Releases: Ericsson/codechecker
v6.25.1
6.25.0
🌟 Highlights
Guideline Statistics page under the statistics tab to generate SEI Cert and CWE Top 25 Compliance reports
A new Guideline Statistics page is added under the statistics tab to generate SEI Cert Compliance reports.
This page shows the compliance of an analyzed program to a coding guideline (such as SEI Cert C/C++) . It shows all checkers corresponding to a guideline rule, their configuration status (on/off) and all outstanding and closed reports per guideline rule.
It is possible to generate the table into HTML and CSV format.
The first supported guidelines are SEI Cert C and C++ and CWE Top 25
Facebook Infer as a new C/C++ analyzer plugin
Besides clang-tidy, clang static analyzer, cppcheck and gcc, Facebook Infer is a well known open-source static code analyzer tool https://github.com/facebook/infer
CodeChecker will support executing this analyzer. It will not be enabled by default, but is available for testing.
PVS Studio report conversion
From now on, it will be possible to convert the reports of the https://pvs-studio.com/en/pvs-studio/ analyzer and handle them with CodeChecker.
PVS-Studio Static Code Analyzer support by @feeelin in #4356
❗ Backward incompatible changes
- Resolve checker enable/disable ambiguity by @noraz31 in #4377 and by @cservakt in #4392
CodeChecker analyze emits an error (instead of a warning) when the enabled checkers/profiles/checker prefix groups are given ambiguously. In these cases the ambiguity must be resolved. For exampleCodeChecker analyze -e security
command is ambiguous assecurity
is a checker group (all checkers starting withsecurity.
and a profile at the same time. Please define explicitlyCodeChecker -e prefix:security
if you mean the prefix group, orprofile:security
if you mean the security profile.
CodeChecker -e clang-diagnostic-format
will give an error, because it is ambiguous if the user means the clang-diagnostic-format
single checker, or all checkers starting with clang-diagnostic-format
. To refer the former, the user must user checker:clang-diagnostic-format
or to the latter prefix:clang-diagnostic-format
.
If you have such clashing cases, you must resolve them. The following namespaces can be used
prefix:
- to mach checkers starting with a prefix
profile:
- to match a checker profile
checker:
- to match a single checker
guideline:
- to match checkers belonging to a guideline
severity:
- to match checkers belonging to a given severity.
-
The skip file handling changed! Adding a --drop-reports-from-skipped-files parameter to analyze by @dkrupp in #4332
After this patch, the skip files will only skip the analysis of the listed files, but will not filter out any reports. This may result in more reports than before.
By default CodeChecker used to filter out all reports from files which were on the skip list. This can hide true positive reports starting from unskipped code and ending in skipped files (typical with CTU and header related findings).
This patch removes the default report filtering post processing step from CodeChecker analyze --skip SKIPFILE operation.
The legacy functionality is still available with the --drop-reports-from-skipped-files parameter. -
guideline:sei-cert
cannot be used anymore. The sei-cert guideline profile was split toguideline:sei-cert-c
for the C guideline andguideline:sei-cert-cpp
for the C++ guideline. #4400 -
CodeChecker -e W*
syntax is not supported anymore. Clang warnings only appear asclang-diagnostic-*
checkers and they can be enabled using the standard checker checker on/off mechanism e.g.CodeChecker analyze -e clang-diagnostic-unused-function
-
The
--saargs
,--tidyargs
and--cppcheckargs
flags are now deprecated. The corresponding analyzer configuration option should be used instead, e.g.--analyzer-config clangsa:cc-verbatim-args-file=<filename>
. The old flags are still working, but will be converted to the new form under the hood.
