CICE POWER 4.1
ESP32 Basic Project (KiCad)
A basic ESP32 hardware project designed using KiCad. This repository contains the schematic and PCB layout files for an ESP32-based setup, intended for learning, experimentation, and future expansion.
📌 Project Overview
This project focuses on:
Understanding ESP32 pin mapping
Creating a clean schematic
Designing a basic PCB layout in KiCad
Laying groundwork for firmware-based ESP32 projects
No unnecessary complexity. Just the essentials done right.
🛠 Tools & Software
KiCad (v6 or later recommended)
ESP32 module (e.g., ESP32-WROOM-32)
Basic understanding of schematics & PCB design
/kicad/ ├── schematic.sch ├── pcb_layout.kicad_pcb └── project.kicad_pro
🔌 Hardware Features
ESP32 microcontroller
Power input section
Basic pin breakout for GPIO access
Designed for easy modification and upgrades
🚀 How to Use
Clone the repository:
git clone https://github.com/Tech4Aditya/esp32.git
Open the project in KiCad
Review the schematic
Inspect or modify the PCB layout
Export Gerber files if you plan to manufacture
This is a basic-level project
Not optimized for production use
Always double-check power and pin connections before fabrication
📈 Future Improvements
Add USB-to-UART circuit
Voltage regulation improvements
On-board sensors or peripherals
Firmware examples (Arduino / ESP-IDF)
📜 License
This project is open-source. Use it, modify it, break it, learn from it.