JDCloud-AX6000-Baili-hanwckf #2
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # Copyright (c) 2019-2020 P3TERX <https://p3terx.com> | |
| # | |
| # This is free software, licensed under the MIT License. | |
| # See /LICENSE for more information. | |
| # | |
| # https://github.com/P3TERX/Actions-OpenWrt | |
| # Description: Build OpenWrt using GitHub Actions | |
| # | |
| ###############手动修改############## | |
| name: JDCloud-AX6000-Baili-hanwckf | |
| on: | |
| repository_dispatch: | |
| workflow_dispatch: | |
| inputs: | |
| LAN_IP: | |
| description: 'Set LAN IP Address' | |
| required: true | |
| default: '192.168.1.1' | |
| WIFI_DRIVER: | |
| description: 'Choose WiFi Driver' | |
| required: true | |
| default: 'v7.6.7.2-fw-20240823(recommend)' | |
| type: choice | |
| options: | |
| - v7.6.7.2-fw-20240823(recommend) | |
| - v7.6.6.1-fw-20230808(recommend) | |
| - v7.6.7.2-fw-default | |
| - v7.6.7.2-fw-20221208 | |
| - v7.6.7.2-fw-20230421 | |
| - v7.6.7.2-fw-20230808 | |
| - v7.6.7.2-fw-20231024 | |
| - v7.6.6.1-fw-default | |
| - v7.6.6.1-fw-20221208 | |
| - v7.6.6.1-fw-20230421 | |
| - v7.6.6.1-fw-20231024 | |
| - v7.6.6.1-fw-20240823 | |
| SW_DRIVER: | |
| description: 'Choose Switch Driver' | |
| required: true | |
| default: 'GSW' | |
| type: choice | |
| options: | |
| - GSW | |
| - DSA | |
| APP_MTK: | |
| description: 'Use luci-app-mtk wifi config' | |
| required: true | |
| default: false | |
| type: boolean | |
| NO_DOCKERMAN: | |
| description: 'Not build luci-app-dockerman' | |
| required: true | |
| default: false | |
| type: boolean | |
| ssh: | |
| description: 'SSH connection to Actions' | |
| required: false | |
| default: 'false' | |
| # schedule: | |
| # - cron: 0 16 * * * | |
| env: | |
| ###############手动修改############## | |
| OPENWRT_NAME: hanwckf | |
| REPO_URL: https://github.com/hanwckf/immortalwrt-mt798x | |
| REPO_BRANCH: openwrt-21.02 | |
| FEEDS_CONF: JDCloud-AX6000-Baili-hanwckf/feeds.conf.default | |
| CONFIG_FILE: JDCloud-AX6000-Baili-hanwckf/.mtwifi-cfg.config | |
| DIY_P1_SH: JDCloud-AX6000-Baili-hanwckf/diy-part1.sh | |
| DIY_P2_SH: JDCloud-AX6000-Baili-hanwckf/diy-part2.sh | |
| SSH_ACTIONS: false | |
| UPLOAD_FIRMWARE: true | |
| UPLOAD_RELEASE: true | |
| TZ: Asia/Shanghai | |
| jobs: | |
| build: | |
| runs-on: ubuntu-20.04 | |
| permissions: | |
| contents: write | |
| steps: | |
| - name: 检查项目分支 | |
| uses: actions/checkout@main | |
| - name: 初始化编译环境 | |
| env: | |
| DEBIAN_FRONTEND: noninteractive | |
| run: | | |
| sudo rm -rf /etc/apt/sources.list.d/* /usr/share/dotnet /usr/local/lib/android /opt/ghc | |
| sudo -E apt-get -qq update | |
| sudo -E apt-get -qq install $(curl -fsSL git.io/depends-ubuntu-2004) | |
| sudo -E apt-get -qq autoremove --purge | |
| sudo -E apt-get -qq clean | |
| sudo timedatectl set-timezone "$TZ" | |
