Dependency Issues #728
Description
What happened?
/opt/winapps
❯ fastfetch
.-------------------------: sandro@infinity
.+=========================. ---------------
:++===++==================- :++- OS: CachyOS x86_64
:++====+++++=============- .==: Host: BOM-WXX9 (M1010)
-+++=====+++==========: Kernel: Linux 6.16.5-2-cachyos
=++++========------------: Uptime: 9 hours, 38 mins
=+++++=====- ... Packages: 583 (pacman)
.++++++=-===: .=+++=: Shell: fish 4.0.2
:++++=====-==: -+ Display (BOE0872): 1920x1080 in 15", 60 Hz [Bu]
:++========-=. .=++. WM: Hyprland 0.50.1 (Wayland)
.+==========-. . Theme: Fusion [Qt], oomox-wallpaper [GTK2/3/4]
:+++++++====- .--==-. Icons: Adwaita [GTK2/3/4]
:++==========. :+++++++: Font: Noto Sans (12pt) [Qt], Adwaita Sans (11p]
.-===========. =++ Cursor: default (18px)
.-===========: .++: Terminal: kitty 0.42.2
-=======++++:::::::::::::::::::::::::-: .---: Terminal Font: NotoSansMono-Regular (11pt)
:======++++====+++************=. CPU: AMD Ryzen 5 5500U (12) @ 4.06 GHz
:=====+++==========++++++++++++++- GPU: AMD Lucienne [Integrated]
.====++==============++++++++++- Memory: 5.39 GiB / 7.09 GiB (76%)
.===+==================+++++++: Swap: 199.00 MiB / 7.09 GiB (3%)
.-=======================+++: Disk (/): 21.73 GiB / 465.41 GiB (5%) - ext4
.......................... Local IP (wlp1s0): 192.168.1.203/24
Battery (HB4692Z9ECW-22T): 61% [Charging, AC C]
Locale: C.UTF-8
/opt/winapps
❯ winapps
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name is not activatable
Is there any dependency that I am missing?
I can use the Windows system with the "windows" command, but I cannot open individual apps or use the "winapps" command.
Your FreeRDP version and where you got it from
FreeRDP 3.17.1
Your Linux distribution and version
CachyOS (Arch)
Your winapps.conf
##################################
# WINAPPS CONFIGURATION FILE #
##################################
# INSTRUCTIONS
# - Leading and trailing whitespace are ignored.
# - Empty lines are ignored.
# - Lines starting with '#' are ignored.
# - All characters following a '#' are ignored.
# [WINDOWS USERNAME]
RDP_USER="sandro"
# [WINDOWS PASSWORD]
# NOTES:
# - If using FreeRDP v3.9.0 or greater, you *have* to set a password
RDP_PASS="infinity"
# [WINDOWS DOMAIN]
# DEFAULT VALUE: '' (BLANK)
RDP_DOMAIN=""
# [WINDOWS IPV4 ADDRESS]
# NOTES:
# - If using 'libvirt', 'RDP_IP' will be determined by WinApps at runtime if left unspecified.
# DEFAULT VALUE:
# - 'docker': '127.0.0.1'
# - 'podman': '127.0.0.1'
# - 'libvirt': '' (BLANK)
RDP_IP="127.0.0.1"
# [VM NAME]
# NOTES:
# - Only applicable when using 'libvirt'
# - The libvirt VM name must match so that WinApps can determine VM IP, start the VM, etc.
# DEFAULT VALUE: 'RDPWindows'
VM_NAME="RDPWindows"
# [WINAPPS BACKEND]
# DEFAULT VALUE: 'docker'
# VALID VALUES:
# - 'docker'
# - 'podman'
# - 'libvirt'
# - 'manual'
WAFLAVOR="docker"
# [DISPLAY SCALING FACTOR]
# NOTES:
# - If an unsupported value is specified, a warning will be displayed.
# - If an unsupported value is specified, WinApps will use the closest supported value.
# DEFAULT VALUE: '100'
# VALID VALUES:
# - '100'
# - '140'
# - '180'
RDP_SCALE="100"
# [MOUNTING REMOVABLE PATHS FOR FILES]
# NOTES:
# - By default, `udisks` (which you most likely have installed) uses /run/media for mounting removable devices.
# This improves compatibility with most desktop environments (DEs).
# ATTENTION: The Filesystem Hierarchy Standard (FHS) recommends /media instead. Verify your system's configuration.
# - To manually mount devices, you may optionally use /mnt.
# REFERENCE: https://wiki.archlinux.org/title/Udisks#Mount_to_/media
REMOVABLE_MEDIA="/run/media"
# [ADDITIONAL FREERDP FLAGS & ARGUMENTS]
# NOTES:
# - You can try adding /network:lan to these flags in order to increase performance, however, some users have faced issues with this.
