ONVIF Discovery CLI Tool

A Golang-based command-line tool to discover ONVIF devices on the network. It lists all available network interfaces, allows the user to select one, and scans for ONVIF devices broadcasting on the selected interface.

Features

• Lists all network interfaces on the system.
• Allows the user to select a specific interface for scanning.
• Outputs discovered ONVIF device streaming URLs in the format: http://<IP>:<Port>.

Prerequisites

• Tested on: Linux (Debian-based distributions)
• Go 1.18 or later
• A network with ONVIF-compatible devices

Installation

1. Clone the repository:

   https://github.com/asherAbecasiss/OnvifDiscover.git
   cd OnvifDiscover
   go build .
   

2. Run the tool.

   ./OnvifDiscover
   

Follow the prompts

• Select the desired network interface by entering its corresponding number.
• The tool will scan for ONVIF devices and display the discovered URLs.

Example Output

Available network interfaces:
 [0] enp4s0 (Flags: up|broadcast|multicast)
 [1] enp0 (Flags: up|broadcast|multicast|loopback)
 Select an interface (enter the number): 0
 Selected interface: enp4s0
 Discovered ONVIF streaming URLs:
 http://192.168.1.10:8080/onvif/device_service
 http://192.168.1.11:8080/onvif/device_service