D6 Fitness Tracker Arduino Core for Nordic Semiconductor nRF5 based boards

This core is edited for the D6 Fitness Tracker, it is original from here https://github.com/sandeepmistry/arduino-nRF5

This is the Installable version of the Portable version shown in this Video: (Click on the Picture to watch the Video)

After installation the Core works as in the Video

Here is the D6Flasher on Google Play-store with the Flasher it is Possible to flash the Created firmware over the air, please view the Youtube Video.

You can buy the Tracker on Gearbest for as Cheap as 5$ https://www.gearbest.com/smart-watches/pp_1232618.html?wid=1433363&lkid=52058797 Coupon: GB0722MPOW

Installing

Board Manager

Download and install the Arduino IDE (At least v1.6.12)
Start the Arduino IDE
Go into Preferences
Add https://atc1441.github.io/D6Library/package_nRF5_boards_index.json as an "Additional Board Manager URL"
Open the Boards Manager from the Tools -> Board menu and install "D6 Tracker by ATC1441"
Select the DSD6 Tracker board from the Tools -> Board menu
You will find the DFU update file in a folder like this on windows. C:\Users\USERNAME\AppData\Local\Temp\arduino_build_RANDOM\SKETCHNAME.ino.zip

NOTE: During installation it takes the Arduino IDE a few minutes to extract the tools after they have been downloaded, please be patient.

Adafruit's nrfutil tools

adafruit-nrfutil (derived from Nordic pc-nrfutil) is needed to upload sketch via serial port.

For Windows and macOS, pre-built executable binaries are included in the BSP at tools/adafruit-nrfutil/. It should work out of the box.
Linux user need to run follow command to install it from PyPi
```
$ pip3 install adafruit-nrfutil --user
```

Driver Setup for St-Link

Download Zadig
Plugin St-Link board
Start Zadig
Select Options -> List All Devices
Plug and unplug your device to find what changes, and select the St-Link from the device dropdown
Click Replace Driver / Install Driver

NOTE: To roll back to the original driver go to: Device Manager -> Right click on device -> Check box for "Delete the driver software for this device" and click Uninstall

Pinout, Flashfiles and Espruino Version

Here Fanoush made much work in the Espruino direction with the Pinout and Flash Backup files.

Credits

Copy from the Sandeepmistry core and edited to make D6 Fitness Tracker Compatible.

This core is based on the Arduino SAMD Core and licensed under the same LGPL License

Nrfutil taken from Adafruit nRF52 Library

The following tools are used:

GCC ARM Embedded as the compiler
A forked version of OpenOCD to flash sketches

License

atc1441/D6-arduino-nRF5

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 5

Packages 0

Languages

Error
Looks like something went wrong!

Packages