM, etc.
# DEFAULT VALUE: 'RDPWindows'
VM_NAME="RDPWindows"

# [WINAPPS BACKEND]
# DEFAULT VALUE: 'docker'
# VALID VALUES:
# - 'docker'
# - 'podman'
# - 'libvirt'
# - 'manual'
WAFLAVOR="libvirt"

# [DISPLAY SCALING FACTOR]
# NOTES:
# - If an unsupported value is specified, a warning will be displayed.
# - If an unsupported value is specified, WinApps will use the closest supported value.
# DEFAULT VALUE: '100'
# VALID VALUES:
# - '100'
# - '140'
# - '180'
RDP_SCALE="100"

# [MOUNTING REMOVABLE PATHS FOR FILES]
# NOTES:
# - By default, `udisks` (which you most likely have installed) uses /run/media for mounting removable devices.
#   This improves compatibility with most desktop environments (DEs).
# ATTENTION: The Filesystem Hierarchy Standard (FHS) recommends /media instead. Verify your system's configuration.
# - To manually mount devices, you may optionally use /mnt.
# REFERENCE: https://wiki.archlinux.org/title/Udisks#Mount_to_/media
REMOVABLE_MEDIA="/run/media"

# [ADDITIONAL FREERDP FLAGS & ARGUMENTS]
# NOTES:
# - You can try adding /network:lan to these flags in order to increase performance, however, some users have faced issues with this.
#   If this does not work or if it does not work without the flag, you can try adding /nsc and /gfx.
# DEFAULT VALUE: '/cert:tofu /sound /microphone +home-drive'
# VALID VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdown
RDP_FLAGS="/cert:tofu /sound /microphone +home-drive"

# [NON FULL WINDOWS RDP FLAGS]
# NOTES:
# - Use these flags to pass specific flags to the freerdp command when you are starting a non-full RDP session (any other command than winapps windows)
# DEFAULT_VALUES: ''
# VALID_VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdown
RDP_FLAGS_NON_WINDOWS=""

# [FULL WINDOWS RDP FLAGS]
# NOTES:
# - Use these flags to pass specific flags to the freerdp command when you are starting a full RDP session (winapps windows)
# DEFAULT_VALUES: ''
# VALID_VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdown
RDP_FLAGS_WINDOWS=""

# [DEBUG WINAPPS]
# NOTES:
# - Creates and appends to ~/.local/share/winapps/winapps.log when running WinApps.
# DEFAULT VALUE: 'true'
# VALID VALUES:
# - 'true'
# - 'false'
DEBUG="true"

# [AUTOMATICALLY PAUSE WINDOWS]
# NOTES:
# - This is currently INCOMPATIBLE with 'manual'.
# DEFAULT VALUE: 'off'
# VALID VALUES:
# - 'on'
# - 'off'
AUTOPAUSE="off"

# [AUTOMATICALLY PAUSE WINDOWS TIMEOUT]
# NOTES:
# - This setting determines the duration of inactivity to tolerate before Windows is automatically paused.
# - This setting is ignored if 'AUTOPAUSE' is set to 'off'.
# - The value must be specified in seconds (to the nearest 10 seconds e.g., '30', '40', '50', etc.).
# - For RemoteApp RDP sessions, there is a mandatory 20-second delay, so the minimum value that can be specified here is '20'.
# - Source: https://techcommunity.microsoft.com/t5/security-compliance-and-identity/terminal-services-remoteapp-8482-session-termination-logic/ba-p/246566
# DEFAULT VALUE: '300'
# VALID VALUES: >=20
AUTOPAUSE_TIME="300"

# [FREERDP COMMAND]
# NOTES:
# - WinApps will attempt to automatically detect the correct command to use for your system.
# DEFAULT VALUE: '' (BLANK)
# VALID VALUES: The command required to run FreeRDPv3 on your system (e.g., 'xfreerdp', 'xfreerdp3', etc.).
FREERDP_COMMAND=""

# [TIMEOUTS]
# NOTES:
# - These settings control various timeout durations within the WinApps setup.
# - Increasing the timeouts is only necessary if the corresponding errors occur.
# - Ensure you have followed all the Troubleshooting Tips in the error message first.

# PORT CHECK
# - The maximum time (in seconds) to wait when checking if the RDP port on Windows is open.
# - Corresponding error: "NETWORK CONFIGURATION ERROR" (exit status 13).
# DEFAULT VALUE: '5'
PORT_TIMEOUT="5"

# RDP CONNECTION TEST
# - The maximum time (in seconds) to wait when testing the initial RDP connection to Windows.
# - Corresponding error: "REMOTE DESKTOP PROTOCOL FAILURE" (exit status 14).
# DEFAULT VALUE: '30'
RDP_TIMEOUT="30"

# APPLICATION SCAN
# - The maximum time (in seconds) to wait for the script that scans for installed applications on Windows to complete.
# - Corresponding error: "APPLICATION QUERY FAILURE" (exit status 15).
# DEFAULT VALUE: '60'
APP_SCAN_TIMEOUT="60"

# WINDOWS BOOT
# - The maximum time (in seconds) to wait for the Windows VM to boot if it is not running, before attempting to launch an application.
# DEFAULT VALUE: '120'
BOOT_TIMEOUT="120"

# FREERDP RAIL HIDEF
# - This option controls the value of the `hidef` option passed to the /app parameter of the FreeRDP command.
# - Setting this option to 'off' may resolve window misalignment issues related to maximized windows.
# DEFAULT VALUE: 'on'
HIDEF="on"

Logs

[Fri 20 Feb 14:57:26 CET 2026-8517] START
[Fri 20 Feb 14:57:26 CET 2026-8517] SCRIPT_DIR: /home/xxx/.local/bin
[Fri 20 Feb 14:57:26 CET 2026-8517] SCRIPT_ARGS: EXCEL
[Fri 20 Feb 14:57:26 CET 2026-8517] HOME_DIR: /home/xxx
[Fri 20 Feb 14:57:26 CET 2026-8517] LAST_RUN: 1771595590
[Fri 20 Feb 14:57:26 CET 2026-8517] THIS_RUN: 1771595846
[Fri 20 Feb 14:57:26 CET 2026-8517] Using FreeRDP command 'xfreerdp3'.
[Fri 20 Feb 14:57:26 CET 2026-8517] UPTIME_DIFF: 0 seconds

Terms

• I am running the latest version.
• To the best of my knowledge, this is a bug and not a setup nor a FreeRDP problem.
• I have checked for duplicate issues.
• I agree to follow this project's Code of Conduct.

[kamping22]

Just to add, if I open a FreeRDP session it works as well without issues