Add slicer profiles

Slicer_Profiles/OrcaSlicer/Micron 0.4 nozzle.json

@@ -0,0 +1,19 @@
+{
+    "change_filament_gcode": "M600",
+    "from": "system",
+    "inherits": "Voron 2.4 250 0.4 nozzle",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n\n; SET_PRINT_STATS_INFO Support\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "machine_start_gcode": "PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}\n\n; SET_PRINT_STATS_INFO Support\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]",
+    "manual_filament_change": "1",
+    "name": "Micron 0.4 nozzle",
+    "print_host": "127.0.0.1",
+    "printable_area": [
+        "0x0",
+        "120x0",
+        "120x120",
+        "0x120"
+    ],
+    "printable_height": "120",
+    "printer_settings_id": "Micron 0.4 nozzle",
+    "version": "1.10.0.1"
+}

Slicer_Profiles/OrcaSlicer/Micron+ 0.4 nozzle.json

@@ -0,0 +1,19 @@
+{
+    "change_filament_gcode": "M600",
+    "from": "system",
+    "inherits": "Voron 2.4 250 0.4 nozzle",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n\n; SET_PRINT_STATS_INFO Support\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+    "machine_start_gcode": "PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}\n\n; SET_PRINT_STATS_INFO Support\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]",
+    "manual_filament_change": "1",
+    "name": "Micron+ 0.4 nozzle",
+    "print_host": "127.0.0.1",
+    "printable_area": [
+        "0x0",
+        "175x0",
+        "175x185",
+        "0x185"
+    ],
+    "printable_height": "180",
+    "printer_settings_id": "Micron+ 0.4 nozzle",
+    "version": "1.10.0.1"
+}

Slicer_Profiles/OrcaSlicer/Process presets/0.12mm Fine.json

@@ -0,0 +1,54 @@
+{
+    "bottom_surface_pattern": "monotonicline",
+    "bridge_density": "50%",
+    "bridge_flow": "0.85",
+    "bridge_speed": "80",
+    "brim_object_gap": "0",
+    "brim_width": "0",
+    "default_acceleration": "0",
+    "default_jerk": "0",
+    "elefant_foot_compensation": "0.1",
+    "enable_arc_fitting": "1",
+    "ensure_vertical_shell_thickness": "ensure_moderate",
+    "from": "system",
+    "inherits": "0.12mm Fine @Voron",
+    "initial_layer_line_width": "125%",
+    "inner_wall_line_width": "115%",
+    "inner_wall_speed": "240",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_line_width": "140%",
+    "internal_solid_infill_speed": "250",
+    "ironing_flow": "25%",
+    "ironing_speed": "120",
+    "layer_height": "0.12",
+    "line_width": "115%",
+    "name": "0.12mm Fine",
+    "only_one_wall_top": "1",
+    "outer_wall_line_width": "100%",
+    "outer_wall_speed": "160",
+    "overhang_1_4_speed": "120",
+    "overhang_2_4_speed": "80",
+    "overhang_3_4_speed": "60",
+    "overhang_4_4_speed": "30",
+    "print_settings_id": "0.12mm Fine",
+    "seam_position": "back",
+    "skirt_height": "0",
+    "small_area_infill_flow_compensation": "1",
+    "small_perimeter_speed": "40%",
+    "small_perimeter_threshold": "5",
+    "sparse_infill_line_width": "160%",
+    "sparse_infill_speed": "270",
+    "support_line_width": "100%",
+    "support_speed": "200",
+    "support_style": "tree_hybrid",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0",
+    "top_surface_line_width": "100%",
+    "top_surface_speed": "120",
+    "travel_speed": "450",
+    "version": "1.10.0.1",
+    "wall_generator": "classic",
+    "wall_loops": "2",
+    "wipe_on_loops": "1"
+}

