chore: internal release notes for 0.3.0 (#12471)

api/release-notes-internal.md

@@ -4,9 +4,9 @@ For more details about this release, please see the full [technical change log][
 
 ---
 
-# Internal Release 0.2.0
+# Internal Release 0.3.0
 
-This is first internal release 0.2.0 for the Opentrons Flex robot software, involving both robot control and the on-device display.
+This is internal release 0.3.0 for the Opentrons Flex robot software, involving both robot control and the on-device display.
 
 Some things are known not to work, and are listed below. Specific compatibility notes about peripheral hardware are also listed.
 
@@ -21,7 +21,6 @@ Some things are known not to work, and are listed below. Specific compatibility
 ## Big Things That Don't Work Yet So Don't Report Bugs About Them
 
 ### ODD
-- Attach, detach, and calibration flows for pipettes or gripper
 - Deleting protocols stored on the robot via the ODD
 - Changing the text size on the ODD through the settings
 
@@ -35,8 +34,10 @@ Some things are known not to work, and are listed below. Specific compatibility
 ## Reasonably Sized New Things
 ### ODD
 - Liquid setup has come to protocol setup page
+- Gripper and pipette attach and calibration flows!
+- Running protocol page
 ### Robot Control
-- 8-channel pipettes now will use more than 0 amps to pick up tips
+- Motion configuration fixes from harware testing
 - Module calibration exists in the protocol engine; you can use a script to run it with any pipette for any module. The data will be saved for inspection, but will not be loaded during protocols.
 
 ## Big Things That Do Work Please Do Report Bugs About Them
@@ -50,6 +51,8 @@ Some things are known not to work, and are listed below. Specific compatibility
 
 ### ODD
 - Protocol execution
+- Protocol run monitoring
+- Attach and calibrate
 - Network connection management, including viewing IP addresses and connecting to wifi networks
 - Automatic updates of robot software when new internal releases are created
 - Chrome remote devtools - if you enable them and then use Chrome to go to robotip:9223 you'll get devtools

app-shell/build/release-notes-internal.md

@@ -3,15 +3,15 @@ For more details about this release, please see the full [technical changelog][]
 
 ---
 
-# Internal Release 0.2.0
+# Internal Release 0.3.0
 
-This is 0.2.0, an internal release for the app supporting the Opentrons Flex.
+This is 0.3.0, an internal release for the app supporting the Opentrons Flex.
 
 This is still pretty early in the process, so some things are known not to work, and are listed below. Some things that may surprise you do work, and are also listed below. There may also be some littler things of note, and those are at the bottom.
 
 ## New Stuff In This Release
 - Gripper attach and calibration flows
-- Tipracks say flex now
+
 
 ## Big Things That Don't Work Yet So Don't Report Bugs About Them
 - Attach, detach, and calibration flows for anything from the protocol setup page