Reboot with the new OS7.50 from the Fritzbox 7590

[PatricckW]

What happened?

The WLED restarted after 59 seconds, since the new software 7.50 is on the Fritzbox and it was rebooted once.
I have see this bug still on the Beta Versions from the Router, with the old OS7.29 I have no problems.

To Reproduce Bug

Install the Version 7.50 and reboot the WLED, than it will restart after 59 Sec

Expected Behavior

No reboots

Install Method

Binary from WLED.me

What version of WLED?

WLED 0.13.3 (build 2208222)

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[softhack007]

Actually WLED does not know what kind of router it is connecting to, as we use the standard Wifi driver from espressif.

To better understand what happens, we first need to see if you get error messages on serial interface. Please connect your device to a Computer (using USB serial), and tell us what kind of messages you get on serial monitor when the restart happens (you can use Arduino IDE serial monitor for this).

[PatricckW]

That is very difficult vor me, it is from Cod.m without USB interface, only Wifi.
I use a Fritzbox 7590 from AVM, one of the most used Routers for Privat in Germany

[softhack007]

Just to check if the current version works better,

please install WLED 0.14 (beta 0) from one of these sites:

• https://wled-install.github.io
• or from https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/WLED_wemos_shield/v0.14.0-b0

[PatricckW]

I try version 14 but it is the same Problem

[softhack007]

ok, then best to try another ESP32.

[PatricckW]

I wait for a new one yes.
I geht the problem as I try the beta Version from AVM for the Router, wenn I go back to the Release all work fine, no restarts

[PatricckW]

I try it today with an Devolo Repeater, which I have converted as an access point with own WLAN SSID
No it work fine, no Reboots yet

[SmartHomeExpert]

@PatricckW: Had the same reboots after updating to fritzos 7.50.
The only quick solution was to change the WLED WiFi Access Point Setup. Set „AP opens“ to „never“.

Seems like WLED needs some WiFi information which the new fritzos doesn’t brodcast anymore…

[PatricckW]

Thank you, but "to never" means the AP will not appear again?

[derpate1989]

Hey. I have FritzOS 7.50 and 3 Wled ESP32 with no reboot problem and i dont know why, but it works Perfect.

Same with the new 0.14 Beta Update, it works Perfect with FritzOS 7.50

[Lollo79]

@PatricckW: Have the same reboots after updating to fritzos 7.50.

Bought this as a replacement and have the same problem. Is the AP Setting to "Never" can be reset with a factory reset?

[PatricckW]

I try a other Controller today, same problem (I use it with mesh)
It happen if you reboot it on the first time

[Lollo79]

Ich hab das Problem mal AVM geschildert vielleicht haben die noch eine Idee.

[PatricckW]

Ich hab das Problem mal AVM geschildert vielleicht haben die noch eine Idee.

I try that as OS7.50 was on Beta State, but it don´t help much