Registers Clipboard

Sharing clipboards between kakoune clients (e.g. tmux panes)

If your kak clients are connected to the same session (either created through :new inside supported windowing managers or explicitly by running in client mode kak -c <session>), registers are shared, so copy paste should work directly, without needing to use the system clipboard.

Using the system clipboard

Pasting directly to the terminal

If you are pasting directly into the terminal, you can use \ before the edit mode (e.g. \i) to prevent hooks from interfering with indentation.

Using a clipboard tool

You can use kakoune with system clipboard tools like xsel, xclip or pbcopy/pbpaste (macOS). See xsel vs xclip.

On OS X, you can also use osxsnarf. This is a bit more complicated, but has the advantage that you can forward your clipboard access to other (not necessarily OS X) machines. In this case, the commands are 9 9p write snarf/snarf and 9 9p read snarf/snarf.

On Windows, you can use clip.exe (in the path by default) to save to system clipboard, e.g. when using WSL. Unfortunately it does not provide the functionality to read from the clipboard. To read from the clipboard you can invoke Get-Clipboard via Powershell. The output in this case will have Windows-style line endings which can be removed with tr or similar programs i.e. powershell.exe Get-Clipboard | tr -d "\r".

You can also sync with the paste buffer in tmux with save-buffer and show-buffer commands, as shown below.

Yanking and pasting with user mode binds

map global user y '<a-|>xsel --input --clipboard<ret>'
map global user P '!xsel --output --clipboard<ret>'
map global user p '<a-!>xsel --output --clipboard<ret>'
map global user R '|xsel --output --clipboard<ret>'

Now you can:

• y/p - paste from internal clipboard
• <space>y - yank from system clipboard (<space> is default for user mode)
• <space>p - paste after from system clipboard
• <space>P - paste before from system clipboard
• <space>R - replace selection from system clipboard

<a-|> pipes each selection through the given external filter program and ignore its output.

You can replace xsel --input --clipboard with:

• xclip -in -selection clipboard >&- 2>&- if you prefer xclip
• wl-copy > /dev/null 2>&1 & for Wayland's equivalent
• pbcopy for macOS equivalent
• clip.exe for Windows

! inserts program output before selection while <a-!> inserts program output after selection.

You can replace xsel --output --clipboard with:

• wl-paste -n for Wayland's equivalent
• pbpaste for macOS equivalent
• tmux show-buffer for tmux
• powershell.exe Get-Clipboard | tr -d "\r" for Windows (WSL)

Yanking to system clipboard automatically

If your copy of Kakoune is newer than July 2020, you can use the RegisterModified hook to automatically update the system clipboard whenever you yank, delete, change, or otherwise update the default change register (", the double-quote register):

hook global RegisterModified '"' %{ nop %sh{
  printf %s "$kak_main_reg_dquote" | xsel --input --clipboard
}}

If your copy of Kakoune is older, you can get nearly the same effect by hooking the y, d, and c keys directly:

hook global NormalKey y|d|c %{ nop %sh{
  printf %s "$kak_main_reg_dquote" | xsel --input --clipboard
}}

Because tmux doesn't accept buffer data on standard input, you need to replace that entire line with::

tmux set-buffer -- "$kak_main_reg_dquote"

If you use the same Kakoune configuration in different environments, you may want to intelligently decide which clipboard to try to copy to:

if [ -n "$DISPLAY" ]; then
    printf %s "$kak_main_reg_dquote" | xsel --input --clipboard
elif [ -n "$TMUX" ]; then
    tmux set-buffer -- "$kak_main_reg_dquote"
fi

Paste with mouse middle click

Requires at least Kakoune v2020.08.04.

hook global RawKey <mouse:press:middle:.*> %{ exec !xclip<space>-o<ret> }

Yank using terminal escape sequences (OSC 52)

Some terminals and tmux also allow setting the system clipboard (or tmux buffer) by sending a special escape sequence to the terminal. This also allows forwarding through SSH sessions if you are running kakoune on a remote server. See this post for setup instructions.

Linewise vs characterwise

If the content of the register you're about to paste ends with a new line char \n, the p command effect will be transformed from a InputMode::Append to InsertMode::InsertAtNextLineBegin meanwhile a P command effect will be transformed from a InputMode::Insert to InsertMode::InsertAtLineBegin.

There's no easy way to avoid this behavior. So use the _ trim command before yanking a line you need to be pasted on the same line than your target.

Plugins

• https://github.com/NNBnh/clipb.kak
• https://github.com/lePerdu/kakboard

Sharing data across sessions without using the system clipboard

The following command allows setting a given register in another Kakoune session with the contents of the current selection. It allows virtually “sending” a selection over, when copying it to the system clipboard would clump it down, or if overriding the system clipboard isn’t desirable.

define-command -params 2.. -docstring %{
    send-selection-to-session-register <register> <session>: assign the current selection to the given register of the target session
} -shell-script-candidates %{
    case "$kak_token_to_complete" in
        0) printf 'arobase\ncaret\ncolon\ndot\ndquote\nhash\npercent\npipe\nslash\nunderscore\n';;
        1)
            if [ -n "${XDG_RUNTIME_DIR}" ]; then
                ls -1 "${XDG_RUNTIME_DIR}"/kakoune/
            else
                ls -1 "${TMPDIR:-/tmp}"/kakoune-"${USER}"/
            fi
            ;;
    esac
} send-selection-to-session-register %{
    evaluate-commands -save-regs m %{
        execute-keys \"my
        edit -scratch
        execute-keys \"m<a-R>

        try %{
            execute-keys -draft s "'" <ret> yP
        }
        execute-keys i " '" <esc> a "'" <esc> gg i "reg %arg{1} " <esc> <percent>
        execute-keys <a-|> " kak -p %arg{2}" <ret>
        delete-buffer
    }
}

Example usage:

1. select that data to send over to another session
2. call :send-selection-to-session-register dquote <session>
3. in a client of the target session (whose name was passed to the command above), hit a-p