This repository contains the firmware for ESP32 that allows it to communicate with the LampControl Android application. It enables the ESP32 to act as a bridge between the app and your lighting system.
For additional features and a user-friendly interface, use the LampControl Android App. The app provides an intuitive way to control your LED lamp and can be found in the following repository: LampControl Android App
To install the firmware on your ESP32:
- Clone the repository using: git clone https://github.com/TraineeBeba/LampControl-ESP-32.git
- Open the project in your Platform IO IDE.
- Connect the ESP32 to your computer.
- Compile and upload the firmware to the ESP32.
D2 (GPIO2)
D4 (GPIO4)
Once the firmware is installed and the ESP32 device is turnes on - the Android app will discover ESP32 device, allowing you to control the lighting system through the app.
- One Tap: Change brightness (4 cyclic levels)
- Double Tap: Change mode (3 cyclic modes)
- 3 Sec Hold: Turn the LED lamp on/off