| sudo mkdir -p /workdir | |
| sudo chown $USER:$GROUPS /workdir | |
| - name: 清理磁盘空间(Ubuntu) | |
| uses: jlumbroso/free-disk-space@main | |
| with: | |
| # this might remove tools that are actually needed, | |
| # when set to "true" but frees about 6 GB | |
| tool-cache: true | |
| # all of these default to true, but feel free to set to | |
| # "false" if necessary for your workflow | |
| android: false | |
| dotnet: false | |
| haskell: false | |
| large-packages: false | |
| swap-storage: false | |
| - name: 下载固件源码 | |
| working-directory: /workdir | |
| run: | | |
| df -hT $PWD | |
| git clone $REPO_URL -b $REPO_BRANCH openwrt | |
| ln -sf /workdir/openwrt $GITHUB_WORKSPACE/openwrt | |
| - name: 加载feeds.conf.default & DIY_P1_SH | |
| run: | | |
| [ -e $FEEDS_CONF ] && mv $FEEDS_CONF openwrt/feeds.conf.default | |
| chmod +x $DIY_P1_SH | |
| cd openwrt | |
| $GITHUB_WORKSPACE/$DIY_P1_SH | |
| - name: 更新 & 安装 feeds | |
| run: | | |
| cd openwrt | |
| ./scripts/feeds update -a | |
| ./scripts/feeds install -a | |
| - name: 加载config & DIY_P2_SH | |
| run: | | |
| [ -e $CONFIG_FILE ] && mv $CONFIG_FILE openwrt/.config | |
| chmod +x $DIY_P2_SH | |
| cd openwrt | |
| $GITHUB_WORKSPACE/$DIY_P2_SH | |
| - name: 设置LAN IP地址（路由器登录地址） | |
| run: | | |
| cd openwrt | |
| SET_IP=${{ github.event.inputs.LAN_IP }} | |
| if [[ $SET_IP =~ ^(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; then | |
| #修改immortalwrt.lan关联IP | |
| sed -i "s/192\.168\.[0-9]*\.[0-9]*/$SET_IP/g" $(find feeds/luci/modules/luci-mod-system -type f -name "flash.js") | |
| #修改默认IP地址 | |
| sed -i "s/192\.168\.[0-9]*\.[0-9]*/$SET_IP/g" package/base-files/files/bin/config_generate | |
| echo "Set LAN IP Address: $SET_IP" | |
| else | |
| echo "Invalid IP address, use default." | |
| fi | |
| - name: 设置WiFi驱动版本 | |
| run: | | |
| cd openwrt | |
| wifi_driver=$(echo "${{ github.event.inputs.WIFI_DRIVER }}" | sed -E 's/^(v[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+).*/\1/') | |
| firmware=$(echo "${{ github.event.inputs.WIFI_DRIVER }}" | sed -E 's/.*fw-([0-9]{8}|default).*/\1/g') | |
| if [ "$wifi_driver" == "v7.6.6.1" ]; then | |
| sed -i 's/CONFIG_MTK_MT_WIFI_DRIVER_VERSION_7672=y/CONFIG_MTK_MT_WIFI_DRIVER_VERSION_7661=y/g' .config | |
| fi | |
| if [ "$firmware" == "default" ]; then | |
| sed -i 's/CONFIG_MTK_MT_WIFI_MT7986_20240823=y/CONFIG_MTK_MT_WIFI_MT7986_DEFAULT_FIRMWARE=y/g' .config | |
| else | |
| sed -i 's/CONFIG_MTK_MT_WIFI_MT7986_20240823=y/CONFIG_MTK_MT_WIFI_MT7986_${firmware}=y/g' .config | |
| fi | |
| echo "Use WiFi Driver: $wifi_driver-fw-$firmware" | |
| - name: 设置交换机驱动 | |
| run: | | |
| cd openwrt | |
| if [ ${{ github.event.inputs.SW_DRIVER }} == 'DSA' ]; then | |
| cp $GITHUB_WORKSPACE/JDCloud-AX6000-Baili-hanwckf/mt7986a-dsa-jdcloud-re-cp-03.dts target/linux/mediatek/files-5.4/arch/arm64/boot/dts/mediatek/mt7986a-jdcloud-re-cp-03.dts | |
