After consulting the Claude, I've realized its possible to configure the memory maps and disable rebar WITHOUT using patched ACPI tables. I have tested this myself and I currently have testsigning off and have GPU working!
All you have to do is Install the nvidia RTX Spark drivers manually by doing the following:
- Download "RTX Spark Developer Driver" from https://forums.developer.nvidia.com/t/rtx-spark-developer-preview/377106
- Extract EXE with 7zip.
- Open Device Manager, Locate Microsoft Basic Display Adapter. Right Click, Open Properties
- Navigate to driver tab at the very top, click "Update Driver", then "Browse my Computer for Drivers"
- Click "Let me pick from a list of available drivers on my computer" at the bottom
- Select "Have Disk?" and navigate to the 7zip extracted nvidia driver folder
- Select Nvidia Desktop Device
Now reboot (keep eGPU plugged in)
You'll see device manager show Nvidia Desktop Device as Code 12. Run the following script as admin
python rebar_fix.py. You should see your GPU as follows.

If you see it and its the device you would like to adjust the memory maps of. Do the following:
python rebar_fix.py --apply- Disconnect your GPU
- Reconnect your GPU to the SAME port
- Wait about 30 seconds (keep device manager open)
You should see your eGPU connected monitors fire up and device manager mark "Nvidia Desktop Device" as "This device is working properly".
