Config File
You can install the scripts as usual.
❗ Note: There is currently no support for Alpine Linux.
Use our scripts from the development or main repo.
After starting the script, select:
4 Use Config File
Create a config file on your PVE Host before running the scripts.
Default path: /opt/community-scripts/.settings
You may change this path during the script prompt.
If any values are missing in your config file, the script will fall back to default settings.
Caution
Input validation is limited. Incorrect values may break the script.
| Name | Value |
|---|---|
CT_ID |
LXC ID (single number or range e.g. 100-9999) |
CT_TYPE |
1 = unprivileged, 0 = privileged |
PW |
Root password |
HN |
Container hostname |
DISK_SIZE |
Disk size in GB |
CORE_COUNT |
Number of CPU cores |
RAM_SIZE |
RAM size in MiB |
BRG |
Bridge name (e.g., vmbr0) |
NET |
IP address/CIDR (e.g., 192.168.0.1/24) |
GATE |
Gateway IP (e.g., 192.168.0.254) |
APT_CACHER_IP |
APT-cacher IP (e.g., 192.168.0.2) |
DISABLEIP6 |
yes or no
|
MTU |
Network MTU (e.g., 1500) |
SD |
Search domain (e.g., example.com) |
NS |
DNS server IP (e.g., 192.168.0.100) |
MAC |
MAC address |
VLAN |
VLAN ID (e.g., 100) |
TAGS |
Custom tags (semicolon-separated) |
SSH |
yes or no
|
SSH_AUTHORIZED_KEY |
Public SSH key |
VERB |
Verbose mode: yes or no
|
Each value must be wrapped in double quotes:
DISK_SIZE="25"
CORE_COUNT="33"
RAM_SIZE="4500"
HN="TEST"
BRG="vmbr1"
NET="10.10.10.171/24"
GATE="10.10.10.254"
VLAN="100"
SSH="yes"
TAGS="dev;testing"
SSH_AUTHORIZED_KEY="REDACTED"