Updated omc image to 1.26.3 (maint_12.x)

.travis.yml

@@ -32,7 +32,7 @@ env:
   global:
     - DOCKER_REPONAME=lbnlblum
     - BUILDINGSPY_VERSION=BuildingsPy@v5.2.0
-    - OMC_VERSION=ubuntu-2204-omc:1.24.0-1
+    - OMC_VERSION=ubuntu-2404-omc:1.26.3-1
     - OPTIMICA_VERSION=travis-ubuntu-2404-optimica:1.66
     - DYMOLA_VERSION=travis_ubuntu-2004_dymola:2025x-x86_64_rev-2
     - ENERGYPLUS_9_6_0=EnergyPlus-9.6.0-f420c06a69-Linux-Ubuntu20.04-x86_64

Buildings/Resources/Scripts/BuildingsPy/conf.yml

@@ -1,3 +1,7 @@
+- model_name: Buildings.Air.Systems.SingleZone.VAV.Examples.OptimalStart.Guideline36Winter
+  openmodelica:
+    comment: 'TimeoutExpired: omc timed out after 300 seconds'
+    time_out: 600
 - model_name: Buildings.Airflow.Multizone.Examples.PressurizationData
   optimica:
     comment: High solver tolerance required to avoid time out.
@@ -6,9 +10,9 @@
   openmodelica:
     comment: 'TimeoutExpired: omc timed out after 300 seconds'
     time_out: 600
-- model_name: Buildings.DHC.ETS.Combined.Subsystems.Validation.Borefield
+- model_name: Buildings.DHC.ETS.Combined.Examples.ChillerBorefield
   openmodelica:
-    comment: Errors as borefield leaving temperature drops below freezing
+    comment: Simulation fails on travis.
     simulate: false
 - model_name: Buildings.DHC.ETS.Combined.Validation.ChillerBorefield
   openmodelica:
@@ -31,50 +35,14 @@
     simulate: false
 - model_name: Buildings.DHC.Examples.Cooling.ElectricChillersDirectETS
   openmodelica:
-    comment: simulation terminated by an assertion at initialization
-    simulate: false
+    comment: translation failed on travis
+    translate: false
   optimica:
     comment: 'FMUException: Failed to update the events at time: 1.578082E+07.'
     simulate: false
-- model_name: Buildings.DHC.Loads.BaseClasses.Examples.CouplingTimeSeries
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
-- model_name: Buildings.DHC.Loads.BaseClasses.Examples.CouplingTimeSeriesSingleLoop
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
-- model_name: Buildings.DHC.Loads.BaseClasses.Validation.BenchmarkFlowDistribution2
-  openmodelica:
-    comment: 'CalledProcessError: Command ''[''omc'', ''Buildings.DHC.Loads.BaseClasses.Validation.BenchmarkFlowDistribution2_translate.mos'']'' returned non-zero exit status 2.'
-    translate: false
-- model_name: Buildings.DHC.Loads.BaseClasses.Validation.FlowDistributionPumpControl
-  openmodelica:
-    comment: 'CalledProcessError: Command ''[''omc'', ''Buildings.DHC.Loads.BaseClasses.Validation.FlowDistributionPumpControl_translate.mos'']'' returned non-zero exit status 2.'
-    translate: false
-- model_name: Buildings.DHC.Loads.Combined.Examples.BuildingTimeSeriesWithETS
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
-- model_name: Buildings.DHC.Loads.Combined.Examples.BuildingTimeSeriesWithETSDHWTank
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
-- model_name: Buildings.DHC.Loads.Cooling.Examples.BuildingTimeSeriesWithETS
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
-- model_name: Buildings.DHC.Loads.Heating.Examples.BuildingTimeSeriesWithETS
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
-- model_name: Buildings.DHC.Networks.Examples.Distribution1PipeExample
-  openmodelica:
-    comment: 'CalledProcessError: Command ''[''omc'', ''Buildings.DHC.Networks.Examples.Distribution1PipeExample_translate.mos'']'' returned non-zero exit status 2.'
-    translate: false
 - model_name: Buildings.DHC.Networks.Examples.Distribution2PipeExample
   openmodelica:
-    comment: 'CalledProcessError: Command ''[''omc'', ''Buildings.DHC.Networks.Examples.Distribution2PipeExample_translate.mos'']'' returned non-zero exit status 2.'
+    comment: translation fails
     translate: false
 - model_name: Buildings.DHC.Plants.Combined.Examples.AllElectricCWStorage
   dymola:
@@ -85,14 +53,14 @@
   optimica:
     time_out: 900
     comment: 'RuntimeError: Process timeout after 600 seconds'
+- model_name: Buildings.DHC.Plants.Combined.Subsystems.Validation.ChillerHeatRecoveryGroup
+  openmodelica:
+    comment: simulation terminated by an assertion at initialization.
