CURA-12361 add skin support

CMakeLists.txt

@@ -43,7 +43,6 @@ endif ()
 
 set(engine_SRCS # Except main.cpp.
         src/Application.cpp
-        src/bridge.cpp
         src/ConicalOverhang.cpp
         src/ExtruderPlan.cpp
         src/ExtruderTrain.cpp
@@ -99,6 +98,12 @@ set(engine_SRCS # Except main.cpp.
         src/BeadingStrategy/WideningBeadingStrategy.cpp
         src/BeadingStrategy/OuterWallInsetBeadingStrategy.cpp
 
+        src/bridge/bridge.cpp
+        src/bridge/ExpansionRange.cpp
+        src/bridge/SegmentOverlappingData.cpp
+        src/bridge/TransformedSegment.cpp
+        src/bridge/TransformedShape.cpp
+
         src/communication/ArcusCommunication.cpp
         src/communication/ArcusCommunicationPrivate.cpp
         src/communication/CommandLine.cpp

include/ExtruderPlan.h

@@ -42,7 +42,7 @@ class ExtruderPlan
     FRIEND_TEST(ExtruderPlanPathsParameterizedTest, BackPressureCompensationFull);
     FRIEND_TEST(ExtruderPlanPathsParameterizedTest, BackPressureCompensationHalf);
     FRIEND_TEST(ExtruderPlanTest, BackPressureCompensationEmptyPlan);
-    friend class FffGcodeWriterTest_SurfaceGetsExtraInfillLinesUnderIt_Test;
+    friend class DISABLED_FffGcodeWriterTest_SurfaceGetsExtraInfillLinesUnderIt_Test;
 #endif
 public:
     size_t extruder_nr_{ 0 }; //!< The extruder used for this paths in the current plan.

include/FffGcodeWriter.h

@@ -39,7 +39,7 @@ struct MeshPathConfigs;
 class FffGcodeWriter : public NoCopy
 {
     friend class FffProcessor; // Because FffProcessor exposes finalize (TODO)
-    friend class FffGcodeWriterTest_SurfaceGetsExtraInfillLinesUnderIt_Test;
+    friend class DISABLED_FffGcodeWriterTest_SurfaceGetsExtraInfillLinesUnderIt_Test;
 
 private:
     coord_t max_object_height; //!< The maximal height of all previously sliced meshgroups, used to avoid collision when moving to the next meshgroup to print.
@@ -749,9 +749,8 @@ class FffGcodeWriter : public NoCopy
      * \param mesh the mesh containing the layer of interest
      * \param part \param part The part for which to create gcode
      * \param infill_line_width line width of the infill
-     * \return true if there needs to be a skin edge support wall in this layer, otherwise false
      */
-    static bool partitionInfillBySkinAbove(
+    static void partitionInfillBySkinAbove(
         Shape& infill_below_skin,
         Shape& infill_not_below_skin,
         const LayerPlan& gcode_layer,

include/LayerPlan.h

@@ -57,7 +57,7 @@ class LayerPlan : public NoCopy
     friend class LayerPlanBuffer;
 #ifdef BUILD_TESTS
     friend class AddTravelTest;
-    friend class FffGcodeWriterTest_SurfaceGetsExtraInfillLinesUnderIt_Test;
+    friend class DISABLED_FffGcodeWriterTest_SurfaceGetsExtraInfillLinesUnderIt_Test;
     friend class AntiOozeAmountsTest;
     FRIEND_TEST(AntiOozeAmountsTest, ComputeAntiOozeAmounts);
 #endif
@@ -167,6 +167,8 @@ class LayerPlan : public NoCopy
 
     bool min_layer_time_used = false; //!< Wether or not the minimum layer time (cool_min_layer_time) was actually used in this layerplan.
 
+    std::map<const SliceMeshStorage*, MixedLinesSet> infill_lines_; //!< Infill lines generated for this layer
+
     const std::vector<FanSpeedLayerTimeSettings> fan_speed_layer_time_settings_per_extruder_;
 
     enum CombBoundary
@@ -417,6 +419,10 @@ class LayerPlan : public NoCopy
      */
     void planPrime(double prime_blob_wipe_length = 10.0);
 
+    void setGeneratedInfillLines(const SliceMeshStorage* mesh, const MixedLinesSet& infill_lines);
+
+    const MixedLinesSet getGeneratedInfillLines(const SliceMeshStorage* mesh) const;
+
     /*!
      * Add an extrusion move to a certain point, optionally with a different flow than the one in the \p config.
      *

include/LayerPlanBuffer.h

@@ -4,6 +4,7 @@
 #ifndef LAYER_PLAN_BUFFER_H
 #define LAYER_PLAN_BUFFER_H
 
+#include <condition_variable>
 #include <list>
 #include <vector>
 
@@ -17,6 +18,7 @@ namespace cura
 class LayerPlan;
 class ExtruderPlan;
 class GCodeExport;
+struct LayerIndex;
 
 /*!
  * Class for buffering multiple layer plans (\ref LayerPlan) / extruder plans within those layer plans, so that temperature commands can be inserted in earlier layer plans.
@@ -57,6 +59,9 @@ class LayerPlanBuffer
      */
     std::list<LayerPlan*> buffer_;
 
+    std::mutex buffer_mutex_;
+    std::condition_variable buffer_condition_variable_;
+
 public:
     LayerPlanBuffer(GCodeExport& gcode)
         : gcode_(gcode)
@@ -66,11 +71,6 @@ class LayerPlanBuffer
 
     void setPreheatConfig();
 
-    /*!
-     * Push a new layer plan into the buffer
-     */
-    void push(LayerPlan& layer_plan);
-
     /*!
      * Push a new layer onto the buffer and handle the buffer.
      * Write a layer to gcode if it is popped out of the buffer.
@@ -85,6 +85,15 @@ class LayerPlanBuffer
      */
     void flush();
 
+    /*!
+     * Gets the layer plan for the given layer, once it has been completed. It will wait for completion if necessary
+     * @param layer_nr The layer number to get the plan for
+     * @return The completed layer plan
+     * @warning Make sure you always ask for a layer plan below the one that is being processed. Since the layers processing is started bottom to top and the engine can be run
+     *          mono-threaded, asking for a layer above could lead to a deadlock because the processing of this layer will never start.
+     */
+    const LayerPlan* getCompletedLayerPlan(const LayerIndex& layer_nr) const;
+
 private:
     /*!
      * Process all layers in the buffer

include/TreeModelVolumes.h

@@ -19,7 +19,6 @@
 
 namespace cura
 {
-constexpr coord_t EPSILON = 5;
 constexpr coord_t FUDGE_LENGTH = 50;
 
 class SliceDataStorage;