Hackintosh-LegionY530-HighSierra

NOTE : I AM NOT RESPONSIBLE FOR ANY DAMAGES DONE TO YOUR COMPUTER. YOU SHOULD KNOW WHAT YOU ARE DOING, AND YOU SHOULD KNOW HOW TO RECOVER FROM ANY PROBLEMS. DO IT AT YOUR OWN RISK.

Hardware

	Hardware	HighSierra Compatibility
CPU	Intel i5-8300H	Works perfectly base clock 2.4 Ghz and boost upto 4.00Ghz
dGPU	Nvidia GTX1050Ti	Disabled in High Sierra
GPU	Intel UHD Graphics 630 (1536MB)	No issues
Storage	SSD : Toshiba 120Gb PCIe M.2	No issues
Screen	15.6" Full HD@60Hz,1920x1080 IPS	No issues
WiFI	Intel Wireless-AC 9560	Incompatible
Touchpad	I2C HID Touchpad (TPD0)	Working
USB	USB 3.1 Gen1x3	No issues
	Type-C 3.1 Gen1	No issues
HDMI and MiniDP	Not Working due to disabled dGPU	Nvidia disabled
Battery	52.3 Wh	2-3 hours battery Backup

Steps to get High Sierra working

1. Create a Clover Bootable USB drive.
2. Copy the above three folders to the Bootable USB drive and replace them.
3. Boot via USB drive and select your High Sierra drive.
4. Download the Clover Configurator.
5. Mount the EFI partition of the Bootable USB.
6. Copy the contents to the EFI partition of the System.
7. Reboot the system and boot again from the USB.
8. Select Clover Boot Options, and then Add Clover Boot Entries , now you have the Clover in your system and set it default from the BIOS menu.

After getting the working clover :

1. Open Clover Configurator.
2. Mount the EFI partition.
3. Navigate to config.plist in the clover folder.
4. Open it in clover configurator.
5. navigate to SMBIOS section.
6. Generate a new serial key and check for its coverage.
7. YOU SHOULD NOT USE A VALID SERIAL KEY.

What's Working :

• Brightness control (Use Fn+P and Fn+K, Key mapping can be changed)
• Intel UHD Graphics (1536Mb) -Two Fan Speed (Default and Max)
• All USB 3.1 and type-C (basic USB Functions)
• And other Basic Functionality
• TrackPad Detected and Working

Not able to get working touchpad ?

1. Press Fn+Tab, Fn+asdfgh and then Fn+O and then save changes and reboot. Press F2 when you see a Blue Box.
2. Enter Advance BIOS Menu and go to ACPI Menu.
3. Set it to Auto configuration.
4. Find Toucpad Delay Option in the IO settings and set the delay to 0 from 68.
5. Save the changes and Reboot.
6. Delete AppleHPM.kext, AppleIntelLpssI2C.kext, AppleIntelLpssI2CController.kext from Extensions Folder
7. Reboot the OS

What's Not Working:

• Wifi and Bluetooth
• Trackpad (Still working on it)
• Facetime,iMessages due to no valid serial key
• Numpad
• Unable to use type-C to hdmi convertor

ToDo

• I2C Touchpad
• Brightness Control
• Sound
• Fix Black Screen when laptop sleeps

Credits

InsanelyMac

RehabMan

MaLd0n

Olarila.com