Interfacing with the Auxiliary Telescope dome hardware.

SITCOMTN-094

There are several different ways to interface with the hardware that controls the Auxiliary Telescope dome. This technote describes how these are done.

Links:

• Publication URL: https://sitcomtn-094.lsst.io/
• Alternative editions: https://sitcomtn-094.lsst.io/v
• GitHub repository: https://github.com/lsst-sitcom/sitcomtn-094
• Build system: https://github.com/lsst-sitcom/sitcomtn-094/actions/

Build this technical note

You can clone this repository and build the technote locally if your system has Python 3.11 or later:

git clone https://github.com/lsst-sitcom/sitcomtn-094
cd sitcomtn-094
make init
make html

Repeat the make html command to rebuild the technote after making changes. If you need to delete any intermediate files for a clean build, run make clean.

The built technote is located at _build/html/index.html.

Publishing changes to the web

This technote is published to https://sitcomtn-094.lsst.io/ whenever you push changes to the main branch on GitHub. When you push changes to a another branch, a preview of the technote is published to https://sitcomtn-094.lsst.io/v.

Editing this technical note

The main content of this technote is in index.rst (a reStructuredText file). Metadata and configuration is in the technote.toml file. For guidance on creating content and information about specifying metadata and configuration, see the Documenteer documentation: https://documenteer.lsst.io/technotes.