eTron's Weather Cards

Wide and Tall use the same sensors. eTrons-WideWeatherCard-DateConditions uses the same sensors + 2 more for current conditions & AQI category. Also shows the date above the time.

📋 Prerequisites

This card is configured to use Google Weather and Google AQI for sensor data by default.

1. Navigate to Settings > Devices & Services in Home Assistant.
2. Click Add Integration.
3. Search for and install both Google Weather and Google AQI.

Note: You can use other weather providers, but you must ensure the three (or 5 for eTrons-WideWeatherCard-DateConditions) required sensor entities (Humidity, AQI, and UV, AQI Category, Current Conditions) are correctly defined in the card variables. If these are missing, the card will display an error.

⚙️ Installation

1. Setup Icons

1. Create a folder named weather-icons inside your Home Assistant www directory (e.g., /config/www/weather-icons).
2. Extract the contents of the provided ZIP file into this folder.

• Important: Do not rename any of the files. The card relies on these specific filenames to match weather states.

2. Create the Card

Once the prerequisites and icons are set up, you can add the card to your dashboard.

1. Enter dashboard edit mode and Add Card.
2. Select Manual.
3. Paste the desired YAML code and Save.

3. Add this sensor to configuration.yaml under the sensors section. (you need to fix the spacing / indentation)

sensor:

- platform: time_date

display_options:

- 'time'

4. DO NOT FORGET TO ADD THE ADDITIONAL CONFIGURATION.YAML CODE FROM THE OTHER FILE. This is in addition to the sensor above.

⚠️ Critical Step: You must do the following or the time and sensor images may not appear:

1. Restart Home Assistant to ensure the new folder is recognized.
2. Clear your browser cache (and the cache of the Home Assistant Companion App if using mobile) to force the new images to load.