Creating New Disk

What you need:

• Atari Computer (If you have an Atari 400 or 800, the BASIC cartridge as well.)
• #FujiNet
• micro SD card in slot
• completed Testing Local SD Card Storage

Steps:

1. Power on Fujinet
2. Power on Atari
3. Boot into CONFIG
4. Select SD
5. Select Atari DOS folder.
6. Select Atari DOS 2.0s.atr
7. Mount to Device Slot 1 (D1)
8. Mount as R/O. DEVICES/SLOTS should re-appear.
9. Press D to select device slots.
10. Use arrow keys to select device slot 2
11. Press N.
12. For the name, enter test.atr
13. For Host Slot, press 1 (which is currently defined as SD)
14. For disk type, press 1 for 90K (single density).
15. Are you sure? Y
16. Ensure that test.atr is now visible in device slot 2. It is mounted READ/WRITE.
17. Press OPTION to boot. If using XL/XE system, keep option held down until DOS appears.
18. Let DOS boot.
19. At DOS menu, press I, followed by RETURN
20. DRIVE TO FORMAT? 2 RETURN
21. for, Y TO FORMAT DISK 2, press Y RETURN
22. Wait for SELECT ITEM. No ERROR should appear.
23. PRESS A RETURN
24. FILE SPEC? RETURN
25. Ensure 707 FREE SECTORS
26. Press H RETURN
27. DRIVE TO WRITE DOS FILES TO? 2 RETURN Wait for operation to complete. No error should occur.
28. PRESS A RETURN
29. FILE SPEC? RETURN
30. Ensure 626 FREE SECTORS, DOS.SYS 037, DUP.SYS 042
31. To quickly test the result, Press the Drive Swap button (left-most button of the two buttons on left)
32. Ensure Blue LED flashes momentarily, indicating disk swap.
33. Press M RETURN
34. RUN AT ADDRESS? E477 RETURN .. the system should cold start.
35. If running in XL/XE you will probably see BASIC after boot, type DOS to get to DOS.
36. DOS menu should appear.
37. Test done, power off.

Expected Result:

• New 90K disk called TEST.ATR on local storage, containing Atari DOS 2.0S, that boots.