Empty application template

This is a minimal starter application template for Infineon CYW55xxx embedded devices.

View this README on GitHub.

Provide feedback on this code example.

Requirements

• ModusToolbox™ v3.2 or later (tested with v3.2)
• Board support package (BSP) minimum required version: 1.0.0
• Programming language: C
• Associated parts: CYW955913EVK-01 CYW955513EVK-01 KIT-CYW55310-EVAL

Supported toolchains (make variable 'TOOLCHAIN')

• GNU Arm® Embedded Compiler v11.3.1 (GCC_ARM) – Default value of TOOLCHAIN
• Arm® Compiler v6.16 (ARM)

Supported kits (make variable 'TARGET')

• CYW955913EVK-01 Wi-Fi Bluetooth® Prototyping Kit (CYW955913EVK-01)
• CYW955513EVK-01 Wi-Fi Bluetooth® Prototyping Kit (CYW955513EVK-01)
• KIT-CYW55310-EVAL Bluetooth® Prototyping Kit (KIT-CYW55310-EVAL)

Hardware setup

This example uses the kit’s default configuration. See the respective kit guide to ensure that the kit is configured correctly.

Note: The CYW955513EVK-01 Wi-Fi Bluetooth® prototyping kit ships with KitProg3 version 2.30 installed. The ModusToolbox™ software requires KitProg3 with latest version 2.50. Before using this code example, make sure that the board is upgraded to KitProg3 2.50. The tool and instructions are available in the Firmware Loader GitHub repository. If you do not upgrade, you will see an error such as "unable to find CMSIS-DAP device" or "KitProg firmware is out of date".

Using the code example

Create the project

The ModusToolbox™ tools package provides the Project Creator as both a GUI tool and a command line tool.

Use Project Creator GUI

1. Open the Project Creator GUI tool.

   There are several ways to do this, including launching it from the dashboard or from inside the Eclipse IDE. For more details, see the Project Creator user guide (locally available at {ModusToolbox™ install directory}/tools_{version}/project-creator/docs/project-creator.pdf).

2. On the Choose Board Support Package (BSP) page, select a kit supported by this code example. See Supported kits.

   Note: To use this code example for a kit not listed here, you may need to update the source files. If the kit does not have the required resources, the application may not work.

3. On the Select Application page:

   a. Select the Applications(s) Root Path and the Target IDE.

   Note: Depending on how you open the Project Creator tool, these fields may be pre-selected for you.

   b. Select this code example from the list by enabling its check box.

   Note: You can narrow the list of displayed examples by typing in the filter box.

   c. (Optional) Change the suggested New Application Name and New BSP Name.

   d. Click Create to complete the application creation process.

Use Project Creator CLI

The 'project-creator-cli' tool can be used to create applications from a CLI terminal or from within batch files or shell scripts. This tool is available in the {ModusToolbox™ install directory}/tools_{version}/project-creator/ directory.

Use a CLI terminal to invoke the 'project-creator-cli' tool. On Windows, use the command-line 'modus-shell' program provided in the ModusToolbox™ installation instead of a standard Windows command-line application. This shell provides access to all ModusToolbox™ tools. You can access it by typing "modus-shell" in the search box in the Windows menu. In Linux and macOS, you can use any terminal application.

The following example clones the "Empty App" application with the desired name "MyEmptyApp" configured for the CYW955913EVK-01 BSP into the specified working directory, C:/mtb_projects:

project-creator-cli --board-id CYW955913EVK-01 --app-id mtb-example-threadx-empty-app --user-app-name MyEmptyApp --target-dir "C:/mtb_projects"

The 'project-creator-cli' tool has the following arguments:

Argument	Description	Required/optional
--board-id	Defined in the field of the BSP manifest	Required
--app-id	Defined in the field of the CE manifest	Required
--target-dir	Specify the directory in which the application is to be created if you prefer not to use the default current working directory	Optional
--user-app-name	Specify the name of the application if you prefer to have a name other than the example's default name	Optional

Note: The project-creator-cli tool uses the git clone and make getlibs commands to fetch the repository and import the required libraries. For details, see the "Project creator tools" section of the ModusToolbox™ tools package user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mtb_user_guide.pdf).

Open the project

After the project has been created, you can open it in your preferred development environment.

Eclipse IDE

If you opened the Project Creator tool from the included Eclipse IDE, the project will open in Eclipse automatically.

For more details, see the Eclipse IDE for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_ide_user_guide.pdf).

