Meshtastic Protobufs v2.7.24

What's Changed

• ci: switch NPM publish to npm trusted publishing (OIDC) by @danditomaso in #900
• add heltec-v4-r8 board by @Quency-D in #898
• Add SerialHal proto definitions by @jp-bennett in #903
• More serialHal protos by @jp-bennett in #904
• add MMC5983MA and ICM-42670-P sensors by @Quency-D in #909
• Add heltec-mesh-node-t1 product by @Quency-D in #908
• Add LockdownAuth and LockdownStatus messages for hardened firmware builds by @niccellular in #911
• Add lilygo T-Impulse-Plus by @vidplace7 in #918
• Deprecate ModuleConfig.MQTTConfig.json_enabled after MQTT JSON removal by @Copilot in #890
• Add rotated SH1107 display type by @Stary2001 in #913
• Add T_ECHO_CARD identifier to mesh.proto by @caveman99 in #919
• master: Split ITU regions for 2M ham bands by @vidplace7 in #923

New Contributors

• @Copilot made their first contribution in #890
• @Stary2001 made their first contribution in #913

Full Changelog: v2.7.23...v2.7.24

v2.7.23

New Regions (EU866, EU_NARROW) + New Presets (Lite, Narrow) (#824)

* new new_presets

* Update comments for frequency bands

Per @fifieldt

* remove hamfast

* Clean up config.proto by removing extra newline

Removed unnecessary blank spaces before EU 866MHz comment.

* Removed US 433MHz Amateur Use band

removing ham settings for now.

* Update EU 866MHz band references and descriptions in config.proto

* Whitespace

* format again

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>

Meshtastic Protobufs v2.7.22

What's Changed

• Add Hardware Model for T1000-E-Pro by @SeeedZhangyh in #884
• Add ATAK Plugin TAKPacket V2 protobufs and expand CoT enums by @thebentern in #887
• Feat/add one wire i2c bridge by @oscgonfer in #885
• Takv2 geometry and other structures by @thebentern in #891
• Remote Shell Protobufs by @jp-bennett in #892
• Multiple one wire channels by @oscgonfer in #886
• add THINKNODE device IDs by @caveman99 in #893

New Contributors

• @SeeedZhangyh made their first contribution in #884

Full Changelog: v2.7.21...v2.7.22

Meshtastic Protobufs v2.7.21

What's Changed

• Add GroupAlarm app portnum by @DasAuryn in #876
• Enhancement/sht sensor consolidation by @oscgonfer in #873
• Update prost dependencies to 0.14.3 to address known CVE by @danditomaso in #879
• add heltec-mesh-node-t096 board by @Quency-D in #878

New Contributors

• @DasAuryn made their first contribution in #876

Full Changelog: v2.7.20...v2.7.21

v2.7.20

What's Changed

• Add SCD30 CO2 sensor by @oscgonfer in #861
• Add LilyGo T-Beam BPF by @vidplace7 in #864
• Add T-mini ePaper S3 Kit HW id by @mverch67 in #863
• enhancement: Add ATAKConfig for on-device TAK team/role config by @niccellular in #866
• Add the LORA FEM control variable. by @Quency-D in #869
• Add LORAWAN_BRIDGE enum value to portnums.proto by @caveman99 in #871
• Add LilyGo T-Display S3 Pro HW-ID by @mverch67 in #872

New Contributors

• @niccellular made their first contribution in #866

Full Changelog: v2.7.19...v2.7.20

Meshtastic Protobufs v2.7.19

What's Changed

• feat/sen5x-state-proto by @oscgonfer in #750
• Bubbles pref by @thebentern in #856
• Refactor CI publish workflow and remove Rust support by @danditomaso in #853
• Fix JSR publish by adding .ts import extensions by @danditomaso in #858
• Add SHT21 sensor to TelemetrySensorType by @Tomas-Kuchta-FPV in #855
• Add HDC1080 to telemetry protobuf by @yarbschris in #845
• Add STC31 CO2 sensor to TelemetrySensorType enum by @thebentern in #859
• Add protobufs for a in-development traffic management module. by @h3lix1 in #849

New Contributors

• @Tomas-Kuchta-FPV made their first contribution in #855
• @yarbschris made their first contribution in #845
• @h3lix1 made their first contribution in #849

Full Changelog: v2.7.18...v2.7.19

Meshtastic Protobufs v2.7.18

What's Changed

• Add chain_count field to mesh.proto by @jp-bennett in #828
• Meshtastic ota by @jake-b in #829
• T-Echo Plus by @thebentern in #833
• Add PKI_SEND_FAIL_PUBLIC_KEY error code by @jp-bennett in #834
• Add MESHSTICK_1262 identifier to mesh.proto by @jp-bennett in #839
• Mute: Nodes by @ford-jones in #838
• Add module config to enable air quality on screen by @oscgonfer in #840
• Serial modes - Logging by @DaneEvans in #841
• Add T-Beam 1W by @rcarteraz in #842
• (Updated comment only.) CLIENT_BASE now acts as ROUTER_LATE, not ROUTER by @compumike in #843
• Add T5 S3 ePaper Pro HW-ID by @mverch67 in #844
• Add StatusMessage message and portnum by @jp-bennett in #835
• [Bugfix] Use correct option name by @erayd in #848
• Add noise_floor float field to LocalStats message by @RCGV1 in #846
• Add missed StatusMessage protobufs, mainly for config by @jp-bennett in #847

New Contributors

• @DaneEvans made their first contribution in #841
• @RCGV1 made their first contribution in #846

Full Changelog: v2.7.17...v2.7.18

Meshtastic Protobufs v2.7.17

What's Changed

• Rename RESERVED_FRIED_CHICKEN to MUZI_BASE by @rcarteraz in #819
• Add LONG_TURBO preset to config.proto by @jp-bennett in #820
• Deprecate LONG_SLOW preset by @thebentern in #821
• Add Store and Forward PlusPlus by @jp-bennett in #822
• Add reboot_ota_mode to AdminMessage for OTA firmware updates by @thebentern in #823

Full Changelog: v2.7.16...v2.7.17

Meshtastic Protobufs v2.7.16

What's Changed

• Add Thinknode M4 and M6 to the equation by @caveman99 in #815

Full Changelog: v2.7.15...v2.7.16

Meshtastic Protobufs v2.7.15

What's Changed

• Add Device ID for RAK6421 Hat in mesh.proto by @jp-bennett in #812
• Describe further the "to" field in MeshPacket by @andrewdavidmackenzie in #811

New Contributors

• @andrewdavidmackenzie made their first contribution in #811

Full Changelog: v2.7.14...v2.7.15