This driver is my first experiment in C# and with the ASCOM platofrm.
Anyway, this driver is able to read the data provided by your EcoWitt weather station and pass the data to ASCOM platform.
Actually I test it only with the WS90 weather station reading the data from the GW2001 hub.
In theory is complatible with all the EcoWitt weather stations made by EcoWitt that can connect to the WiFi.
Start the installation, and click next everytime
Open your preferite software, I use N.I.N.A., when you need to choose the driver open the setup page:
Add the IP address of your weather station (best if you give a static IP to the weather station), and click Test!
If everything is good this message will appear:
Click Ok, and save the data pressing again Ok.
If you have some problems and you want to help me to investigate, check TraceOn as in the image.
Since everyone got it's own wifi, I added a time out selection (default is 5 minutes), if the driver can't reach the weather station after that time will close the connection with the software.
Connect the equipment et voilà:
