rework old scripts & merge scripts

scripts/Lite_protocol_scripts/store/nodes_15_scenario2.sh

@@ -0,0 +1,151 @@
+#!/bin/bash
+set -e
+if ! typeset -f wn >/dev/null 2>&1; then
+  wn() { docker compose "$@"; }
+fi
+# - waku-simulator: 15-node network, 1 service, 1 edge
+# - Service node limited by env below (CPU cores 0-3; memory 512 MiB)
+# - Phases driven by LPT; Sonda runs throughout to exercise Store
+# - This variant stresses CPU more and uses 120s observe windows
+
+echo " Running test..."
+
+# -------------------- Bring up simulator ------------------------
+cd ./waku-simulator
+
+export NWAKU_IMAGE=wakuorg/nwaku:latest
+export NUM_NWAKU_NODES=15
+export RLN_ENABLED=false
+
+export SERVICENODE_CPU_CORES="0-3"
+export SERVICENODE_MEM_LIMIT=512m
+export POSTGRES_CPU_CORES="0-3"
+export POSTGRES_MEM_LIMIT=2g
+export POSTGRES_SHM=1g
+
+docker compose up -d
+
+# Wait until service node is running
+while true; do
+  sid="$(docker compose ps -q servicenode || true)"
+  if [[ -n "$sid" ]]; then
+    state="$(docker inspect --format '{{.State.Status}}' "$sid" 2>/dev/null || true)"
+    [[ "$state" == "running" ]] && break
+  fi
+  sleep 1
+done
+
+cd ../lpt
+
+# -------------------- LPT common knobs (same exports) -------------------------
+export LPT_IMAGE=harbor.status.im/wakuorg/liteprotocoltester:latest
+export START_PUBLISHING_AFTER=15
+export NUM_MESSAGES=0
+export MESSAGE_INTERVAL_MILLIS=100
+
+export MIN_MESSAGE_SIZE=120Kb
+export MAX_MESSAGE_SIZE=145Kb
+
+export LIGHTPUSH_SERVICE_PEER=/ip4/10.2.0.101/tcp/60001/p2p/16Uiu2HAkyte8uj451tGkbww4Mjcg6DRnmAHxNeWyF4zp23RbpG3n
+export FILTER_SERVICE_PEER=/ip4/10.2.0.101/tcp/60001/p2p/16Uiu2HAkyte8uj451tGkbww4Mjcg6DRnmAHxNeWyF4zp23RbpG3n
+
+export PUBSUB=/waku/2/rs/66/0
+export CONTENT_TOPIC=/tester/2/light-pubsub-test/wakusim
+export CLUSTER_ID=66
+
+# wait time  before starting traffic
+sleep 60
+
+
+# -------------------- Sonda (Store monitor) -----------------------------------
+cd ../sonda
+
+docker build -t local-perf-sonda -f ./Dockerfile.sonda .
+
+# perf-test.env 
+cat <<EOF > perf-test.env
+RELAY_NODE_REST_ADDRESS=http://127.0.0.1:8645
+STORE_NODE_REST_ADDRESS=http://127.0.0.1:8644
+QUERY_DELAY=0.5
+STORE_NODES=/ip4/10.2.0.101/tcp/60001/p2p/16Uiu2HAkyte8uj451tGkbww4Mjcg6DRnmAHxNeWyF4zp23RbpG3n
+CLUSTER_ID=66
+SHARD=0
+EOF
+
+sleep 5
+
+docker rm -f sonda >/dev/null 2>&1 || true
+docker run --env-file ./perf-test.env -l sonda -d --network host local-perf-sonda
+
+cd ../lpt
+
+# -------------------- Phase 1: 6 pub / 6 recv --------------------------------
+export NUM_PUBLISHER_NODES=6
+export NUM_RECEIVER_NODES=6
+docker compose down -v >/dev/null 2>&1 || true
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] LPT is running with 6 publishers and 6 receivers + sonda from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 2: 3 pub / 12 recv -------------------------------
+docker compose down -v
+export NUM_PUBLISHER_NODES=3
+export NUM_RECEIVER_NODES=12
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] LPT is running with 3 publishers and 12 receivers from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 3: 12 pub / 3 recv -------------------------------
+docker compose down -v
+export NUM_PUBLISHER_NODES=12
+export NUM_RECEIVER_NODES=3
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] LPT is running with 12 publishers and 3 receivers from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 4: receivers down; keep publisher + sonda --------
+docker compose down -v
+export NUM_PUBLISHER_NODES=12
+export NUM_RECEIVER_NODES=0
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] LPT receivers are down; sonda and lightpush publisher running from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 5: LPT down; only sonda --------------------------
+docker compose down -v
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] LPT down; only sonda is working from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 6: final high-load burst  -----------------
+
+export NUM_PUBLISHER_NODES=12
+export NUM_RECEIVER_NODES=12
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] Final burst: LPT running with 12 publishers and 12 receivers from now: $current_time"
+
+sleep 120
+
+cd ..
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "[test] Test finished at $current_time"
+
+# finish
+# exec ./stop_test.sh