🐛 Analyzer improvements
- [fix] Resolve checker enable/disable ambiguity #4392
- [fix] Don't capture cc1 by the logger. by @bruntib in #4300
- Add -mmitigate-rop to ignored options by @noraz31 in #4295
- Removing alpha checkers from the security profile so it can be used in production by @dkrupp in #4284
- [analyzer] Adds -fno-freestanding to ignored GCC compiler flags by @ArchieAtkinson in #4281
- [analyzer] Disable clang-diagnostic-error checker by @cservakt in #4325
- [analyzer] Ignore
-fno-printf-return-value
by @pdgendt in #4329 - [anayzer] Fb infer by @stt08 in #4257
- [feat] Introduce cc-verbatim-args-file @bruntib #4456
💻 CLI/Server improvements
- Fix trim-path-prefix functionality in HTML export by @dkrupp #4387
- Automatic addition of database before connecting to it by @feyruzb #4316
- Resolve paths when blaming files by @tomhughes #4357
- Fix the endpoint parsing issue by @dkrupp in 8953b30
- Removing the root user creation by @dkrupp in 3bb2cbf
- [feat] Adding report annotation for json export by @cservakt in #4380
- [fix] Get product configuration with view permission by @bruntib in #4375
- CodeChecker authentication fixed by @dkrupp in #4369
- [fix] Forwarding --ctu-ast-mode to analyze command by @bruntib in #4341
- [fix] Better SQL SELECT instead of a timeout query by @bruntib in #4363
- Speeding up store by removing nested query by @dkrupp in #4358
- Environment initialization for binaries by @dkrupp in #4337
- [fix] Missing analyzer error by @cservakt in #4330
- [fix] Don't reset PATH in Cppcheck plugin by @bruntib in #4320
- [feat] Implicit include paths added with -idirafter by @bruntib in #4315
- Revert "[analyzer] Use absolute path to logger.so in LD_PRELOAD" by @dkrupp in #4314
- [cmd] Checker name prefixes are meant along separator characters by @bruntib in #4311
- [fix] Support joker characters at annotation filter by @bruntib in #4306
- Analyzer binary dependent environment by @dkrupp in #4305
- [fix] Minor fixing for statistics tabs by @cservakt in #4304
- [fix] Don't enable checkers by suffix by @bruntib in #4307
- [Fix] Report sorting in unique mode by @cservakt in #4294
- [fix] Error when debug logging skipped actions by @bruntib in #4301
🌳 Environment
- PVS-Studio Static Code Analyzer support by @feeelin in #4356
- Bump webpack from 5.91.0 to 5.94.0 in /web/server/vue-cli by @dependabot in #4334
- [cfg] Add setuptools as a dependency by @bruntib in #4285
- Deprecate distutils by @EinarArnason in #4286
- Bump urllib3 from 2.2.1 to 2.2.2 in /scripts/labels/label_tool by @dependabot in #4290
- [cfg] Upgrade to pylint 3.2.4 by @bruntib in #4279
- [cfg] Upgrade lxml version by @bruntib in #4262
- Bump follow-redirects from 1.15.4 to 1.15.6 in /web/server/vue-cli by @dependabot in #4192
📖 Documentation updates
- Modified documentation to match current procedures for changing schema by @feyruzb in #4366
- chore: Remove ancient, unused
docs/checker_docs.md
by @whisperity in #4283 - additional library was required for venv_dev by @stt08 in #4273
🔨 Other
- [cfg] Add info for new unix.Chroot Checker by @vabridgers #4391
- Add test for Disable clang-diagnostic-error checker #4325 by @noraz31 in #4339
- Github Actions: stop previous jobs when a new one was pushed by @stt08 in #4351
- Bring code borrowed from
http.server
in sync with upstream by @Discookie in #4379 - [test] Fix test with new clang version by @bruntib in #4382
- [cmd] Display warning instead of debug log for missing diagtool by @bruntib in https://github.com/Ericsson/code...
v6.24.7
- The CodeChecker server in the codechecker-web docker image could not connect to LDAP servers for authentication using SSL and the authentication was not working. This was fixed.
Full Changelog: v6.24.6...v6.24.7
v6.24.6
- Update the Python version in the codechecker-web Docker image
- Fix an URL parsing error in the web server
Full Changelog: v6.24.5...v6.24.6
v6.24.5
v6.25.0-rc1
🌟 Highlights
Guideline Statistics page under the statistics tab to generate SEI Cert Compliance reports
A new Guideline Statistics page is added under the statistics tab to generate SEI Cert Compliance reports.
This page shows the compliance of an analyzed program to a coding guideline (such as SEI Cert C/C++) . It shows all checkers corresponding to a guideline rule, their configuration status (on/off) and all outstanding and closed reports per guideline rule.
It is possible to generate the table into HTML and CSV format.
The first supported guidelines are SEI Cert C and C++.
Facebook Infer as a new C/C++ analyzer plugin
Besides clang-tidy, clang static analyzer, cppcheck and gcc, Facebook Infer is a well known open-source static code analyzer tool https://github.com/facebook/infer
CodeChecker will support executing this analyzer. It will not be enabled by default, but is available for testing.
PVS Studio report conversion
From now on, it will be possible to convert the reports of the https://pvs-studio.com/en/pvs-studio/ analyzer and handle them with CodeChecker.
PVS-Studio Static Code Analyzer support by @feeelin in #4356
❗ Backward incompatible changes
- Resolve checker enable/disable ambiguity by @noraz31 in #4377 and by @cservakt in #4392
CodeChecker analyze emits an error (instead of a warning) when the enabled checkers/profiles/checker prefix groups are given ambigously. In these cases the ambiguity must be resolved. For exampleCodeChecker analyze -e security
command is ambigous assecurity
is a checker group (all checkers starting withsecurity.
and a profile at the same time. Please define explicitlyCodeChecker -e prefix:security
if you mean the prefix group, orprofile:security
if you mean the security profile.
