Add support for Smoke_M sensor type

[SoulGit]

Before submitting this form

• I have checked that this sensor type was not suggested for addition before; I know that it could
  be in open or closed issues, and if there was another issue mentioning this sensor type I could
  simply comment in it instead

• I have updated the <sensor type> mention in the title of the issue, but left the issue title
  as it was otherwise

• I understand that if I want to suggest the addition of more than a single sensor type, I need
  to file that form for each separate type

Sensor type

Smoke_M

Home Assistant device class

smoke

Does the panel send sensor status updates?

• Yes, I can see the Open/Close messages (I have been able to capture ZONE_ACTIVE messages)
• No, it seems to only tell us the sensor exists, but never update its state

Sensor data from an INFO message

WARNING qolsys_panel: sensor of unknown type: {'id': '9E51AC', 'type': 'Smoke_M', 'name': 'Bedroom Audio Smoke Detector', 'group': 'smoke_heat', 'status': 'Closed', 'state': '0', 'zone_id': 31, 'zone_physical_type': 1, 'zone_alarm_type': 9, 'zone_type': 111, 'partition_id': 0}

Sensor data from a ZONE_EVENT's ZONE_UPDATE message

N/A

Sensor data from a ZONE_EVENT's ZONE_ACTIVE message

N/A

Additional context

Thanks! Please advise if you do need additional data - I would need to activate the smoke alarms to trigger this sensor so the event needs to be planned with an empty house and the panel in test mode.

[robertendicott]

I have the same request. I thought the Smoke Detector was working and I realized today that I have the same messages as above. This would be greatly apprciated as I'm dead in the water without this working if there is a fire.