Control-Industrial-Processes-V-1.6.7

Developer: Navid Derakhshandeh

Email: [email protected]

Email: [email protected]

Abstract: I have Developed Software Package that Can Monitor Industrial Processes and Control Industrial Tasks. The Development of This Software Package Has Taken 30 Months to date. This Software Package Has many Ability. For Instance, You Can Communicate With Industrial Devices By USART RS232,MODBU, OPC UA, PROFINET And MQTT protocols. also you can Control three-Axis CNC's. IF you want Get Further Information Read This README File.

Main Environment

MODBUS Protocol

If any Problem Happen. Software Automatically Establish Record In Database. Moreover, If Problem has Very High Hazard, Software Plays Siren.

After Back to Normal Situation, Supervisor And inspector can Check Condition Happened by Click Get Report Icon.

Get Report from Main Environment or Event Icon in Menu Bar:

RS-232:

OPC UA:

MQTT:

In this Software, You Can Design Your Monitoring Environment.

Workbench Environment:

MODBUS Design Workbench:

if you click on Generate button you see on your design workbench some textboxes. before that you must choose your range of your registers you want, by combobox if you choose 0, your range include entire of registers that active on your modbus network. textboxes which generated by your choice. have been linked to modbus registers, and you can recieve value of your registers realtime.then you can click on industrial symbols and draw them on your design workbench.

In This Software You can Make Data Model and use For Analysis Your Processes. For Develop This Attribute I used ML.NET.

For This Software Package, I Developed Internal DSL You can Monitor Your Processes with Commands.

First Internal DSL:

Second Internal DSL:

In This Software Package, You have many Communication Features. You can chat with Other Parts of your Industrial Environment. And you can Send or Receive Data.

In this Software Package, You Can Get Daily Report, And Draw Graph.

PROFINET:

By this package you can control three-Axis CNC's. You can Start, Stop Machining Cycle. and load G-Code Files and send them to the CNC for processing.

You Can Download This Package and wide your Idea.

Performing Software, The First Video:

https://it.linkedin.com/posts/navid-derakhshandeh-6222331a5_profinet-plc-modbus-activity-7312958915736932353-hz1t

The Second Video:

https://www.linkedin.com/posts/activity-7315642790841872387-tJFg?utm_source=share&utm_medium=member_desktop&rcm=ACoAAC_o8roB3g4DEbBIVruRZEHiCPUKkHjvW6E

The Third Video:

https://www.linkedin.com/posts/activity-7316919517387927552-xqzg?utm_source=share&utm_medium=member_android&rcm=ACoAAC_o8roB3g4DEbBIVruRZEHiCPUKkHjvW6E