| sed -i '/jdcloud,re-cp-03)/ {n; /eth0/ {s/eth0/lan1 lan2 lan3 lan4/; n; /ucidef_add_switch/ d}}' target/linux/mediatek/mt7986/base-files/etc/board.d/02_network | |
| echo "Use Switch Driver: DSA" | |
| else | |
| echo "Use Switch Driver: GSW" | |
| fi | |
| - name: 使用luci-app-mtk无线配置 | |
| if: github.event.inputs.APP_MTK == 'true' | |
| run: | | |
| cd openwrt | |
| sed -i 's/CONFIG_PACKAGE_luci-app-mtwifi-cfg=y/CONFIG_PACKAGE_luci-app-mtk=y/g' .config | |
| sed -i 's/CONFIG_PACKAGE_luci-i18n-mtwifi-cfg-zh-cn=y/CONFIG_PACKAGE_luci-i18n-mtk-zh-cn=y/g' .config | |
| sed -i 's/CONFIG_PACKAGE_mtwifi-cfg=y/CONFIG_PACKAGE_wifi-profile=y/g' .config | |
| sed -i 's/CONFIG_PACKAGE_lua-cjson=y/CONFIG_WIFI_NORMAL_SETTING=y/g' .config | |
| - name: 取消编译dockerman | |
| if: github.event.inputs.NO_DOCKERMAN == 'true' | |
| run: | | |
| cd openwrt | |
| sed -i '/CONFIG_PACKAGE_luci-app-dockerman=y/d' .config | |
| - name: SSH链接管理 | |
| uses: P3TERX/[email protected] | |
| if: (github.event.inputs.ssh == 'true' && github.event.inputs.ssh != 'false') || contains(github.event.action, 'ssh') | |
| env: | |
| TELEGRAM_CHAT_ID: ${{ secrets.TELEGRAM_CHAT_ID }} | |
| TELEGRAM_BOT_TOKEN: ${{ secrets.TELEGRAM_BOT_TOKEN }} | |
| - name: 下载安装包 | |
| id: package | |
| run: | | |
| cd openwrt | |
| make defconfig | |
| make download -j$(nproc) | |
| find dl -size -1024c -exec ls -l {} \; | |
| find dl -size -1024c -exec rm -f {} \; | |
| - name: 编译固件 | |
| id: compile | |
| run: | | |
| cd openwrt | |
| echo -e "$(nproc) thread compile" | |
| make -j$(nproc) || make -j1 || make -j1 V=s | |
| grep '^CONFIG_TARGET.*DEVICE.*=y' .config | sed -r 's/.*DEVICE_(.*)=y/\1/' > DEVICE_NAME | |
| [ -s DEVICE_NAME ] && echo "DEVICE_NAME=$(cat DEVICE_NAME)" >> $GITHUB_ENV | |
| grep '^CONFIG_TARGET.*DEVICE.*=y' .config | sed -r 's/.*TARGET_.*_(.*)_DEVICE_.*=y/\1/' > TARGET_NAME | |
| [ -s TARGET_NAME ] && echo "TARGET_NAME=$(cat TARGET_NAME)" >> $GITHUB_ENV | |
| sed -n 's/.*lan) ipad=${ipaddr:-"\([0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+\)"} ;;.*/\1/p' package/base-files/files/bin/config_generate | head -n 1 > IP_ADDR | |
| [ -s IP_ADDR ] && echo "IP_ADDR=$(cat IP_ADDR)" >> $GITHUB_ENV | |
| if grep -q 'CONFIG_MTK_MT_WIFI_DRIVER_VERSION_7661=y' .config; then | |
| echo "WIFI_VERSION=-v7661" >> $GITHUB_ENV | |
| else | |
| echo "WIFI_VERSION=-v7672" >> $GITHUB_ENV | |
| fi | |
| if sed -n '/jdcloud,re-cp-03)/,/;;/p' target/linux/mediatek/mt7986/base-files/etc/board.d/02_network | grep -q 'ucidef_add_switch "switch0"'; then | |
| echo "SWITCH=-gsw" >> $GITHUB_ENV | |
| else | |
| echo "SWITCH=-dsa" >> $GITHUB_ENV | |
| fi | |
| if grep -q 'CONFIG_PACKAGE_mtwifi-cfg=y' .config; then | |
| echo "WIFI_INTERFACE=-mtwifi" >> $GITHUB_ENV | |
| else | |
