autoclicke-rs

An advanced cli autoclicker written in rust for Linux. Works on X11 (not tested) and Wayland. And on any installation that has uinput enabled.

Download latest binary

Ensure uinput kernel module is enabled

Without uinput kernel module this will not work.

sudo modprobe -i uinput

Either launch the program as root or add user to input group

I personally just launch the program as root, but you can also add you to the input group if you don't want to run it as root.

Download

https://github.com/LuuppiChan/autoclicke-rs/releases/latest/download/autoclicker

# Go to the folder you downloaded it to
cd ~/Downloads/autoclicker # Replace with the actual path
# Mark it as an executable
chmod +x autoclicker
# Run it (This just prints the help command)
autoclicker --help

This is not a permanent solution and you should move the binary to a bin/ folder.

Find your input device path

Usually mouses are something like /dev/input/event*

You can use evtest to find yours. If you don't have it installed you can install it from your package manager.

Features

This is just an output of the --help command.

This autoclicker can either work when holding down a mouse key, always when on and with mouse keys togging it on and off.

Usage: autoclicker [OPTIONS] [MOUSE_PATH]

Arguments:
  [MOUSE_PATH]
          Will autoclick based on this mouse

Options:
  -l, --left-click-delay <LEFT_CLICK_DELAY>
          Delay between clicks (default) or target cps
          
          [default: 0.05]

  -r, --right-click-delay <RIGHT_CLICK_DELAY>
          Delay between clicks (default) or target cps
          
          [default: 0.05]

  -f, --fast-click-delay <FAST_CLICK_DELAY>
          Fast mode can be enabled for left clicking. Delay between clicks (default) or target cps
          
          [default: 0.02]

  -c, --click-mode <CLICK_MODE>
          In what format are the input delays given. Use the same delay parameters in any case. A delay under 1000 nanoseconds will not scale linearly and will cap at around 17k cps. You can get faster by putting the click delay to zero

          Possible values:
          - delay: Delay between clicks
          - cps:   Target cps
          
          [default: delay]

  -m, --mode <MODE>
          Program operation mode

          Possible values:
          - hold:     Clicks when holding the button down
          - toggle:   Toggles clicking so you don't have to hold anything to click. Start delay determines whether hold or toggle mode is used
          - both:     Why not just have both? Hold and toggle
          - always:   Instantly starts to spam enabled keys before the program is killed
          - disabled: Just pass-through mouse events. I personally use this for disabling debounce time
          
          [default: hold]

  -d, --disable-on-click
          On toggle mode if you click, it will stop the autoclicker

      --enable-left
          Start left click enabled

      --enable-right
          Start right click enabled

      --enable-fast
          Start fast mode enabled

      --start-delay-left <START_DELAY_LEFT>
          Delay before to start left clicking
          
          [default: 0.1]

      --start-delay-right <START_DELAY_RIGHT>
          Delay before to start right clicking
          
          [default: 0.1]

      --randomize
          Whether to randomize the delay slightly

      --deviation <DEVIATION>
          How much can the calculated random can differ from base. In float percentage. Allowed range: 0 to 1
          
          [default: 0.3]

  -s, --scroll-changes-cps
          Change cps when autoclicking by scrolling. Left click takes priority when you're clicking with both. Will reset after stopping clicking. Does not work with always mode

      --factor <FACTOR>
          Factor of how much the scroll changes the delay
          
          [default: 1.1]

      --minimum-delay <MINIMUM_DELAY>
          Minimum delay allowed when scrolling. If fast mode is enabled, this is ignored. If input mode is cps this will be the max cps
          
          [default: 0]

  -u, --update-delay <UPDATE_DELAY>
          Interface update delay in milliseconds
          
          [default: 10]

      --spammers <SPAMMERS>
          How many spammers to spawn when activating the autoclicker. This is like a multiplier for cps. I will not take any responsibility for changing this parameter
          
          [default: 1]

  -d, --debug
          Print useful information for debugging. (Not fully ready)

  -h, --help
          Print help (see a summary with '-h')

  -V, --version
          Print version