CodeChecker -e clang-diagnostic-format
will give an error, because it is ambigous if the user means the clang-diagnostic-format
single checker, or all chekcers starting with clang-diagnostic-format
. To refer the former, the user must user checker:clang-diagnostic-format
or to the latter prefix:clang-diagnostic-format
.
If you have such clashing cases, you must resolve them. The following namespaces can be used
prefix:
- to mach checkera starting with a prefix
profile:
- to match a checker profile
checker:
- to match a single checker
guideline:
- to match checkers belonging to a guideline
severity:
- to match checkers belonging to a given severity.
-
The skip file handling changed! Adding a --drop-reports-from-skipped-files parameter to analyze by @dkrupp in #4332
After this patch, the skip files will only skip the analysis of the listed files, but will not filter out any reports. This may result in more reports than before.
By default CodeChecker used to filter out all reports from files which were on the skip list. This can hide true positive reports strating from unskipped code and ending in skipped files (typical with CTU and header related findings).
This patch removes the default report filtering post processing step from CodeChecker analyze --skip SKIPFILE operation.
The legacy functionality is still available with the --drop-reports-from-skipped-files paramer. -
guideline:sei-cert
cannot be used anymore. The sei-cert guideline profile was split toguideline:sei-cert-c
for the C guideline andguideline:sei-cert-cpp
for the C++ guideline. #4400 -
CodeChecker -e W*
syntax is not supported anymore. Clang warnings only appear asclang-diagnostic-*
checkers and the
🐛 Analyzer improvements
- [fix] Resolve checker enable/disable ambiguity #4392
- [fix] Don't capture cc1 by the logger. by @bruntib in #4300
- Add -mmitigate-rop to ignored options by @noraz31 in #4295
- Removing alpha checkers from the security profile so it can be used in production by @dkrupp in #4284
- [analyzer] Adds -fno-freestanding to ignored GCC compiler flags by @ArchieAtkinson in #4281
- [analyzer] Disable clang-diagnostic-error checker by @cservakt in #4325
- [analyzer] Ignore
-fno-printf-return-value
by @pdgendt in #4329 - [anayzer] Fb infer by @stt08 in #4257
💻 CLI/Server improvements
- Fix trim-path-prefix functionality in HTML export by @dkrupp #4387
- Automatic addition of database before connecting to it by @feyruzb #4316
- Resolve paths when blaming files by @tomhughes #4357
- Fix the endpoint parsing issue by @dkrupp in 8953b30
- Removing the root user creation by @dkrupp in 3bb2cbf
- [feat] Adding report annotation for json export by @cservakt in #4380
- [fix] Get product configuration with view permission by @bruntib in #4375
- CodeChecker authentication fixed by @dkrupp in #4369
- [fix] Forwarding --ctu-ast-mode to analyze command by @bruntib in #4341
- [fix] Better SQL SELECT instead of a timeout query by @bruntib in #4363
- Speeding up store by removing nested query by @dkrupp in #4358
- Environment initialization for binaries by @dkrupp in #4337
- [fix] Missing analyzer error by @cservakt in #4330
- [fix] Don't reset PATH in Cppcheck plugin by @bruntib in #4320
- [feat] Implicit include paths added with -idirafter by @bruntib in #4315
- Revert "[analyzer] Use absolute path to logger.so in LD_PRELOAD" by @dkrupp in #4314
- [cmd] Checker name prefixes are meant along separator characters by @bruntib in #4311
- [fix] Support joker characters at annotation filter by @bruntib in #4306
- Analyzer binary dependent environment by @dkrupp in #4305
- [fix] Minor fixing for statistics tabs by @cservakt in #4304
- [fix] Don't enable checkers by suffix by @bruntib in #4307
- [Fix] Report sorting in unique mode by @cservakt in #4294
- [fix] Error when debug logging skipped actions by @bruntib in #4301
🌳 Environment
- PVS-Studio Static Code Analyzer support by @feeelin in #4356
- Bump webpack from 5.91.0 to 5.94.0 in /web/server/vue-cli by @dependabot in #4334
- [cfg] Add setuptools as a dependency by @bruntib in #4285
- Deprecate distutils by @EinarArnason in #4286
- Bump urllib3 from 2.2.1 to 2.2.2 in /scripts/labels/label_tool by @dependabot in #4290
- [cfg] Upgrade to pylint 3.2.4 by @bruntib in #4279
- [cfg] Upgrade lxml version by @bruntib in #4262
- Bump follow-redirects from 1.15.4 to 1.15.6 in /web/server/vue-cli by @dependabot in #4192
📖 Documentation updates
- Modified documentation to match current procedures for changing schema by @feyruzb in #4366
- chore: Remove ancient, unused
docs/checker_docs.md
by @whisperity in #4283 - additional library was required for venv_dev by @stt08 in #4273
🔨 Other
- [cfg] Add info for new unix.Chroot Checker by @vabridgers #4391
- Add test for Disable clang-diagnostic-error checker #4325 by @noraz31 in #4339
- Github Actions: stop previous jobs when a new one was pushed by @stt08 in #4351
- Bring code borrowed from
http.server
in sync with upstream by @Discookie in #4379 - [test] Fix test with new clang version by @bruntib in #4382
- [cmd] Display warning instead of debug log for missing diagtool by @bruntib in #4342
- [test] The assertDictContainsSubset() is depreceted and removed by @bruntib in #4322
- [fix] fix compare_results.py sciprt by @bruntib in #4319
- [script] Script for querying all reports by @bruntib in #4245
- chore(config): Apply invariant fixes from
label-tool
by @whisperity in #4291 - [cfg] Upgrade pycodestyle to 2.12.0 by @bruntib in https://github.com/Ericsson/c...