scripts/Lite_protocol_scripts/store/nodes_15_service_1.sh

@@ -0,0 +1,140 @@
+#!/bin/bash
+set -e
+
+# - waku-simulator: 15-node network, 1 service, 1 edge
+# - Service node limited by env below (CPU cores 0-3; memory 512 MiB)
+# - Phases driven by LPT; Sonda runs throughout to exercise Store
+# - This variant stresses CPU more and uses 120s observe windows
+
+echo "Running test..."
+
+# -------------------- Bring up simulator ------------------------
+cd ./waku-simulator
+
+export NWAKU_IMAGE=wakuorg/nwaku:latest
+export NUM_NWAKU_NODES=15
+export RLN_ENABLED=false
+
+export SERVICENODE_CPU_CORES="0-3"
+export SERVICENODE_MEM_LIMIT=512m
+export POSTGRES_CPU_CORES="0-3"
+export POSTGRES_MEM_LIMIT=2g
+export POSTGRES_SHM=1g
+
+docker compose up -d
+
+# Wait until service node is running
+while true; do
+  sid="$(docker compose ps -q servicenode || true)"
+  if [[ -n "$sid" ]]; then
+    state="$(docker inspect --format '{{.State.Status}}' "$sid" 2>/dev/null || true)"
+    [[ "$state" == "running" ]] && break
+  fi
+  sleep 1
+done
+
+cd ../lpt
+
+# -------------------- LPT common knobs  -------------------------
+export LPT_IMAGE=harbor.status.im/wakuorg/liteprotocoltester:latest
+export START_PUBLISHING_AFTER=15
+export NUM_MESSAGES=0
+export MESSAGE_INTERVAL_MILLIS=100
+
+export MIN_MESSAGE_SIZE=120Kb
+export MAX_MESSAGE_SIZE=145Kb
+
+export LIGHTPUSH_SERVICE_PEER=/ip4/10.2.0.101/tcp/60001/p2p/16Uiu2HAkyte8uj451tGkbww4Mjcg6DRnmAHxNeWyF4zp23RbpG3n
+export FILTER_SERVICE_PEER=/ip4/10.2.0.101/tcp/60001/p2p/16Uiu2HAkyte8uj451tGkbww4Mjcg6DRnmAHxNeWyF4zp23RbpG3n
+
+export PUBSUB=/waku/2/rs/66/0
+export CONTENT_TOPIC=/tester/2/light-pubsub-test/wakusim
+export CLUSTER_ID=66
+
+# wait time  before starting traffic
+sleep 60
+
+# Start LPT for Phase 1 will happen after Sonda is up
+
+# -------------------- Sonda (Store monitor) -----------------------------------
+cd ../sonda
+
+docker build -t local-perf-sonda -f ./Dockerfile.sonda .
+
+# perf-test.env 
+cat <<EOF > perf-test.env
+RELAY_NODE_REST_ADDRESS=http://127.0.0.1:8645
+STORE_NODE_REST_ADDRESS=http://127.0.0.1:8644
+QUERY_DELAY=0.5
+STORE_NODES=/ip4/10.2.0.101/tcp/60001/p2p/16Uiu2HAkyte8uj451tGkbww4Mjcg6DRnmAHxNeWyF4zp23RbpG3n
+CLUSTER_ID=66
+SHARD=0
+EOF
+
+sleep 5
+
+docker rm -f sonda >/dev/null 2>&1 || true
+docker run --env-file ./perf-test.env -l sonda -d --network host local-perf-sonda
+
+cd ../lpt
+
+# -------------------- Phase 1: 6 pub / 6 recv --------------------------------
+export NUM_PUBLISHER_NODES=6
+export NUM_RECEIVER_NODES=6
+docker compose down -v >/dev/null 2>&1 || true
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "LPT is running with 6 publishers and 6 receivers + sonda from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 2: 3 pub / 12 recv -------------------------------
+docker compose down -v
+export NUM_PUBLISHER_NODES=3
+export NUM_RECEIVER_NODES=12
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "LPT is running with 3 publishers and 12 receivers from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 3: 12 pub / 3 recv -------------------------------
+docker compose down -v
+export NUM_PUBLISHER_NODES=12
+export NUM_RECEIVER_NODES=3
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "LPT is running with 12 publishers and 3 receivers from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 4: receivers down; keep publisher + sonda --------
+docker compose down -v
+export NUM_PUBLISHER_NODES=12
+export NUM_RECEIVER_NODES=0
+docker compose up -d
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "LPT receivers are down; sonda and lightpush publisher running from now: $current_time"
+
+sleep 120
+
+# -------------------- Phase 5: LPT down; only sonda --------------------------
+docker compose down -v
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "LPT down; only sonda is working from now: $current_time"
+
+sleep 120
+
+cd ..
+
+current_time=$(date +"%Y-%m-%d %H:%M:%S")
+echo "Test finished at $current_time"
+
+# finish
+# exec ./stop_test.sh
+s