Full-range speaker audio reference monitor https://www.youtube.com/watch?v=8o_F5kkb7Os
WARNING: Inkscape Vector Graphic Editor renders incorrect lengths.
1 - Cut speaker cabinet parts using CNC router.
IMPORTANT: The area between circles on the baffle needs to be carved using CNC by 3mm. The thickness of the enclosure material should be 18mm.
WARNING: СNC drawings NOT include chamfers. Type and chamfer style at the discretion of the DIYer.
2 - Glue speaker cabinet parts together.
SUGGESTION: Use medium drying adhesive
3 - Prepare and glue the port to the speaker cabinet.
Port length: 83.27mm
Port diameter: 24.6mm
4 - Solder Belden 1307A 16AWG cable directly to the speaker and Amplenol SP-2-MD speaker connector.
SUGGESTION: The length of the cable should be short to prevent parasitic vibrations inside the speaker cabinet.
5 - Fasten the speaker and speaker connector to the cabinet.
Cast Frame #8-32 Speaker Mounting Kit
Port Tube 1" ID x 4" L Flared
Amphenol SP-2-MD Speaker Connector 2 Pole "D" Flange Panel Mount Black
Amphenol SP-2-F Loudspeaker Cable Connector 2 Pole
Belden 1307A 16AWG Сable
Dayton Audio RS100-8 4" Reference Full-Range Driver 8 Ohm