This Marlin configuration is intended for use with the following hardware:
- Creality Ender 3
- BIGTREETECH SKR Mini E3 V2.0 control board
- BLTouch 2.0 attached to the Z-Probe header (NOT the Z-Stop header)
The probe offsets are configured for this BLTouch mount.
While the default offsets work fine for my unit, you may need to tweak
NOZZLE_TO_PROBE_OFFSET to get it to work with your printer.
This configuration should be similar to the firmware-bltouch.bin image
provided by BIGTREETECH in their own repo.