final test build for both?

Author: Shadowtrance

Boards/WaveshareS3TouchLcd128/Source/WaveshareS3TouchLcd128.cpp

@@ -67,7 +67,9 @@ extern const Configuration waveshare_s3_touch_lcd_128 = {
             .isMutable = false,
             .lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
         },
-        // SD card
+        // SD card available via external sd card module and uses VSYS (5V) / GND / IO15 / IO16 / IO17 / IO18 pins.
+        // Common micro sd card module you'd find on aliexpress with voltage regulator onboard. Others may work.
+        // JST SH 1.0 Header, GND / VSYS (5V) / RESET / BOOT / GND / 3.3V / IO15 / IO16 / IO17 / IO18 / IO21 / IO33
          spi::Configuration {
             .device = SPI3_HOST,
             .dma = SPI_DMA_CH_AUTO,

sdkconfig.board.waveshare-s3-lcd-13

@@ -45,11 +45,11 @@ CONFIG_FLASHMODE_QIO=y
 # Hardware: SPI RAM
 CONFIG_ESP32S3_SPIRAM_SUPPORT=y
 CONFIG_SPIRAM_MODE_OCT=y
-#CONFIG_SPIRAM_SPEED_120M=y
+CONFIG_SPIRAM_SPEED_120M=y
 CONFIG_SPIRAM_USE_MALLOC=y
 CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
 # SPI Flash (can set back to 80MHz after ESP-IDF bug is resolved)
-#CONFIG_ESPTOOLPY_FLASHFREQ_120M=y
+CONFIG_ESPTOOLPY_FLASHFREQ_120M=y
 # LVGL
 # TODO: Update DPI
 CONFIG_LV_DPI_DEF=143

sdkconfig.board.waveshare-s3-touch-lcd-128

@@ -45,7 +45,7 @@ CONFIG_FLASHMODE_QIO=y
 # Hardware: SPI RAM
 CONFIG_ESP32S3_SPIRAM_SUPPORT=y
 CONFIG_SPIRAM_MODE_QUAD=y
-#CONFIG_SPIRAM_SPEED_120M=y
+CONFIG_SPIRAM_SPEED_120M=y
 CONFIG_SPIRAM_USE_MALLOC=y
 CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y
 # SPI Flash (can set back to 80MHz after ESP-IDF bug is resolved)