This project uses an Arduino microcontroller and a gyroscope sensor to control an LED light. When the gyroscope moves to the right, the LED light will glow, and when it moves to the left, the LED light will turn off.
Getting Started
To get started with this project, you will need the following components:
Arduino microcontroller
Gyroscope sensor
LED light
Breadboard
Jumper wires
Once you have gathered all of the necessary components, you can start building your circuit. Connect the gyroscope sensor and LED light to the Arduino using the jumper wires and breadboard.
Installing the Code
Next, you will need to install the code on your Arduino microcontroller. The code for this project is available in the code.ino file. Open the Arduino IDE and upload the code to your microcontroller.
Testing the Project
With the code uploaded to the microcontroller, you can now test the project. Move the gyroscope to the right, and the LED light should glow. Move the gyroscope to the left, and the LED light should turn off.
Contributing
If you want to contribute to this project, feel free to fork the repository and submit a pull request. We welcome contributions from the community and appreciate your help in improving the project.
License
This project is licensed under the MIT License - see the LICENSE file for details.