building instructions

1. remove the 2 screws that hold the ultrasonic sensor

2. unplug both connections to the ultrasonic sensor

3. remove the cyberPI and loosen the 4 bolts

4. prepare camera subassembly (2* M4x6 + 2* M4x22 + angled bracket + extension piece)

5. mount 90deg bracket to mbot2 with the screws from the ultrasonic sensor (2* M4x14)

6. mount ultrasonic sensor and camera sub assembly (2* M4 Nuts + 2* M4x22)

7. tighten 4 bolts and put back cyberpi

8. connect all the cables to the ultrasonic sensor and the camera