DoorPhoneBell.ino

#include <avr/sleep.h>
#include "pitches.h"

/* Sleep Demo Serial
 * -----------------
 * Example code to demonstrate the sleep functions in an Arduino.
 *
 * use a resistor between RX and pin2. By default RX is pulled up to 5V
 * therefore, we can use a sequence of Serial data forcing RX to 0, what
 * will make pin2 go LOW activating INT0 external interrupt, bringing
 * the MCU back to life
 *
 * there is also a time counter that will put the MCU to sleep after 10 secs
 *
 * NOTE: when coming back from POWER-DOWN mode, it takes a bit
 *       until the system is functional at 100%!! (typically <1sec)
 *
 * Copyright (C) 2006 MacSimski 2006-12-30 
 * Copyright (C) 2007 D. Cuartielles 2007-07-08 - Mexico DF
 * 
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * 
 */

int wakePin = 2;                 // pin used for waking up
int sleepStatus = 0;             // variable to store a request for sleep
int count = 0;                   // counter

// notes in the melody:
int melody[] = {
  NOTE_C4, NOTE_G3,NOTE_G3, NOTE_A3, NOTE_G3,0, NOTE_B3, NOTE_B3_PLUS};

// note durations: 4 = quarter note, 8 = eighth note, etc.:
int noteDurations[] = {
  4, 8, 8, 4,4,4,4,2 };

void wakeUpNow()        // here the interrupt is handled after wakeup
{
  // execute code here after wake-up before returning to the loop() function
  // timers and code using timers (serial.print and more...) will not work here.
  // we don't really need to execute any special functions here, since we
  // just want the thing to wake up
}

void setup()
{
  pinMode(wakePin, INPUT);
  pinMode(12, INPUT);
  digitalWrite(12, HIGH); 
  attachInterrupt(1, wakeUpNow, HIGH); // use interrupt 0 (pin 2) and run function
                                      // wakeUpNow when pin 2 gets LOW 
}

void sleepNow()         // here we put the arduino to sleep
{

    set_sleep_mode(SLEEP_MODE_PWR_DOWN);   // sleep mode is set here

    sleep_enable();          // enables the sleep bit in the mcucr register
                             // so sleep is possible. just a safety pin 

    attachInterrupt(0,wakeUpNow, HIGH); // use interrupt 0 (pin 2) and run function
                                       // wakeUpNow when pin 2 gets LOW 

    sleep_mode();            // here the device is actually put to sleep!!
                             // THE PROGRAM CONTINUES FROM HERE AFTER WAKING UP

    sleep_disable();         // first thing after waking from sleep:
                             // disable sleep...
    detachInterrupt(0);      // disables interrupt 0 on pin 2 so the 
                             // wakeUpNow code will not be executed 
                             // during normal running time.

}

void loop()
{
  playTone();
  sleepNow();     // sleep function called here
}


void playTone() {
  // iterate over the notes of the melody:
  melody[7] = random(130, 430);
  for (int thisNote = 0; thisNote < 8; thisNote++) {
    // to calculate the note duration, take one second 
    // divided by the note type.
    //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
    int noteDuration = 1000/noteDurations[thisNote];
    tone(8, melody[thisNote],noteDuration);
    
    // Breaking off if the phone is off hook
    /*if(digitalRead(12)) {
      delay(5000);
      break;
    }*/
    
    // to distinguish the notes, set a minimum time between them.
    // the note's duration + 30% seems to work well:
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    // stop the tone playing:
    noTone(8);
  }
  delay(3000);
}