v6.24.4
v6.24.3
v6.24.2
This release contains security vulerability fixes.
It is highly recommended to upgrade to this as soon as possible.
-
[fix] Removing the root user creation 3bb2cbf
Backward incompatible change: The built-in root user generated at CodeChecker server start with
CodeChecker --reset-root ...
has been disabled.
Instead, the user can giveSUPER_USER
permission to an existing user in theserver_config.json
For further details, see https://github.com/Ericsson/codechecker/blob/master/docs/web/user_guide.md#initial-super-user -
Fix the endpoint parsing issue 8953b30
CodeChecker web server has accepted some invalid URLs. The URL parsing has been hardened.
v6.24.1
🌟 Highlights
Standard library handling change
GCC has implicit include paths that are forwarded to Clang. Until now these paths were added with -isystem
flag, but sometimes the priority of this is too high: https://gcc.gnu.org/onlinedocs/gcc/Directory-Options.html The implicit include paths should be searched the last, so -isystem
has been changed to -idirafter
.
In case of potential backward compatibility break --add-gcc-include-dirs-with-isystem
has been introduced for "CodeChecker analyze" command which reverts this change.
ld_logger
environment change
CodeChecker log
command uses the LD_PRELOAD
environment variable for collecting the build commands. This environment variable relies on LD_LIBRARY_PATH
which tells where to find the .so
file set in LD_PRELOAD
. Some build systems overwrite the value of LD_LIBRARY_PATH
and for this reason CodeChecker fails to collect build commands. A solution to this problem was to fill LD_PRELOAD
with an absolute path. However, this solution doesn't work when the analyzed project is built for multiple target architectures (e.g 32 and 64 bits), since CodeChecker sets a single absolute path based on the host architecture.
If the project's build system is resetting LD_LIBRARY_PATH
, then the workaround solution is to extend LD_LIBRARY_PATH
with the proper ldlogger.so
file: For further details consult this documentation.
Enable checkers by group prefix
Checkers can be enabled by providing a group prefix. For example, cplusplus.NewDeleteLeaks
can be enabled by --enable cplusplus
. The problem was that checkers are enabled by any name prefix, so this former checker is also enabled by cplusplus.NewDelete
which is not an intended behavior. This release fixes this issue.
Also, it was possible to enable checkers by suffix (e.g. --enable NewDeleteLeaks
). As of this release, the suffix matching is not checked either.
💻 CLI/Server improvements
- [fix] Don't reset PATH in Cppcheck plugin #4320
- [feat] Implicit include paths added with -idirafter #4315
- Revert "[analyzer] Use absolute path to logger.so in LD_PRELOAD" #4314
- [cmd] Checker name prefixes are meant along separator characters #4311
- Analyzer binary dependent environment #4305
- [fix] Support joker characters at annotation filter #4306
- [Fix] Report sorting in unique mode #4294
- [fix] Don't enable checkers by suffix #4307
- [fix] Minor fixing for statistics tabs #4304
- [fix] Error when debug logging skipped actions #4301
- [fix] Don't capture cc1 by the logger. #4300
- Add -mmitigate-rop to ignored options #4295
- [analyzer] Ignore -fno-printf-return-value #4329
- [fix] Disable clang-diagnostic-error checker #4325
- [fix] Missing analyzer error #4330
- [fix] Forwarding --ctu-ast-mode to analyze command #4341
- Environment initialization for binaries #4337
🌳 Environment
- [cfg] Add setuptools as a dependency #4285
- Deprecate distutils #4286
- Bump urllib3 from 2.2.1 to 2.2.2 in /scripts/labels/label_tool #4290
- [cfg] Upgrade to pylint 3.2.4 #4279
- [analyzer] Adds -fno-freestanding to ignored GCC compiler flags #4281
- [cfg] Upgrade pycodestyle to 2.12.0 #4264
- [cfg] Upgrade lxml version #4262