Process completed with exit code 101.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Send ROCs while switch paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::xcmpQueue::[XcmpMessageSent] 2` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::assetSwitchPool1::[LocalToRemoteSwitchExecuted] 2` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::balances::[Transfer] 2` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::xcmpQueue::[XcmpMessageSent] 3` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::assetSwitchPool1::[LocalToRemoteSwitchExecuted] 3` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::balances::[Transfer] 3` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

ConnectionIsNotSetError: Connection with sqlite database is not established. Check connection configuration. ❯ SqliteQueryRunner.query src/driver/sqlite/SqliteQueryRunner.ts:71:19 ❯ SelectQueryBuilder.loadRawResults src/query-builder/SelectQueryBuilder.ts:3805:43 ❯ SelectQueryBuilder.executeEntitiesAndRawResults src/query-builder/SelectQueryBuilder.ts:3551:37 ❯ SelectQueryBuilder.getRawAndEntities src/query-builder/SelectQueryBuilder.ts:1670:40 ❯ SelectQueryBuilder.getOne src/query-builder/SelectQueryBuilder.ts:1697:36 ❯ EntityManager.findOne src/entity-manager/EntityManager.ts:1215:14 ❯ Repository.findOne src/repository/Repository.ts:597:29 ❯ SqliteDatabase.queryStorage node_modules/@acala-network/chopsticks-db/dist/esm/base-sql.js:85:69 ❯ RemoteStorageLayer.get node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/storage-layer.js:32:25 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Send eKILT while switch Pair does not exist". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: WebSocket is not connected ❯ node_modules/@polkadot/rpc-provider/ws/index.js:273:27 ❯ WsProvider.__internal__send node_modules/@polkadot/rpc-provider/ws/index.js:270:16 ❯ WsProvider.send node_modules/@polkadot/rpc-provider/ws/index.js:258:34 ❯ Api.send node_modules/@acala-network/chopsticks-core/dist/esm/api.js:65:31 ❯ Api.getSystemChain node_modules/@acala-network/chopsticks-core/dist/esm/api.js:74:21 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:354:32 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/trappedAssets.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Trapped assets". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: WebSocket is not connected ❯ node_modules/@polkadot/rpc-provider/ws/index.js:273:27 ❯ WsProvider.__internal__send node_modules/@polkadot/rpc-provider/ws/index.js:270:16 ❯ WsProvider.send node_modules/@polkadot/rpc-provider/ws/index.js:258:34 ❯ Api.send node_modules/@acala-network/chopsticks-core/dist/esm/api.js:65:31 ❯ Api.getSystemChain node_modules/@acala-network/chopsticks-core/dist/esm/api.js:74:21 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:354:32 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/fullFlowSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Full e2e tests". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.