Neopixel - 3d

This project aims to add 3d cube support on top of the microsoft neopixel extension

On top of the original extension, two functions are added:

setCubeWidth: allows user to initialize the cube

setCubeColor: allows user to set color in the cube with xyz coordinates.

For future development, you may refer to the original project of microsoft. Lots of functions are deleted due to the need of weight losing of the extension

Below is the original readme file from microsoft

NeoPixel driver

This library provides a driver for various Neo Pixel LED strips, see https://www.adafruit.com/category/168.

NeoPixels consist of programmable RGB LEDs (WS2812B), every one of them controlled separately.

~ hint

See Microsoft/pxt-ws2812b for basic WS2812B led support.

~

Basic usage

// Create a NeoPixel driver - specify the pin, number of LEDs, and the type of 
// the NeoPixel srip, either standard RGB (with GRB or RGB format) or RGB+White.
let strip = neopixel.create(DigitalPin.P0, 24, NeoPixelMode.RGB);

// set pixel colors
strip.setPixelColor(0, NeoPixelColors.White); // white
strip.setPixelColor(1, 0xff0000);     // red
strip.setPixelColor(2, 0x00ff00);     // green
strip.setPixelColor(3, NeoPixelColors.Blue);    // blue

// send the data to the strip
strip.show()

Use ||setBrightness|| to lower the brightness (it's maxed out by default).

Use ||shift|| or ||rotate|| to shift the lights around.

Use ||setPixelWhiteLED|| to set brightness of the white pixel for RGB+W strips.

HSL color format

Use neopixel.hslToRgb() to create colors using hue, saturation, and lightness.

Example: Using accelerometer to control colors

This little program will let the position of the microbit control the color of the first LED. This first LED will then get shifted further away every 100ms.

let strip = neopixel.create(DigitalPin.P0, 24, NeoPixelMode.RGB_RGB)
while (true) {
    let x = input.acceleration(Dimension.X) / 2;
    let y = input.acceleration(Dimension.Y) / 2;
    let z = input.acceleration(Dimension.Z) / 2;
    strip.shift(1);
    strip.setPixelColor(0, neopixel.rgb(x, y, -z));
    strip.show();
    basic.pause(100);
}

Supported targets

• for PXT/microbit
• for PXT/calliope

License

MIT

Code of Conduct

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact opencode@microsoft.com with any additional questions or comments.