LulzBot TAZ printer and material profiles for use with PrusaSlicer.
This project intends to create standard LulzBot Taz printer profiles for use with PrusaSlicer. The profiles were originally derived from the LulzBot Cura defaults and have evolved based on PrusaSlicer features and changes.
- LulzBot Taz 5 Single Extruder (0.50mm)
- LulzBot Taz 6 Single Extruder (0.50mm)
- LulzBot Taz Mini Single Extruder (0.50mm)
- LulzBot Taz Mini 2 Aero (0.50mm)
The configuration can be loaded as a configuration bundle through the PrusaSlicer interface. To import the file, select File > Import > Import Config Bundle ... and select the downloaded configuration file.
-
2024-04-24: Updated profiles to work with PrusaSlicer 2.9.2. Adjusted speed and quality parameters based on testing. Specifically, settings for PolyLite PLA increased cooling to reduce swelling and distortion. Speeds were increased for the 0.4mm High Speed Taz profile, which still provides reasonably good quality for larger structural prints.
-
Wipe temperatures for calibration use an expression based on the bed and nozzle temperature of the material. This gets reasonably close to correct wipe temperatures for common materials such as PLA. However, for materials with some higher printing temperatures don't precisely fit the curve.
{temperature[0] * 0.848 + bed_temperature[0] * 0.135 - 36.8}To guarantee that the nozzle is clean, the print will pause following wipe and before probe in all Taz models capable of automatic probing. Probe temperature is fixed at 145 deg C.