3D-Models

• Use the the "small-plate" version for build plates under 250x250mm

• All versions have to printed and tested on a Bambulabs P1S using standard PLA filament.

• White or lighter color filament will diffuse the light best.

• 1 or 2 LED Pixels may need to be trimmed from the far end ->

• Slicer settings - 0.2 Layer height, 15% infill "Grid", 5mm Outer brim for adhesion.

BOM

• WLED Controller
• Side Emitting LED Strip - 5mm 72LEDs-M - 1m
• 5v Power Supply

Preset Config for Power on/off and Preset Scroll with physical button

Power Toggle

1. From WLED App click "Presets"
2. Click "+ Preset"
3. Name preset "Power"
4. Uncheck "Use current state"
5. Paste into "API command" T=2
6. "Save to ID" 250
7. Click "Save"

Scroll Presets

1. From WLED App click "Presets"
2. Click "+ Preset"
3. Name preset "Scroll Preset"
4. Uncheck "Use current state"
5. Paste into "API command" win&P1=1&P2=3PL=~ (Replace values of P1 and P2 with the first and last Present IDs that you want to scroll through)
6. "Save to ID" 249
7. Click "Save"

Configure Button

1. From WLED App click "Config"
2. Click "Time & Macros"
3. Scroll down to "Button Actions"
4. For "Button 0" enter value 249 for "short on->off"
5. For "Button 0" enter value 250 for "long on->off"
6. Click "Save"