Q2.4.8

Q2.4.6 to Q 2.4.8

• QAcquire - Fixed an issue where QAcquire failed to function properly on systems without Local Storage.
• QServer - Standardized sensitivity scaling across all charge channels. The data stream will no longer be scaled according to the charge sensitivity setting. Users must therefore account for this when converting voltage to measurement units.

Q 2.4.6

Q2.4.4 to Q 2.4.6

• QServer - Resolved an issue in the data packet packing engine which affected header alignment in the stream. This issue was introduced in Q2.4.2.

Q2.3.7

Hotfix for Q2.3.x:

• Improved stability for SC4210 cards and added CAN42S support.

Q 2.4.4

Q2.4.3 to Q 2.4.4

• QServer - Resolved a phase delay issue affecting analog data channels.

Q 2.4.3

Q2.4.2 to Q 2.4.3

• QServer - Fixed a bug where the Tacho Generic Channel Header timestamp was incorrect.
• QServer - ALO Mirroring support added for DCH42 module.

Q 2.4.2

Q2.3.4 to Q 2.4.2

• New Features
  • QAcquire
    • Introduced minimum / maximum peak detection for analog channels, including a feature to hold the peaks.
    • Added the ability to set the recording duration in local storage before starting a recording.
    • Added a 'Reset' button to the main navigation. This will reset QServer and QAcquire settings to defaults.
    • Sidebar and fonts rework
      • Reworked all fonts to improve accessibility
      • Reworked the sidebar to represent the system as a logical mapping of the hardware
      • Removed the visual view and introduced a compact mode for the sidebar
      • Added an options menu to allow users to switch between list and compact views for the sidebar
    • Made changes to the sidebar channels and channel ID
      • Adjusted the display of the channel number in the list and included the QServer channel ID in the channel circle.
      • Added intermediate states to the local storage time string
      • Introduced icons for data status (local storage and streaming) for the sidebar channels in both list and visual mode.
  • QServer
    • Added an endpoint to get all the measurements recorded on local storage.
    • PTP network transport protocol can be configured using the Web Server.
• Bug fixes:
  • QDataManager
    • Resolved channel ID mismatches in local storage between QAcquire and QDataManager.
    • Local storage channel integrity field matches the data stream channel integrity field.
    • Fixed issue with plotting measurements less than 2 seconds.
    • Fixed local storage module ID assignment.
    • Fixed THM range scaling when exporting Local Storage measurements.
    • Fixed a bug where exported data is periodically zero.
  • QAcquire
    • Fixed a bug where the local storage start/stop button did not apply the settings correctly.
    • Fixed the bug where data state icons were disappearing
    • Fixed the bug where the slider component failed to update the value offset when switching between vertical split and normal mode
    • Local storage prevents the user from recording, displaying an error message if the disk is full.
    • Local storage settings are now disabled during recordings and removed arrow buttons for number inputs.
    • Fixed connection handling issues with QServer.
  • QServer
    • Fixed a bug where TEDS did not work on the MicroQ built-in ICP channels.
    • Local storage recording will return an error message if the disk space is full (disk reached the end of its reliable writing capacity).
    • PQ45 - Fixed a bug where the WiFi did not work when encryption is enabled.
    • WSB42Xx - Random periodic spikes/discharge distortion in constant current modes is now resolved.
    • CAN42S - Incorrect/inconsistent temperature readings fixed.
    • MicroQ - Fixed a bug where the XMC channels lose synchronisation with the system when using PTP. As a consequence, this bugfix causes QServer to reboot the MicroQ when enabling PTP or changing the Master Sampling Rate while PTP is enabled.

Q 2.3.4

Q2.3.3 to Q 2.3.4

• MicroQ - Fixed a bug where the XMC channels lose synchronisation with the system when using PTP. As a consequence, this bugfix causes QServer to reboot the MicroQ when enabling PTP or changing the Master Sampling Rate while PTP is enabled.

Q2.3.3

Q2.3.2 to Q 2.3.3

• PQ45 - Fixed a bug that caused the system to crash when an input to a CAN module is an unaligned size.

Q2.3.2

Q2.3.1 to Q 2.3.2

• MicroQ - Fixed a bug where the built in channels were slightly out of sync with the SC’s channels.

Q2.3.1

Q2.3.0 to Q2.3.1

• QServer - Fixed a bug where modules could miss a test restart after changing the sampling rate, causing a phase delay.