Add SIMPLIFLYF405

configs/SIMPLIFLYF405/config.h

@@ -0,0 +1,124 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32F405
+
+#define BOARD_NAME        SIMPLIFLYF405
+#define MANUFACTURER_ID   SFLY
+
+#define USE_GYRO
+#define USE_ACC
+#define USE_GYRO_SPI_ICM42688P
+#define USE_ACC_SPI_ICM42688P
+#define USE_BARO
+#define USE_BARO_BMP280
+#define USE_MAX7456
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+
+#define BEEPER_INVERTED
+#define BEEPER_PIN           PB1
+
+#define MOTOR1_PIN           PC6
+#define MOTOR2_PIN           PC7
+#define MOTOR3_PIN           PC8
+#define MOTOR4_PIN           PC9
+
+#define RX_PPM_PIN           PA1
+
+#define LED_STRIP_PIN        PB6
+
+#define UART1_TX_PIN         PA9
+#define UART2_TX_PIN         PA2
+#define UART3_TX_PIN         PB10
+#define UART4_TX_PIN         PA0
+#define UART5_TX_PIN         PC12
+#define UART1_RX_PIN         PA10
+#define UART2_RX_PIN         PA3
+#define UART3_RX_PIN         PB11
+#define UART4_RX_PIN         PA1
+#define UART5_RX_PIN         PD2
+
+// I2C1 for Mag/Baro
+#define I2C1_SCL_PIN         PB8
+#define I2C1_SDA_PIN         PB9
+#define MAG_I2C_INSTANCE     I2CDEV_1
+#define BARO_I2C_INSTANCE    I2CDEV_1
+
+#define LED0_PIN             PB0
+
+// SPI1 for Gyro/Acc
+#define SPI1_SCK_PIN         PA5
+#define SPI1_SDI_PIN         PA6
+#define SPI1_SDO_PIN         PA7
+#define GYRO_1_EXTI_PIN      PC5
+#define GYRO_1_CS_PIN        PC4
+#define GYRO_1_SPI_INSTANCE  SPI1
+#define GYRO_1_ALIGN         CW270_DEG_FLIP
+#define USE_GYRO_CLKIN
+#define GYRO_1_CLKIN_PIN     PA8
+
+// SPI2 for Max7456 OSD
+#define SPI2_SCK_PIN         PB13
+#define SPI2_SDI_PIN         PB14
+#define SPI2_SDO_PIN         PB15
+#define MAX7456_SPI_CS_PIN   PB12
+#define MAX7456_SPI_INSTANCE SPI2
+
+// SPI3 for Flash
+#define SPI3_SCK_PIN         PC10
+#define SPI3_SDI_PIN         PC11
+#define SPI3_SDO_PIN         PB5
+#define FLASH_CS_PIN         PB7
+#define FLASH_SPI_INSTANCE   SPI3
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+
+#define CAMERA_CONTROL_PIN   PB3
+
+#define ADC_VBAT_PIN         PC2
+#define ADC_RSSI_PIN         PC0
+#define ADC_CURR_PIN         PC1
+
+// PinIO
+#define PINIO1_PIN           PB2
+#define PINIO1_CONFIG        129
+#define PINIO1_BOX           40
+#define BOX_USER1_NAME       "9V BEC"
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP( 0, MOTOR1_PIN , 2,  1 ) \
+    TIMER_PIN_MAP( 1, MOTOR2_PIN , 2,  1 ) \
+    TIMER_PIN_MAP( 2, MOTOR3_PIN , 2,  1 ) \
+    TIMER_PIN_MAP( 3, MOTOR4_PIN , 2,  0 ) \
+    TIMER_PIN_MAP( 4, LED_STRIP_PIN , 1,  0 ) \
+    TIMER_PIN_MAP( 5, CAMERA_CONTROL_PIN , 1, -1 ) \
+    TIMER_PIN_MAP( 6, RX_PPM_PIN , 2, -1 ) \
+    TIMER_PIN_MAP( 7, BEEPER_PIN , 1, -1 )  \
+    TIMER_PIN_MAP( 8, GYRO_1_CLKIN_PIN , 1, -1 ) 
+
+#define ADC_INSTANCE         ADC3
+#define ADC3_DMA_OPT         1
+
+#define SYSTEM_HSE_MHZ 8
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC