From your command line run the following:
sudo pip3 install --upgrade https://github.com/jtubb/cbpi4-ads1x15/archive/main.zip
Requires cbpi>=4.0.0.45, current development branch.
Settings will be added by this plugin:
- Chip: ADS1015 (12 bit resolution) or ADS1115 (16 bit resolution)
- Address: Address of the ADS1x15 device. Boards can be set to one of the following '0x48', '0x49', '0x4a', '0x4b' using hardware jumpers (see datasheet).If no devices are listed ensure you have enabled I2C on your Raspberry PI and check if the device exists in ("/dev/i2c-*")
- Channel (0-3): Input channel to read from.
- Gain: Programmable gain for the chip.
GAIN RANGE (V)
2/3 +/- 6.144 1 +/- 4.096 2 +/- 2.048 4 +/- 1.024 8 +/- 0.512 16 +/- 0.256
- Min_Range - Sensor value to map to 0% output of the sensor.
- Max_Range - Sensor value to map to 100% output of the sensor.
- Read_Mode - Output Raw Value or Range from 0-100
**11.23.22: Initial release