Skip to content

v2.20

Choose a tag to compare

View all tags
@github-actions github-actions released this 18 May 16:49
v2.20
5700e1c

2.20 (2025-05-18)

Added

  • Direct frequency input mode. Press and rotate the encoder to select the step (digit or "half-digit"), rotate the encoder to adjust the frequency, use short press to align frequency to the current step. To exit the mode, click the encoder or wait for a couple of seconds. #26
  • Settings->UTC Offset now affects the displayed time (whether it was received from RDS or NTP). #44
  • Settings->Scroll Dir. option to reverse the menu scroll direction. #79
  • Add SNR to the serial console log.
  • Stop the automatic seek process by clicking the encoder button (exit by rotating it still works).
  • Use press+rotate for manual fine tuning in Seek mode.
  • Wi-Fi mode to sync time over NTP, view the receiver status and Memory slots.

Changed

  • Experimental: re-enable automatic antenna capacitor on FM, MW and 160M bands (as it was in 1.06 and earlier), plus reset it when switching between AM bands. #13
  • The short press (volume) shortcut is no longer global (now works only in VFO mode) and can be used by menus and other modal modes. #26
  • SSB tuning is now aligned to the current step. #76
  • Completely silence speaker output on mute. #78
  • Decrease RSSI & SNR thresholds in FM/AM seek modes.
  • Theme editor can be enabled or disabled via the T terminal command, without recompiling the firmware.

Fixed

  • Set seek step according to the current step. #5
  • SSB memory slots now store frequencies with 100Hz precision. Serial commands that work with memory slots now expect frequencies in Hz. #79
  • Fixed wrong menu titles. #80
  • Fix audible clicks when scrolling over empty memory slots.

Improved Documentation

Assets 3
Loading