+    simulate: false
 - model_name: Buildings.DHC.Plants.Combined.Validation.AllElectricCWStorage
   optimica:
     comment: Simulation times out
     simulate: false
-- model_name: Buildings.DHC.Plants.Steam.BaseClasses.Examples.ControlVolumeEvaporation
-  openmodelica:
-    comment: simulation terminated by an assertion at initialization
-    simulate: false
 - model_name: Buildings.Electrical.AC.ThreePhasesUnbalanced.Validation.IEEETests.Test4NodesFeeder.BalancedStepDown.DD
   openmodelica:
     comment: simulation terminated by an assertion at initialization.
@@ -139,6 +107,10 @@
   optimica:
     comment: Fails with 'The rootfinding function failed in an unrecoverable manner.' Since oct-r26446
     simulate: false
+- model_name: Buildings.Examples.VAVReheat.ASHRAE2006
+  openmodelica:
+    comment: 'TimeoutExpired: Command ''[''omc'', ''Buildings.Examples.VAVReheat.ASHRAE2006_simulate.mos'']'' timed out after 300 seconds'
+    time_out: 600
 - model_name: Buildings.Examples.VAVReheat.Guideline36
   openmodelica:
     comment: Timeout during translation
@@ -177,9 +149,13 @@
   openmodelica:
     comment: timed out after 300 seconds
     simulate: false
-- model_name: Buildings.Fluid.FixedResistances.BuriedPipes.Examples.TwoPipesConduit
+- model_name: Buildings.Fluid.FixedResistances.BuriedPipes.Examples.SingleBuriedPipe
+  openmodelica:
+    comment: 'CalledProcessError: Command ''[''omc'', ''Buildings.Fluid.FixedResistances.BuriedPipes.Examples.SingleBuriedPipe_simulate.mos'']'' returned non-zero exit status 255.'
+    simulate: false
+- model_name: Buildings.Fluid.FixedResistances.BuriedPipes.Examples.TwoBuriedPipes
   openmodelica:
-    comment: Assertion due to what looks like wrong results, see https://github.com/lbl-srg/modelica-buildings/issues/3687
+    comment: 'CalledProcessError: Command ''[''omc'', ''Buildings.Fluid.FixedResistances.BuriedPipes.Examples.TwoBuriedPipes_simulate.mos'']'' returned non-zero exit status 255.'
     simulate: false
 - model_name: Buildings.Fluid.FixedResistances.BuriedPipes.Validation.GroundCouplingAIT
   openmodelica:
@@ -203,51 +179,49 @@
     time_out: 600
 - model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Examples.SeriesConnectedZones
   openmodelica:
-    comment: Translation timeout after 600 s
-    translate: false
-  optimica:
-    comment: Timeout on travis after 600s during translation
-    translate: false
-- model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.InletTemperaturePulse
-  openmodelica:
-    comment: Failure in evaluating borCon == Buildings.Fluid.Geothermal.Borefields.Types.BoreholeConfiguration.DoubleUTubeParallel
-    translate: false
+    comment: 'TimeoutExpired: Command ''[''omc'', ''Buildings.Fluid.Geothermal.ZonedBorefields.Examples.SeriesConnectedZones_simulate.mos'']'' timed out after 300 seconds'
+    time_out: 600
   optimica:
     comment: Timeout after 300 s
     time_out: 600
-- model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.MassFlowRatePulse100
+- model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.InletTemperaturePulse
   openmodelica:
-    comment: Failure in evaluating borCon == Buildings.Fluid.Geothermal.Borefields.Types.BoreholeConfiguration.DoubleUTubeParallel
+    comment: 'TimeoutExpired: Command ''[''omc'', ''Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.InletTemperaturePulse_simulate.mos'']'' timed out after 300 seconds'
+    time_out: 600
+  optimica:
     translate: false
+    comment: Not enough memory on travis
+- model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.MassFlowRatePulse100
   optimica:
-    comment: Timeout on travis after 600s during translation
     translate: false
+    comment: Not enough memory on travis
 - model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.MassFlowRatePulse50
-  openmodelica:
-    comment: Failure in evaluating borCon == Buildings.Fluid.Geothermal.Borefields.Types.BoreholeConfiguration.DoubleUTubeParallel
-    translate: false
   optimica:
-    comment: MemoryError during compilation, it is likely that the process ran out of memory.
     translate: false
+    comment: Not enough memory on travis
 - model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.FEFLOW.MassFlowRateStep100
-  openmodelica:
-    comment: Failure in evaluating borCon == Buildings.Fluid.Geothermal.Borefields.Types.BoreholeConfiguration.DoubleUTubeParallel
-    translate: false
   optimica:
-    comment: MemoryError during compilation, it is likely that the process ran out of memory.
     translate: false
+    comment: Not enough memory on travis
+- model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.SteadyStateBoreholeDynamics
+  openmodelica:
+    comment: 'TimeoutExpired: Command ''[''omc'', ''Buildings.Fluid.Geothermal.ZonedBorefields.Validation.SteadyStateBoreholeDynamics_simulate.mos'']'' timed out after 300 seconds'
+    time_out: 600
 - model_name: Buildings.Fluid.Geothermal.ZonedBorefields.Validation.TransientBoreholeDynamics
   dymola:
     time_out: 600
   openmodelica:
     time_out: 600
-- model_name: Buildings.Fluid.HeatPumps.ModularReversible.Examples.LargeScaleWaterToWater_OneRoomRadiator
+- model_name: Buildings.Fluid.HeatExchangers.Radiators.Examples.RadiatorEN442_2
   openmodelica:
-    comment: simulation terminated by an assertion at initialization.
