This project is a Qt 6 implementation of the 3D Printer UI Demo originally designed by SquareLine Studio. The goal of this project is to recreate the demo using only Qt 6 QML, without relying on any external resources. This project was created to explore Qt 6's capabilities in replicating complex and visually appealing UIs. It serves as a learning resource.
The original UI concept and design are the creative work of SquareLine Studio. This project is a technical implementation of their design, intended for educational and demonstration purposes. All credit for the visual design and user experience goes to SquareLine Studio.
This project is not affiliated with or endorsed by SquareLine Studio. It is an independent implementation of their UI design, created solely for educational purposes.
Open the project in QtCreator and build it using a Qt version >= Qt.6.5.2
To cross-compile Qt on Debian Bookworm I followed the guides:
https://wiki.qt.io/Cross-Compile_Qt_6_for_Raspberry_Pi
https://doc.qt.io/qt-6/configure-linux-device.html
For the configuration I used the following:
~/Downloads/qt-everywhere-src-6.5.3/configure -release -opengl es2 -egl -nomake examples -nomake tests -skip qtwebengine -skip qtwebview -skip qtquick3dphysics -skip qtlottie -skip qtcharts -skip qtpositioning -skip qtspeech -skip qt3d -skip qtdatavis3d -skip qtquick3d -skip qtmqtt -skip qtnetworkauth -skip qtwayland -skip qtlocation -skip qtlanguageserver -skip qtquickeffectmaker -skip qtquicktimeline -skip qtdoc -skip qttranslations -skip qttools -qt-host-path /opt/Qt/6.5.3/gcc_64 -extprefix $HOME/DEV/qt-raspi/6.5.3/aarch64 -prefix /usr/local/qt6/6.5.3 -device linux-rasp-pi4-aarch64 -device-option CROSS_COMPILE=aarch64-linux-gnu- -- -DCMAKE_TOOLCHAIN_FILE=$HOME/DEV/toolchain.cmake -DQT_FEATURE_xcb=ON -DFEATURE_xcb_xlib=ON -DQT_FEATURE_xlib=ON -DQT_FEATURE_dbus=OFF -Wno-dev
The toolchain.cmake file was the one from the guide updated for my machine.
After cross compilation I used Qt creator to launch the application , whith this "Run" environment :
LD_LIBRARY_PATH=/usr/local/qt6/6.5.3/lib
QT_PLUGIN_PATH=/usr/local/qt6/6.5.3/plugins
QT_QPA_PLATFORM_PLUGIN_PATH=/usr/local/qt6/6.5.3/plugins
QT_QPA_PLATFORM=eglfs
DISPLAY=:0
QT_OPENGL=es2
QT_QPA_EGLFS_OPENGL=1
QT_QPA_EGLFS_WIDTH=800
QT_QPA_EGLFS_HEIGHT=480
QT_QPA_EGLFS_HIDECURSOR=1
The project was tested on a Raspberry Pi Zero 2 with a 5 inch Display-h with capacitive touch
VID_20250325_124850.mp4
The project was also tested on a Raspberry Pi Zero 2 with a Waveshare 3.5 inch touch resistive display
