for every deprecated sensor, mentioned deprecated and added nasa c styling

examples/Sensors/I2C/EZO/EZO-CO2/EZO-CO2.ino

@@ -1,29 +1,34 @@
 /**
  * EZO CO2 Sensor Example
- *
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
+ * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
 
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_EZOCO2/Loom_EZOCO2.h>
 
+
 Manager manager("Device", 1);
 
 // Manager Instance,      Address, useMux
 Loom_EZOCO2 ezoCO2(manager, 0x69, false);
 
-void setup() {
 
+void setup() 
+{
   // Start the serial interface
   manager.beginSerial();
 
   // Initialize the manager
   manager.initialize();
-
 }
 
-void loop() {
+
+void loop() 
+{
   // Measure and package the data from the sensors
   manager.measure();
 
@@ -35,5 +40,4 @@ void loop() {
 
   // Wait for 2 seconds
   manager.pause(2000);  
-
-}
+}

examples/Sensors/I2C/EZO/EZO-DisOxygen/EZO-DisOxygen.ino

@@ -1,29 +1,34 @@
 /**
  * EZO Dissolved Oxygen Sensor Example
- *
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
+ * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
 
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_EZODO/Loom_EZODO.h>
 
+
 Manager manager("Device", 1);
 
 // Manager Instance,      Address, useMux
 Loom_EZODO ezoDO(manager, 0x61, false);
 
-void setup() {
 
+void setup() 
+{
   // Start the serial interface
   manager.beginSerial();
 
   // Initialize the manager
-  manager.initialize();
-
+  manager.initialize(); 
 }
 
-void loop() {
+
+void loop() 
+{
   // Measure and package the data from the sensors
   manager.measure();
 
@@ -35,5 +40,4 @@ void loop() {
 
   // Wait for 2 seconds
   manager.pause(2000);  
-
 }

examples/Sensors/I2C/EZO/EZO-ORP/EZO-ORP.ino

@@ -1,29 +1,34 @@
 /**
  * EZO ORP Sensor Example
- *
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
+ * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
 
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_EZOORP/Loom_EZOORP.h>
 
+
 Manager manager("Device", 1);
 
 // Manager Instance,      Address, useMux
 Loom_EZOORP ezoORP(manager, 0x62, false);
 
-void setup() {
 
+void setup() 
+{
   // Start the serial interface
   manager.beginSerial();
 
   // Initialize the manager
-  manager.initialize();
-
+  manager.initialize(); 
 }
 
-void loop() {
+
+void loop() 
+{
   // Measure and package the data from the sensors
   manager.measure();
 
@@ -35,5 +40,4 @@ void loop() {
 
   // Wait for 2 seconds
   manager.pause(2000);  
-
 }

examples/Sensors/I2C/EZO/EZO-PH/EZO-PH.ino

@@ -1,29 +1,34 @@
 /**
  * EZO PH Sensor Example
- *
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
+ * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
 
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_EZOPH/Loom_EZOPH.h>
 
+
 Manager manager("Device", 1);
 
 // Manager Instance,      Address, useMux
 Loom_EZOPH ezoPH(manager, 0x63, false);
 
-void setup() {
 
+void setup() 
+{
   // Start the serial interface
   manager.beginSerial();
 
   // Initialize the manager
-  manager.initialize();
-
+  manager.initialize(); 
 }
 
-void loop() {
+
+void loop() 
+{
   // Measure and package the data from the sensors
   manager.measure();
 
@@ -34,6 +39,5 @@ void loop() {
   manager.display_data();  
 
   // Wait for 2 seconds
-  manager.pause(2000);  
-
+  manager.pause(2000);    
 }

examples/Sensors/I2C/EZO/EZO-RGB/EZO-RGB.ino

@@ -1,29 +1,34 @@
 /**
  * EZO RGB Sensor Example
- *
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
+ * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
 
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_EZORGB/Loom_EZORGB.h>
 
+
 Manager manager("Device", 1);
 
 // Manager Instance,      Address, useMux
 Loom_EZORGB ezoRGB(manager, 0x70, false);
 
-void setup() {
 
+void setup() 
+{
   // Start the serial interface
   manager.beginSerial();
 
   // Initialize the manager
-  manager.initialize();
-
+  manager.initialize(); 
 }
 
-void loop() {
+
+void loop() 
+{
   // Measure and package the data from the sensors
   manager.measure();
 
@@ -35,5 +40,4 @@ void loop() {
 
   // Wait for 2 seconds
   manager.pause(2000);  
-
 }

examples/Sensors/I2C/K30/K30.ino

@@ -1,22 +1,24 @@
 /**
  * K30 Example code
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
  * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
 
-
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_K30/Loom_K30.h>
 
+
 Manager manager("Device", 1);
 
-// Reads the battery voltage
 // Manger Instance, Address Enable Warmup, Value Multiplier
 Loom_K30 k30(manager, false, 0x68, true, 1);
 
-void setup() {
 
+void setup() 
+{
   // Start the serial interface and wait for the user to open the serial monitor
   manager.beginSerial();
 
@@ -31,10 +33,10 @@ void setup() {
 
   // Print the JSON document to the Serial monitor
   manager.display_data();
-
 }
 
-void loop() {
-  // put your main code here, to run repeatedly:
 
+void loop() 
+{
+  // put your main code here, to run repeatedly:
 }

examples/Sensors/I2C/T6793/T6793.ino

@@ -1,8 +1,11 @@
 /**
- * This is an example use case for using the SEN55 Sensor
+ * This is an example use case for using the SEN55 Sensor. 
+ * HARDWARE DEPRECATED - This sensor is no longer supported on the current
+ * board profile. Use at your own risk.
  * 
  * MANAGER MUST BE INCLUDED FIRST IN ALL CODE
  */
+
 #include <Loom_Manager.h>
 
 #include <Sensors/I2C/Loom_T6793/Loom_T6793.h>