Reverse_proxy

Update

• adding io_service_pool to treat io_service in a thread
• Modify write to file method
• No Redis enhancement
• No Lmax Distruptor enhancement
• Use Boost::asio to handle connection

Requirement

• Build IDE = Visual Studio 2019 (v142)
• HTTP Testing Tool(?) = Postman or Internet Browser

Testing

Build the .exe file

• Open the .sln file
• Select the desired architecture at Visual Studio's Toolbar (x86 or x64)
• Make sure the commented section in Main.cpp is correct (make sure it is release)
• Build it

Running

• Locate and run the exe file using cmd console by using the following format:

C:\Users\User> cd <project location>

C:\Users\User\<project location>> cd <exe directory location>

C:\Users\User\<project location>\<exe directory location>> tcpproxy_server.exe

C:\Users\User\<project location>\<exe directory location>> tcpproxy_server.exe <this_server_ip> <this_server_port> <forward_server_ip> <forward_server_port>

• this_server_ip: you can define this_server_ip with the unused IPv4 inside your network (127.0.0.1 ~ 127.0.255.255)

• forward_server_ip: you can define it with the desired forward IP (eg: 54.156.165.4)

• this_server_port & forward_server_port: for the sake of simplicity, you can use port 80

• The output file name is dumpData.txt and located at the same folder as the .exe file

Testing

• Using your HTTP Testing Tool, try to call this_server_ip:this_server_port
• The cmd console will show the transmitted raw data
• The output file will record all the record continuously

Credits

Arash Partow (https://github.com/ArashPartow/proxy)