| echo "WIFI_INTERFACE=" >> $GITHUB_ENV | |
| fi | |
| if grep -q 'CONFIG_PACKAGE_luci-app-dockerman=y' .config; then | |
| echo "BUILD_DOCKERMAN=-docker" >> $GITHUB_ENV | |
| else | |
| echo "BUILD_DOCKERMAN=" >> $GITHUB_ENV | |
| fi | |
| echo "FILE_DATE=$(date +"%Y.%m.%d-%H%M")" >> $GITHUB_ENV | |
| echo "status=success" >> $GITHUB_OUTPUT | |
| - name: 查看磁盘使用情况 | |
| if: (!cancelled()) | |
| run: df -hT | |
| - name: 整理文件并重命名 | |
| id: organize | |
| if: env.UPLOAD_FIRMWARE == 'true' && !cancelled() | |
| run: | | |
| cd openwrt/bin/targets/*/* | |
| rm -rf packages | |
| sudo -E apt-get -qq install rename | |
| rename 's/.*${{ env.DEVICE_NAME }}/${{ env.FILE_DATE }}-${{ env.OPENWRT_NAME }}-${{ env.DEVICE_NAME }}${{ env.WIFI_VERSION }}${{ env.SWITCH }}${{ env.BUILD_DOCKERMAN }}/' * | |
| echo "FIRMWARE=$PWD" >> $GITHUB_ENV | |
| echo "status=success" >> $GITHUB_OUTPUT | |
| - name: 打包上传固件到Actions Artifacts | |
| uses: actions/upload-artifact@main | |
| if: steps.organize.outputs.status == 'success' && !cancelled() | |
| with: | |
| name: ${{ env.FILE_DATE }}-${{ env.OPENWRT_NAME }}-${{ env.DEVICE_NAME }}${{ env.WIFI_VERSION }}${{ env.SWITCH }}${{ env.BUILD_DOCKERMAN }} | |
| path: ${{ env.FIRMWARE }} | |
| - name: 生成固件Release标签 | |
| id: tag | |
| if: env.UPLOAD_RELEASE == 'true' && !cancelled() | |
| run: | | |
| touch release.txt | |
| echo "- 使用源码：${{ env.REPO_URL }}" >> release.txt | |
| echo "- 使用分支：${{ env.REPO_BRANCH }}" >> release.txt | |
| echo "- 登录地址：${{ env.IP_ADDR }}" >> release.txt | |
| echo "- 使用WiFi驱动${{ github.event.inputs.WIFI_DRIVER }}" >> release.txt | |
| if [[ "${{ env.SWITCH }}" == '-gsw' ]]; then | |
| echo "- 使用GSW交换机驱动（非DSA）" >> release.txt | |
| else | |
| echo "- 使用DSA交换机驱动" >> release.txt | |
| fi | |
| if [[ "${{ env.WIFI_INTERFACE }}" == '-mtwifi' ]]; then | |
| echo "- 使用hanwckf mtwifi-cfg原生luci无线配置工具" >> release.txt | |
| else | |
| echo "- 使用mtk-sdk luci-app-mtk无线配置工具" >> release.txt | |
| fi | |
| if [[ "${{ env.BUILD_DOCKERMAN }}" == '-docker' ]]; then | |
| echo "- 已编译luci-app-dockerman" >> release.txt | |
| else | |
| echo "- 未编译luci-app-dockerman" >> release.txt | |
| fi | |
| echo "release_tag=${{ env.FILE_DATE }}-${{ env.OPENWRT_NAME }}-${{ env.DEVICE_NAME }}${{ env.WIFI_VERSION }}${{ env.SWITCH }}${{ env.BUILD_DOCKERMAN }}" >> $GITHUB_OUTPUT | |
| echo "status=success" >> $GITHUB_OUTPUT | |
| - name: 发布固件至Release | |
| uses: softprops/[email protected] | |
| if: steps.tag.outputs.status == 'success' && !cancelled() | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| with: | |
| files: ${{ env.FIRMWARE }}/* | |
| name: ${{ env.FILE_DATE }}-${{ env.OPENWRT_NAME }}-${{ env.DEVICE_NAME }}${{ env.WIFI_VERSION }}${{ env.SWITCH }}${{ env.BUILD_DOCKERMAN }} | |
| tag_name: ${{ steps.tag.outputs.release_tag }} | |
| body_path: release.txt |