sunxi-6.13: Add all patches

config/kernel/linux-sunxi64-edge.config

@@ -2383,6 +2383,7 @@ CONFIG_ARM_MHU_V2=m
 CONFIG_SUN50I_IOMMU=y
 CONFIG_ARM_SMMU=y
 CONFIG_LITEX_SOC_CONTROLLER=m
+CONFIG_SUN50I_H6_PRCM_PPU=m
 CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
 CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y

config/sources/families/include/sunxi64_common.inc

@@ -35,8 +35,8 @@ case $BRANCH in
 		;;
 
 	edge)
-		declare -g KERNEL_MAJOR_MINOR="6.12" # Major and minor versions of this kernel.
-		declare -g KERNELBRANCH="tag:v6.12.16"
+		declare -g KERNEL_MAJOR_MINOR="6.13" # Major and minor versions of this kernel.
+		declare -g KERNELBRANCH="tag:v6.13.7"
 		;;
 esac
 

config/sources/families/include/sunxi_common.inc

@@ -36,8 +36,8 @@ case $BRANCH in
 		;;
 
 	edge)
-		declare -g KERNEL_MAJOR_MINOR="6.12" # Major and minor versions of this kernel.
-		declare -g KERNELBRANCH="tag:v6.12.16"
+		declare -g KERNEL_MAJOR_MINOR="6.13" # Major and minor versions of this kernel.
+		declare -g KERNELBRANCH="tag:v6.13.7"
 		;;
 esac
 

patch/kernel/archive/sunxi-6.13/patches.armbian/ARM-dts-sun8i-nanopiduo2-Use-key-0-as-power-button.patch

@@ -0,0 +1,31 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Gunjan Gupta <[email protected]>
+Date: Mon, 26 Jun 2023 13:29:46 +0000
+Subject: ARM: dts: sun8i: nanopiduo2: Use key-0 as power button
+
+The onboard button key-0 was not marked as power button. This meant
+that once the board was suspended, there was no way to bring it back
+to life. Mark key-0 as power button so that it can be used to bring
+the board back to life
+---
+ arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
+index 111111111111..222222222222 100644
+--- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
++++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
+@@ -42,8 +42,9 @@ gpio-keys {
+
+ 		key-0 {
+ 			label = "k1";
+-			linux,code = <BTN_0>;
++			linux,code = <KEY_POWER>;
+ 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
++			wakeup-source;
+ 		};
+ 	};
+
+-- 
+Armbian
+

patch/kernel/archive/sunxi-6.13/patches.armbian/ARM-dts-sun8i-nanopiduo2-enable-ethernet.patch

@@ -0,0 +1,31 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Gunjan Gupta <[email protected]>
+Date: Mon, 26 Jun 2023 13:53:14 +0000
+Subject: ARM: dts: sun8i: nanopiduo2: enable ethernet
+
+NanoPi Duo2 has pinout for ethernet. Lets enable the same in dts
+---
+ arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
+index 111111111111..222222222222 100644
+--- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
++++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
+@@ -105,6 +105,13 @@ &ehci0 {
+ 	status = "okay";
+ };
+
++&emac {
++	phy-handle = <&int_mii_phy>;
++	phy-mode = "mii";
++	allwinner,leds-active-low;
++	status = "okay";
++};
++
+ &mmc0 {
+ 	bus-width = <4>;
+ 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+-- 
+Armbian
+

patch/kernel/archive/sunxi-6.13/patches.armbian/ARM64-dts-sun50i-h616-BigTreeTech-CB1-Enable-EMAC1.patch

@@ -0,0 +1,42 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: JohnTheCoolingFan <[email protected]>
+Date: Thu, 13 Jun 2024 11:50:55 +0000
+Subject: ARM64: dts: sun50i-h616: BigTreeTech CB1: Enable EMAC1
+
+Signed-off-by: JohnTheCoolingFan <[email protected]>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi | 18 ++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+index 111111111111..222222222222 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+@@ -149,6 +149,24 @@ &cpu0 {
+ 	cpu-supply = <&reg_dcdc2>;
+ };
+
++&emac1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&rmii_pins>;
++	phy-mode = "rmii";
++	phy-handle = <&rmii_phy>;
++	phy-supply = <&reg_dldo1>;
++	allwinner,rx-delay-ps = <3100>;
++	allwinner,tx-delay-ps = <700>;
++	status = "okay";
++};
++
++&mdio1 {
++	rmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++	};
++};
++
+ &mmc0 {
+ 	vmmc-supply = <&reg_dldo1>;
+ 	broken-cd;
+-- 
+Armbian
+

patch/kernel/archive/sunxi-6.13/patches.armbian/ARM64-dts-sun50i-h616-BigTreeTech-CB1-Enable-HDMI.patch

@@ -0,0 +1,57 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: JohnTheCoolingFan <[email protected]>
+Date: Thu, 13 Jun 2024 11:07:35 +0000
+Subject: ARM64: dts: sun50i-h616: BigTreeTech CB1: Enable HDMI
+
+Signed-off-by: JohnTheCoolingFan <[email protected]>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi | 26 ++++++++++
+ 1 file changed, 26 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+index 111111111111..222222222222 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+@@ -26,6 +26,17 @@ chosen {
+ 		stdout-path = "serial0:115200n8";
+ 	};
+
++	connector {
++		compatible = "hdmi-connector";
++		type = "d";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+
+@@ -262,6 +273,21 @@ reg_dldo1: dldo1 {
+ 	};
+ };
+
++&de {
++	status = "okay";
++};
++
++&hdmi {
++	hvcc-supply = <&reg_aldo1>;
++	status = "okay";
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
+ &cpu0 {
+ 	cpu-supply = <&reg_dcdc2>;
+ 	status = "okay";
+-- 
+Armbian
+