# DEFAULT VALUE: '/cert:tofu /sound /microphone +home-drive'
# VALID VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdown
RDP_FLAGS="/cert:tofu /sound /microphone +home-drive"
# [DEBUG WINAPPS]
# NOTES:
# - Creates and appends to ~/.local/share/winapps/winapps.log when running WinApps.
# DEFAULT VALUE: 'true'
# VALID VALUES:
# - 'true'
# - 'false'
DEBUG="true"
# [AUTOMATICALLY PAUSE WINDOWS]
# NOTES:
# - This is currently INCOMPATIBLE with 'manual'.
# DEFAULT VALUE: 'off'
# VALID VALUES:
# - 'on'
# - 'off'
AUTOPAUSE="off"
# [AUTOMATICALLY PAUSE WINDOWS TIMEOUT]
# NOTES:
# - This setting determines the duration of inactivity to tolerate before Windows is automatically paused.
# - This setting is ignored if 'AUTOPAUSE' is set to 'off'.
# - The value must be specified in seconds (to the nearest 10 seconds e.g., '30', '40', '50', etc.).
# - For RemoteApp RDP sessions, there is a mandatory 20-second delay, so the minimum value that can be specified here is '20'.
# - Source: https://techcommunity.microsoft.com/t5/security-compliance-and-identity/terminal-services-remoteapp-8482-session-termination-logic/ba-p/246566
# DEFAULT VALUE: '300'
# VALID VALUES: >=20
AUTOPAUSE_TIME="300"
# [FREERDP COMMAND]
# NOTES:
# - WinApps will attempt to automatically detect the correct command to use for your system.
# DEFAULT VALUE: '' (BLANK)
# VALID VALUES: The command required to run FreeRDPv3 on your system (e.g., 'xfreerdp', 'xfreerdp3', etc.).
FREERDP_COMMAND=""
# [TIMEOUTS]
# NOTES:
# - These settings control various timeout durations within the WinApps setup.
# - Increasing the timeouts is only necessary if the corresponding errors occur.
# - Ensure you have followed all the Troubleshooting Tips in the error message first.
# PORT CHECK
# - The maximum time (in seconds) to wait when checking if the RDP port on Windows is open.
# - Corresponding error: "NETWORK CONFIGURATION ERROR" (exit status 13).
# DEFAULT VALUE: '5'
PORT_TIMEOUT="5"
# RDP CONNECTION TEST
# - The maximum time (in seconds) to wait when testing the initial RDP connection to Windows.
# - Corresponding error: "REMOTE DESKTOP PROTOCOL FAILURE" (exit status 14).
# DEFAULT VALUE: '30'
RDP_TIMEOUT="60"
# APPLICATION SCAN
# - The maximum time (in seconds) to wait for the script that scans for installed applications on Windows to complete.
# - Corresponding error: "APPLICATION QUERY FAILURE" (exit status 15).
# DEFAULT VALUE: '60'
APP_SCAN_TIMEOUT="60"
# WINDOWS BOOT
# - The maximum time (in seconds) to wait for the Windows VM to boot if it is not running, before attempting to launch an application.
# DEFAULT VALUE: '120'
BOOT_TIMEOUT="60"Logs
[Tue Sep 9 21:26:41 UTC 2025-18314] HOME_DIR: /home/sandro
[Tue Sep 9 21:26:41 UTC 2025-18314] LAST_RUN: 1757453196
[Tue Sep 9 21:26:41 UTC 2025-18314] THIS_RUN: 1757453201
[Tue Sep 9 21:26:41 UTC 2025-18314] Using FreeRDP command 'xfreerdp3'.
[Tue Sep 9 21:26:41 UTC 2025-18314] UPTIME_DIFF: 0 seconds
[Tue Sep 9 21:26:41 UTC 2025-18314] MANUAL: Downloads/Windows-ISO-Downloader.exe
[Tue Sep 9 21:26:43 UTC 2025-18314] END
[Tue Sep 9 21:27:46 UTC 2025-11913] START
[Tue Sep 9 21:27:46 UTC 2025-11913] SCRIPT_DIR: /home/sandro/.local/bin
[Tue Sep 9 21:27:46 UTC 2025-11913] SCRIPT_ARGS: manual Windows-ISO-Downloader.exe
[Tue Sep 9 21:27:46 UTC 2025-11913] HOME_DIR: /home/sandro
[Tue Sep 9 21:27:46 UTC 2025-11913] LAST_RUN: 1757453201
[Tue Sep 9 21:27:46 UTC 2025-11913] THIS_RUN: 1757453266
[Tue Sep 9 21:27:46 UTC 2025-11913] Using FreeRDP command 'xfreerdp3'.
[Tue Sep 9 21:27:46 UTC 2025-11913] UPTIME_DIFF: 0 seconds
[Tue Sep 9 21:27:46 UTC 2025-11913] MANUAL: Windows-ISO-Downloader.exe
[Tue Sep 9 21:27:47 UTC 2025-11913] ENDTerms
- I am running the latest version.
- To the best of my knowledge, this is a bug and not a setup nor a FreeRDP problem.
- I have checked for duplicate issues.
- I agree to follow this project's Code of Conduct.