-    simulate: false
+    comment: Translation failed. See https://github.com/OpenModelica/OpenModelica/issues/14791
+    translate: false
 - model_name: Buildings.Fluid.HydronicConfigurations.ActiveNetworks.Examples.DecouplingMixing
+  openmodelica:
+    comment: Timeout after 300 s. See also OpenModelica, issue 13341
+    simulate: false
   optimica:
-    comment: 'CVodeError: The rootfinding function failed in an unrecoverable manner. At time 32392.196613.'
+    comment: 'CVodeError: ''The rootfinding function failed in an unrecoverable manner. At time 32392.196613.'''
     simulate: false
 - model_name: Buildings.Fluid.HydronicConfigurations.ActiveNetworks.Examples.DiversionOpenLoop
   optimica:
@@ -298,15 +272,9 @@
     comment: Timeout on travis
     time_out: 900
 - model_name: Buildings.Obsolete.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.IdealHeatingCoolingSpring
-  openmodelica:
-    comment: returned non-zero exit status 255.
-    simulate: false
   optimica:
     rtol: 1.0e-08
 - model_name: Buildings.Obsolete.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.IdealHeatingCoolingSummer
-  openmodelica:
-    comment: returned non-zero exit status 255.
-    simulate: false
   optimica:
     rtol: 1.0e-07
 - model_name: Buildings.Obsolete.ThermalZones.EnergyPlus_9_6_0.Examples.SmallOffice.IdealHeatingCoolingWinter
@@ -326,14 +294,6 @@
   optimica:
     comment: Translation warning. Access to component not in constrained type, https://github.com/lbl-srg/modelica-buildings/issues/4497.
     translate: false
-- model_name: Buildings.Templates.Components.Chillers.Validation.Compression
-  openmodelica:
-    comment: Translation failed.
-    translate: false
-- model_name: Buildings.Templates.Components.Validation.PumpMultipleRecord
-  openmodelica:
-    comment: Translation failed.
-    translate: false
 - model_name: Buildings.Templates.Components.Validation.Pumps
   openmodelica:
     comment: Translation failed.
@@ -441,30 +401,21 @@
     comment: Timeout on travis, https://app.travis-ci.com/github/lbl-srg/modelica-buildings/jobs/615261256
     time_out: 600
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.BaseClasses.Validation.FMUZoneAdapterZones1
-  openmodelica:
-    comment: 'Could not load the FMU binary: libc.so.6: version `GLIBC_2.34'' not found'
-    simulate: false
   dymola:
     comment: Requires docker update to Ubuntu 22.04 due to libgc.
     simulate: false
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.BaseClasses.Validation.FMUZoneAdapterZones2
-  openmodelica:
-    comment: 'Could not load the FMU binary: libc.so.6: version `GLIBC_2.34'' not found'
-    simulate: false
   dymola:
     comment: Requires docker update to Ubuntu 22.04 due to libgc.
     simulate: false
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.BaseClasses.Validation.FMUZoneAdapterZones3
-  openmodelica:
-    comment: 'Could not load the FMU binary: libc.so.6: version `GLIBC_2.34'' not found'
-    simulate: false
   dymola:
     comment: Requires docker update to Ubuntu 22.04 due to libgc.
     simulate: false
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.ASHRAE2006Spring
   openmodelica:
-    comment: timed out after 600 seconds on travis but works locally
-    simulate: false
+    comment: timed out after 300 seconds
+    time_out: 600
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.ASHRAE2006Summer
   openmodelica:
     comment: timed out after 300 seconds
@@ -475,22 +426,15 @@
     time_out: 600
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.Guideline36Summer
   openmodelica:
-    comment: timed out after 300 seconds
-    time_out: 600
+    comment: timed out after 600 seconds
+    time_out: 900
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.Guideline36Winter
   openmodelica:
     comment: Timeout on travis after 600 s
     simulate: false
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.IdealHeatingCoolingSpring
-  openmodelica:
-    comment: returned non-zero exit status 255.
-    simulate: false
   optimica:
     rtol: 1.0e-08
-- model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.IdealHeatingCoolingSummer
-  openmodelica:
-    comment: returned non-zero exit status 255.
-    simulate: false
 - model_name: Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SmallOffice.IdealHeatingCoolingWinter
   optimica:
     rtol: 1.0e-08