SIO Commands for Device ID $70

The following table shows the currently proposed SIO commands for Device $70 - The FujiNet Device itself.

Command	Description
$B0	DIAGNOSTIC: Alter SIO Timing for T0
$B1	DIAGNOSTIC: Alter SIO Timing for T1
$B2	DIAGNOSTIC: Alter SIO Timing for T2
$B3	DIAGNOSTIC: Alter SIO Timing for T3
$B4	DIAGNOSTIC: Alter SIO Timing for T4
$B5	DIAGNOSTIC: Alter SIO Timing for T5
$C9	Base64 Decode Output
$CA	Base64 Decode Length
$CB	Base64 Decode Compute
$CC	Base64 Decode Input
$CD	Base64 Encode Output
$CE	Base64 Encode Length
$CF	Base64 Encode Compute
$D0	Base64 Encode Input
$D6	Set Boot Mode
$D7	Mount All
$D8	Copy File
$D9	Enable/Disable CONFIG in D1:
$DA	Get Device Slot Filename
$DB	Close App Key
$DC	Open App Key
$DD	Read App Key
$DE	Write App Key
$DF	Set External SIO Clock
$E0	Get Host Prefix
$E1	Set Host Prefix
$E2	Set Filename for Device Slot
$E3	Set HSIO Index
$E4	Set Directory Position
$E5	Get Directory Position
$E6	Unmount Host
$E7	New Disk
$E8	Get Adapter Config
$E9	Unmount Device Image
$F0	Enable UDPStream mode
$F1	Write Device Slots
$F2	Read Device Slots
$F3	Write Host Slots
$F4	Read Host Slots
$F5	Close Directory
$F6	Read Directory
$F7	Open Directory
$F8	Mount Device Image
$F9	Mount Host
$FA	Get WiFi Status
$FB	Set SSID and Connect
$FC	Get Scan Result
$FD	Scan Networks
$FE	Get SSID
$FF	Reset FujiNet

This list is very much in progress and is subject to change.