Visual Studio (VS) Code

Launch VS Code manually, and then open the generated {project-name}.code-workspace file located in the project directory.

For more details, see the Visual Studio Code for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_vscode_user_guide.pdf).

Keil µVision

Double-click the generated {project-name}.cprj file to launch the Keil µVision IDE.

For more details, see the Keil µVision for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_uvision_user_guide.pdf).

IAR Embedded Workbench

Open IAR Embedded Workbench manually, and create a new project. Then select the generated {project-name}.ipcf file located in the project directory.

For more details, see the IAR Embedded Workbench for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_iar_user_guide.pdf).

Command line

If you prefer to use the CLI, open the appropriate terminal, and navigate to the project directory. On Windows, use the command-line 'modus-shell' program; on Linux and macOS, you can use any terminal application. From there, you can run various make commands.

For more details, see the ModusToolbox™ tools package user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mtb_user_guide.pdf).

Operation

1. Connect the board to your PC using the provided USB cable through the KitProg3 USB connector.

2. Program using one of the following:

   Using Eclipse IDE for ModusToolbox™ software

   1. Select the application project in the Project Explorer.

   2. In the Quick Panel, scroll down, and click <Application Name> Program.

   Using CLI

   From the terminal, execute the make program command to build and program the application using the default toolchain to the default target. The default toolchain and target are specified in the application's Makefile but you can override those values manually:

   make program TARGET=APP_<BSP> TOOLCHAIN=<toolchain>
   

   Example:

   make program TARGET=APP_CYW955913EVK-01 TOOLCHAIN=GCC_ARM
   

3. For CYW955913EVK-01 you will need to reset the kit for application to boot, not required for CYW955513EVK-01.

4. Since this is an empty app, the main objective is to add minimal source code which can be used as the base for other applications. This app has no observable output.

Design and implementation

This is a minimal starter application template for Infineon CYW55xxx embedded devices. This contains minimum set of initializations required to get started with CYW55xxx devices.

Related resources

Resources	Links
Device documentation	Contact infineon sales for device documentation
Development kits	Contact infineon sales for kit samples
Libraries on GitHub	mtb-pdl-cat5 – CYW55913 peripheral driver library (PDL) mtb-hal-cat5 – Hardware abstraction layer (HAL) library retarget-io – Utility library to retarget STDIO messages to a UART port
Tools	Eclipse IDE for ModusToolbox™ software – ModusToolbox™ software is a collection of easy-to-use software and tools enabling rapid development with Infineon MCUs, covering applications from embedded sense and control to wireless and cloud-connected systems using AIROC™ Wi-Fi and Bluetooth® connectivity devices.

Other resources

Infineon provides a wealth of data at www.infineon.com to help you select the right device, and quickly and effectively integrate it into your design.

Document history

Document title: CE237189 – Empty application template

Version	Description of change
1.0.0	New code example
1.1.0	Added support for CYW955913EVK-01
1.2.0	Added support for KIT-CYW55310-EVAL

---

© 2026, Infineon Technologies AG, or an affiliate of Infineon Technologies AG. All rights reserved. This software, associated documentation and materials ("Software") is owned by Infineon Technologies AG or one of its affiliates ("Infineon") and is protected by and subject to worldwide patent protection, worldwide copyright laws, and international treaty provisions. Therefore, you may use this Software only as provided in the license agreement accompanying the software package from which you obtained this Software. If no license agreement applies, then any use, reproduction, modification, translation, or compilation of this Software is prohibited without the express written permission of Infineon.
Disclaimer: UNLESS OTHERWISE EXPRESSLY AGREED WITH INFINEON, THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ALL WARRANTIES OF NON-INFRINGEMENT OF THIRD-PARTY RIGHTS AND IMPLIED WARRANTIES SUCH AS WARRANTIES OF FITNESS FOR A SPECIFIC USE/PURPOSE OR MERCHANTABILITY. Infineon reserves the right to make changes to the Software without notice. You are responsible for properly designing, programming, and testing the functionality and safety of your intended application of the Software, as well as complying with any legal requirements related to its use. Infineon does not guarantee that the Software will be free from intrusion, data theft or loss, or other breaches (“Security Breaches”), and Infineon shall have no liability arising out of any Security Breaches. Unless otherwise explicitly approved by Infineon, the Software may not be used in any application where a failure of the Product or any consequences of the use thereof can reasonably be expected to result in personal injury.