Slicer_Profiles/OrcaSlicer/Process presets/0.16mm Optimal.json

@@ -0,0 +1,54 @@
+{
+    "bottom_surface_pattern": "monotonicline",
+    "bridge_density": "50%",
+    "bridge_flow": "0.85",
+    "bridge_speed": "80",
+    "brim_object_gap": "0",
+    "brim_width": "0",
+    "default_acceleration": "0",
+    "default_jerk": "0",
+    "elefant_foot_compensation": "0.1",
+    "enable_arc_fitting": "1",
+    "ensure_vertical_shell_thickness": "ensure_moderate",
+    "from": "system",
+    "inherits": "0.12mm Fine @Voron",
+    "initial_layer_line_width": "125%",
+    "inner_wall_line_width": "115%",
+    "inner_wall_speed": "240",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_line_width": "140%",
+    "internal_solid_infill_speed": "250",
+    "ironing_flow": "25%",
+    "ironing_speed": "120",
+    "layer_height": "0.16",
+    "line_width": "115%",
+    "name": "0.16mm Optimal",
+    "only_one_wall_top": "1",
+    "outer_wall_line_width": "100%",
+    "outer_wall_speed": "160",
+    "overhang_1_4_speed": "120",
+    "overhang_2_4_speed": "80",
+    "overhang_3_4_speed": "60",
+    "overhang_4_4_speed": "30",
+    "print_settings_id": "0.16mm Optimal",
+    "seam_position": "back",
+    "skirt_height": "0",
+    "small_area_infill_flow_compensation": "1",
+    "small_perimeter_speed": "40%",
+    "small_perimeter_threshold": "5",
+    "sparse_infill_line_width": "160%",
+    "sparse_infill_speed": "270",
+    "support_line_width": "100%",
+    "support_speed": "200",
+    "support_style": "tree_hybrid",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0",
+    "top_surface_line_width": "100%",
+    "top_surface_speed": "120",
+    "travel_speed": "450",
+    "version": "1.10.0.1",
+    "wall_generator": "classic",
+    "wall_loops": "2",
+    "wipe_on_loops": "1"
+}

Slicer_Profiles/OrcaSlicer/Process presets/0.20mm PIF.json

@@ -0,0 +1,57 @@
+{
+    "bottom_shell_layers": "5",
+    "bottom_shell_thickness": "1",
+    "bottom_surface_pattern": "monotonicline",
+    "bridge_density": "50%",
+    "bridge_flow": "0.85",
+    "bridge_speed": "80",
+    "brim_object_gap": "0",
+    "brim_width": "0",
+    "default_acceleration": "0",
+    "default_jerk": "0",
+    "elefant_foot_compensation": "0.1",
+    "enable_arc_fitting": "1",
+    "ensure_vertical_shell_thickness": "ensure_moderate",
+    "from": "system",
+    "inherits": "0.20mm Standard @Voron",
+    "initial_layer_line_width": "125%",
+    "initial_layer_print_height": "0.25",
+    "inner_wall_line_width": "115%",
+    "inner_wall_speed": "240",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_line_width": "140%",
+    "internal_solid_infill_speed": "250",
+    "ironing_flow": "25%",
+    "ironing_speed": "120",
+    "line_width": "115%",
+    "name": "0.20mm PIF",
+    "only_one_wall_top": "1",
+    "outer_wall_line_width": "100%",
+    "outer_wall_speed": "160",
+    "overhang_1_4_speed": "120",
+    "overhang_2_4_speed": "80",
+    "overhang_3_4_speed": "60",
+    "overhang_4_4_speed": "30",
+    "print_settings_id": "0.20mm PIF",
+    "seam_position": "back",
+    "skirt_height": "0",
+    "small_area_infill_flow_compensation": "1",
+    "small_perimeter_speed": "40%",
+    "small_perimeter_threshold": "5",
+    "sparse_infill_density": "40%",
+    "sparse_infill_line_width": "160%",
+    "sparse_infill_speed": "270",
+    "support_line_width": "100%",
+    "support_speed": "200",
+    "support_style": "tree_hybrid",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "1",
+    "top_surface_line_width": "100%",
+    "top_surface_speed": "120",
+    "travel_speed": "450",
+    "version": "1.10.0.1",
+    "wall_generator": "classic",
+    "wall_loops": "4",
+    "wipe_on_loops": "1"
+}

