Integration keeps disappearing after HA reboot

[arikatame]

Hello, first of all this integration works perfectly fine with my porta split AC as long it is set up.

I only have a small issue that is annoying after rebooting Home assistant. That is, every time after a reboot I need to set up the integration again. It only takes a minute but still is annoying. and it only works when the device is powered on. That's not a big issue, but annoying when I want to tinker with automations and first need to set up the integration again.

I'm not sure on how to diagnose this and what logs could be helpful to check.
Anyone got similar issues or any Idea on how I can look into this issue to resolve this ?

All other integrations I have install work fine and don't disappear after a reboot.
Any help is appreciated .:)

[pvog67]

I have the same problem.

[arikatame]

Good luck, in my case it turned out to be an issue with some custom integration that broke my HA installation.
Check if it only is this integration or if other integrations are affected as well.
If so you might have an strange storage error in your Logs.
When that is or maybe isn't the case, you might have the same Issue as myself.
I tried setting up a new installation and recover a fresh backup. But the issue was there again after restore of the backup.

In the end I throw everything in the garbage and set up everything from scratch.

[pvog67]

I will try it, thank you.

[pvog67]

That was my fault too. I fixed it from scratch and now it's OK. Thank you.