Slicer_Profiles/OrcaSlicer/Process presets/0.20mm Standard.json

@@ -0,0 +1,54 @@
+{
+    "bottom_surface_pattern": "monotonicline",
+    "bridge_density": "50%",
+    "bridge_flow": "0.85",
+    "bridge_speed": "80",
+    "brim_object_gap": "0",
+    "brim_width": "0",
+    "default_acceleration": "0",
+    "default_jerk": "0",
+    "elefant_foot_compensation": "0.1",
+    "enable_arc_fitting": "1",
+    "ensure_vertical_shell_thickness": "ensure_moderate",
+    "from": "system",
+    "inherits": "0.20mm Standard @Voron",
+    "initial_layer_line_width": "125%",
+    "initial_layer_print_height": "0.25",
+    "inner_wall_line_width": "115%",
+    "inner_wall_speed": "240",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_line_width": "140%",
+    "internal_solid_infill_speed": "250",
+    "ironing_flow": "25%",
+    "ironing_speed": "120",
+    "line_width": "115%",
+    "name": "0.20mm Standard",
+    "only_one_wall_top": "1",
+    "outer_wall_line_width": "100%",
+    "outer_wall_speed": "160",
+    "overhang_1_4_speed": "120",
+    "overhang_2_4_speed": "80",
+    "overhang_3_4_speed": "60",
+    "overhang_4_4_speed": "30",
+    "print_settings_id": "0.20mm Standard",
+    "seam_position": "back",
+    "skirt_height": "0",
+    "small_area_infill_flow_compensation": "1",
+    "small_perimeter_speed": "40%",
+    "small_perimeter_threshold": "5",
+    "sparse_infill_line_width": "160%",
+    "sparse_infill_speed": "270",
+    "support_line_width": "100%",
+    "support_speed": "200",
+    "support_style": "tree_hybrid",
+    "support_type": "tree(auto)",
+    "top_shell_layers": "5",
+    "top_shell_thickness": "0",
+    "top_surface_line_width": "100%",
+    "top_surface_speed": "120",
+    "travel_speed": "450",
+    "version": "1.10.0.1",
+    "wall_generator": "classic",
+    "wall_loops": "2",
+    "wipe_on_loops": "1"
+}

Slicer_Profiles/SuperSlicer/Micron+.ini

@@ -0,0 +1,129 @@
+# generated by SuperSlicer 2.5.59.13 on 2025-02-10 at 19:17:25 UTC
+arc_fitting = 0
+arc_fitting_tolerance = 5%
+bed_shape = 0x0,175x0,175x185,0x185
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+color_change_gcode = 
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Basic PLA @VORON"
+default_print_profile = 0.15mm 0.4nozzle
+deretract_speed = 30
+end_gcode = print_end    ;end script from macro
+extra_loading_move = -2
+extruder_colour = #FFE3CA
+extruder_fan_offset = 0%
+extruder_offset = 0x0
+extruder_temperature_offset = 0
+fan_kickstart = 0
+fan_percentage = 0
+fan_printer_min_speed = 0
+fan_speedup_overhangs = 1
+fan_speedup_time = 0
+feature_gcode = 
+gcode_ascii = 0
+gcode_filename_illegal_char = [<>:"/\\\\|?*]
+gcode_flavor = klipper
+gcode_precision_e = 5
+gcode_precision_xyz = 3
+high_current_on_filament_swap = 0
+host_type = octoprint
+inherits = Voron_v2_250_afterburner 0.4 nozzle
+init_z_rotate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n\n; SET_PRINT_STATS_INFO Support\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}
+lift_min = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_gcode_per_second = 1500
+max_layer_height = 0.3
+max_print_height = 180
+milling_diameter = 
+milling_toolchange_end_gcode = 
+milling_toolchange_start_gcode = 
+milling_z_lift = 
+min_layer_height = 0.0375
+min_length = 0.035
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = 
+print_host = 
+printer_custom_variables = 
+printer_model = Voron_v2_250_afterburner
+printer_notes = Unoffical profile.\nE3DV6
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+printhost_port = 
+remaining_times = 0
+remaining_times_type = m73
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 0.75
+retract_length_toolchange = 10
+retract_lift = 0.4
+retract_lift_above = 0.2
+retract_lift_before_travel = 2
+retract_lift_below = 500
+retract_lift_first_layer = 0
+retract_lift_top = "All surfaces"
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+seam_gap = 15%
+seam_gap_external = 0
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = ; M190 S0\n; M109 S0 ; uncomment to remove set&wait temp gcode added automatically after this start gcode\nprint_start EXTRUDER={first_layer_temperature[initial_extruder] + extruder_temperature_offset[initial_extruder]} BED=[first_layer_bed_temperature] CHAMBER=[chamber_temperature]\n\n; SET_PRINT_STATS_INFO Support\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]
+start_gcode_manual = 0
+template_custom_gcode = 
+thumbnails = 64x64,400x300
+thumbnails_color = #018aff
+thumbnails_custom_color = 0
+thumbnails_end_file = 0
+thumbnails_format = PNG
+thumbnails_tag_format = 0
+thumbnails_with_bed = 1
+time_cost = 0
+time_estimation_compensation = 100%
+time_start_gcode = 20
+time_toolchange = 30
+tool_name = ""
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+wipe_advanced = 0
+wipe_advanced_algo = linear
+wipe_advanced_multiplier = 60
+wipe_advanced_nozzle_melted_volume = 120
+wipe_extra_perimeter = 0
+wipe_inside_depth = 50%
+wipe_inside_end = 1
+wipe_inside_start = 0
+wipe_only_crossing = 1
+wipe_speed = 0
+z_offset = 0
+z_step = 0.00625